Bullet Hole Vase (Small)

Vase 50x50.stl

Unicorn Horn Stash Container or LED glowing Unicorn Horn

Unicorn Horn v2.stl

D' Bomb Hanging IKEA light! Turn your room or space into the BOMB

whole bomb light.stl

Cracked Egg LED Cover

Cracked Egg - Egg.stl

MoccaMaster LED Cover

The clear plastic cover for the red status LED on our Technivorm MoccaMaster broke. I modeled and printed a replacement part in clear polycarbonate. It is odd shaped because it grips onto an LED that behind the cover is shaped like a small Christmas light. 

Includes Fusion360 file. (I originally made a shallower version which is shown upright on a green cutting mat.)

Infinity Mirror Stand (LED Light Up)

Show off your infinity Mirror in style!
This is a stand for an Infinity Mirror built with a 12x12" shadow box.  There are a ton of builds out there for Infinity Mirrors.  If you would like me to do one on how I made mine drop a request on the guestbook here https://withkoji.com/@MakersMashup/y82g

This uses silicone LED Neon strips (One on each side) and then hooks to a standard LED controller.  Here is one you can build yourself: https://thangs.com/designer/Makers%20Mashup/3d-model/ElectroCookie%20Enclosure%20for%20WLED%20Projects-760374?manualModelView=true&source=Recent


Was this model helpful for you? Consider supporting my work in any of the following ways!  Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or
consider supporting my ongoing work https://www.patreon.com/makersmashup
Purchase anything on amazon after visiting our store page https://amzn.to/429HusI  Just click this link first!

No cost option to support my work?

- Subscribe to the YT channel
- Follow me on Thangs.com
- Watch videos on the channel!
- Share any of the videos on social media!
- Share my models with friends and family!



Dual Colour Modular Mushroom Caps (Glow-in-the-Dark)

Cap Surface Gyroid.stl

HMG7 LED Curved 100mm Lightweight 4020 Ducts.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: [MediaMan3D@gmail.com](mailto:MediaMan3D@gmail.com)

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Swag Lamp

swag_lamp_frame.stl

Mini Swag Lamp

The Mini Swag Lamp can be printed and used with the hanging swag setup or without as a table top tealight holder.

The lamp is to be used with a small tealight LED candle only! do not expose model to heat or fire.

Files contained.
Frame
Gem
Skinny Gem
Votive Holder Straps
Votive Holder Base
Swag Chain 2 Lengths
Swag Chain Connector


WLED Plant Backlight - Indoor/Outdoor lighting for plants

You will need an LED strip and Controller for this model.  Check out https://thangs.com/mythangs/file/760374 for a full DIY LED Controller you can build.  

This holds the LED strips, wire up to a LED Controller with LEDS and place the post in the ground.  Pretty simple but it can create some really great visual effects in your home or garden.  Simple print. 

Was this model helpful for you? Consider supporting my work in any of the following ways!  Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or
consider supporting my ongoing work https://www.patreon.com/makersmashup
Purchase anything on amazon after visiting our store page https://amzn.to/429HusI  Just click this link first!

No cost option to support my work?

Subscribe to the YT channel
Follow me on Thangs.com
Watch videos on the channel!
Share any of the videos on social media!
Share my models with friends and family!



led

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Bullet Hole Vase (Small)

Unicorn Horn Stash Container or LED glowing Unicorn Horn

D' Bomb Hanging IKEA light! Turn your room or space into the BOMB

Cracked Egg LED Cover

MoccaMaster LED Cover

View 10 new models

Dual Colour Modular Mushroom Caps (Glow-in-the-Dark)

View 510 new models

Swag Lamp

Mini Swag Lamp

View 13 new models

Hex Lamp

Mosaic Lamp

Cathedral Lamp

Fish Scale Lamp

Arabesque Lamp

Star Diamond Lamp

Japanese Lantern

Diamonds in the Rough (large)

Diamonds in the Rough (medium)