The updated ITALIC V2 is an eccentric watering can featuring a playful skewed profile. The original ITALIC has been refined for improved functionality whilst maintaining the iconic shape.


**_Printing Guidelines_**

The walls of this container are 1.2 mm thick, and only the handle portion is solid. I suggest printing with a high wall count (5+) to ensure that the thin handle won't snap off.  You also need to ensure that your printer can create watertight models, otherwise this won't be quite as useful.

My settings:
- 0.16 mm layer height
-5 perimeters
- 20% Gyroid infill
- 10mm brim (or use the 'wBrim' version)

Download includes a 'wBrim' version with minimal supports since the handle is unsupported for much of the print, as well as a version of just the watering can. I managed printing the unsupported version with a 10mm brim, using ASA.


---

Photographed model was printed using [QIDI ASA Green](https://qidi3d.com/products/qidi-asa-filament?variant=41725687496844&sca_ref=6089281.BQS8d0sJuF) ([Amazon](https://amzn.to/3HK5pK6)) on the [Qidi Plus4 3D Printer](https://qidi3d.com/products/plus4-3d-printer?sca_ref=6089281.BQS8d0sJuF) (Also [on Amazon](https://amzn.to/4jON7VK)). 

ITALIC V2 Watering Can

ITALIC_V2_wBrim.stl

[_**V2 is now available HERE**_](https://than.gs/m/1377006?affiliateCode=MAKE)

ITALIC is an eccentric watering can featuring a playful skewed profile. The enclosed container is filled through an opening in the top of the handle, which can also be covered with your thumb while pouring to regulate flow. Like any good fancy designer product, it's slightly awkward to hold. How will you pick it up? :P

**_Printing Guidelines_**

The walls of this container are 1.2 mm thick, and only the handle portion is solid. I suggest printing with a high wall count (5+) to ensure that the thin handle won't snap off.  You also need to ensure that your printer can create watertight models, otherwise this won't be quite as useful. I used default print settings on my Bambu Lab X1-Carbon with ABS and it worked out!

Download includes a version with minimal supports since the handle is unsupported for much of the print, as well as a version of just the watering can. In either case, I would suggest a substantial brim to help with bed adhesion. 

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab Mint ABS](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


ITALIC (V1) Watering Can

ITALIC_can_supported.stl

**Added R2 model which includes new sword and insert. I increased the depth of the threads into the helm which adds significant strength. **

If the kids are playing in the pool or running around in the backyard, this pool noodle sword will elevate their sword game! These work with a small pool noodle with a 1” (25mm) hole. Designed to be printed helm down (sword) and threads up (insert) they easily thread together so you can get your battle time going! The pool noodle fits snugly onto the insert so it doesn’t come off during your duels! 

Printing Directions:
**Outer layers > 3
Infill > 50%**

These need strength. The connection between the helm and the insert is a breaking point if you go light on layers and infill. Also, try to keep the blade (noodle) to 12 – 16”. Longer blades add more stress when the kids actually hit something. 

Make sure to check out the other swords! 

Private Use Only.

Become a **Maker Member** for unlimited downloads or become a **MERCHANT MEMBER** for commercial use. 

Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!

Pool Noodle Sword - Double Bladed

Double Bladed.stl

Pool Noodle Throwing Star

If the kids are playing in the pool or running around in the backyard, this pool noodle throwing star will elevate their game! These work with a small pool noodle with a 1” (25mm) hole. Designed to be printed flat, the pool noodle fits snugly onto the insert so it doesn’t come off during your battle.

Printing Directions:
Outer layers > 3
Infill > 50%

Make sure to check out the other swords! 

Private Use Only.
Become a **Maker Member** for unlimited downloads or become a **MERCHANT MEMBER** for commercial use. 

Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!

Pool Noodle Throwing Star

Star.stl

Pool Noodle Sword - Viking Destroyer

**Added R2 model which includes new sword and insert. I increased the depth of the threads into the helm which adds significant strength. **

If the kids are playing in the pool or running around in the backyard, this pool noodle sword will elevate their sword game! These work with a small pool noodle with a 1” (25mm) hole. Designed to be printed helm down (sword) and threads up (insert) they easily thread together so you can get your battle time going! The pool noodle fits snugly onto the insert so it doesn’t come off during your duels! 

Printing Directions:
**Outer layers > 3
Infill > 50%**

These need strength. The connection between the helm and the insert is a breaking point if you go light on layers and infill. Also, try to keep the blade (noodle) to 12 – 16”. Longer blades add more stress when the kids actually hit something. 

Make sure to check out the other swords! 

**Private Use Only.
Become a Maker Member for unlimited downloads or become a MERCHANT MEMBER for commercial use. **

Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!

Pool Noodle Sword - Viking Destroyer

Viking Destroyer.stl

**Added R2 model which includes new sword and insert. I increased the depth of the threads into the helm which adds significant strength. **

If the kids are playing in the pool or running around in the backyard, this pool noodle sword will elevate their sword game! These work with a small pool noodle with a 1” (25mm) hole. Designed to be printed helm down (sword) and threads up (insert) they easily thread together so you can get your battle time going! The pool noodle fits snugly onto the insert so it doesn’t come off during your duels! 
Printing Directions:
**Outer layers > 3
Infill > 50%**
These need strength. The connection between the helm and the insert is a breaking point if you go light on layers and infill. Also, try to keep the blade (noodle) to 12 – 16”. Longer blades add more stress when the kids actually hit something. 
Make sure to check out the other swords and the SHIELD KIT! 
**Private Use Only.
Become a Maker Member for unlimited downloads or become a MERCHANT MEMBER for commercial use. **
Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!

outdoor

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

ITALIC V2 Watering Can

ITALIC (V1) Watering Can

Pool Noodle Sword - Double Bladed