Wyze Cam V1/V2 Outdoor Camera Housing

botmount-bot-nolens-v3.stl

Awning Lantern Holder

This is a lantern holder for my awning. The awnings pillar diameter is about 245mm. If you need a different diameter - just ask me. I may also make the fusion file parametric and provide it for free.

I designet this file so it can be mounted with a M3 screw and nut directly through a pillar hole. I just noticed that i dont need the nut because i can directly screw into the resin.

Feel free to give some feedback. I am happy do improve my work

Seed Splitter Spitter

Seed Splitter Spitter
This is an easy and clean way to enjoy your favorite sunflower seeds inside! I designed the interior to be a sphere with four chambers for air release so that your shells don't blow back in your mouth.
To clean, just fill to before the openings on the side, and dump your shells outside.

Pistol Crossbow Bolts, 6.3 and 6.5 inch

6.3 inch bolt Style 1.STL

Murder in the Dark Game Necklace Tokens

Tokens-Murderer.stl

Small Flower Pinwheel

flowerb-bearing.STL

Golf Tees

Golf TEES.stl

Planter “Sylvatica Tree”

Planter.stl

Modern Vase 

Hello friends, this is a simple Vase in a particular shape. 
Hope you like it

Planter castle

**A castle inspired planter with water drainage via the moat.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 153 x 157 x 102 mm with a inner size of ca 96x96x90mm and a wall thickness/small feature diameter of 2mm minimum
- Downscaling (99% – 61%): works great
Minimum size (60%):  62 x 65 x 61 mm with a inner size of ca 58x58x54mm and a wall thickness/small feature diameter of 1.2mm minimum
- Everything smaller than that is not tested but maybe possible :D

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 200g
Print time: 16h (100% scale): 16h

Material usage (60% scale): 50g
Print time: 16h (60% scale): 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, callibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

Castleplanter.stl

Watering can

watering_can_1,3L.stl

Trampoline Water Sprayer #OutdoorThangs

A water sprayer for your trampoline that connects to an owl eye sprinkler. 

Trampoline Water Sprayer

Chest Hook for Sackpack

Revolutionize your outdoor adventures with this innovative solution designed to keep your sackpack secure and comfortable. Say goodbye to frustrating strap slippage and constant readjustments!

The Chest Hook is the perfect accessory for hikers, runners, and anyone who loves exploring the great outdoors. Its sleek and ergonomic design ensures a snug fit while distributing weight evenly across your chest, providing unmatched stability and freedom of movement.

No more interruptions to your outdoor activities due to shoulder straps falling off or coming apart. The Chest Hook securely fastens your sackpack in place, allowing you to focus on enjoying the journey without distractions. It's a game-changer for those who value convenience and reliability.

Crafted with high-quality materials, the Chest Hook offers durability and strength. I printed it with Silk Silver PLA, providing excellent resistance and ensuring it can withstand the demands of your outdoor adventures.

The Chest Hook features a lightweight design that adds minimal extra weight to your pack, guaranteeing optimal comfort during extended wear.

Installing the Chest Hook is a breeze. Simply attach it to your sackpack's shoulder straps, and you're ready to go. It offers adjustable positioning for a customizable fit, accommodating various torso sizes and pack styles.

Enhance your outdoor experience and bid farewell to sagging, slipping straps. Choose the Chest Hook for Sackpack and enjoy worry-free adventures with unrivaled convenience and reliability. Upgrade your gear today and experience the difference for yourself!

This model have been designed to overcome my own frustration with these bags and for 🏕️ The Great Outdoors Contest 🌲 #OutdoorThangs

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Rectangle cap catcher.stl

**NO SUPPORTS NEEDED**
This one's a longer print but can be reduced with a big nozzle and on some printers, vase mode (spiralize outer contour for my fellow cura peeps out there.)

this is a model that I made a LONG time ago for those bottle openers that mount to a wall and drop the caps, meaning they fall to the floor and are a pain to pick up or are in an annoying place to prevent it falling to the floor (above a table or low down meaning it's "not much further to grab the cap off the floor"). this model comes with a draining hole for all the different liquids that may end up in there whether it's rain, beer, juice of some kind or in some country's, tomato sauce. Simply place 2 screws/nails into wall where you want to mount it under bottle opener. (I place on wall and use a pencil to mark holes) then slide on and push down to secure. When full, slide up and pull out to remove. empty into bin and slide back on. 
have fun making this one folks!

Plant Markers 2 size

Plant marker L.stl

Geometric Origami Pencil pot Pen holder with Drawer

Pen Holder or Plants Pot 120mm.stl

SD Card Case

dose_SD_v3-jar_SD_card_v3.stl

Outlet Cover Outdoor v1.step

This is designed to house a 110V indoor lightswitch.  I wanted to use this to turn my dust collection on and off inside the garage, so this is my first attempt at a weatherproof housing.  

I printed everything in ABS, except for the weather seal, which is TPU

RetroMaker Wedge House #1 Ornament

Check out the hanging ornament version to hang on your Christmas tree and decorate as you like for the holidays! 

Miniature wedge house for the neighborhood or garden, any crack will do.

Print on its long narrow side attached to the build plate. Recommend an 8mm brim and supports if needed. 

Creative Commons License BY-NC-ND 4.0

RetroMaker Wedge House #1

Miniature wedge house for the neighborhood or garden, any crack will do.

Print on its long narrow side attached to the build plate. Recommend an 8mm brim and supports if needed. 

Check out the hanging ornament version and decorate as you like for the holidays!

Creative Commons License BY-NC-ND 4.0


outdoor

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 78 new models

Awning Lantern Holder

Seed Splitter Spitter

Pistol Crossbow Bolts, 6.3 and 6.5 inch

Murder in the Dark Game Necklace Tokens

View 111 new models

View 16 new models

Planter “Sylvatica Tree”

Modern Vase

Planter castle

View 31 new models

Trampoline Water Sprayer #OutdoorThangs

Chest Hook for Sackpack

View 11 new models

Plant Markers 2 size

Geometric Origami Pencil pot Pen holder with Drawer

SD Card Case

View 14 new models

RetroMaker Wedge House #1 Ornament

RetroMaker Wedge House #1