Lego Pirates Lightbox

Lego Pirates Lightbox.3mf

Light Up Mini Sword (Uses Balloon Lights)

Sword Body.stl

RTKeliteStation.stl

Hey rock star you just found my best selling desk organizer!  I print these in PLA with zero supports and 15% infill.  There is a little bit of cleanup required in battery compartment and along the recessed dips for the light installation.  I used a 4 ounce glass jar to hold IPA, standard sized wax pucks and a 5" x 4" silicone wax pad.  It is up to you if you want to sell the organizers with these items included.  The light is important, (Link below) to install the light push the end through the battery compartment and pull the wire through the top hole.  Once you have a good amount of wire start shoving it into the recessed light track, starting at the center of the spiral and follow it along.  There will be extra wire that will stay in the battery compartment area.  When you buy the lights, remove the clip with a phillips screwdriver so it will fit in the compartment.   I use a blunt end of the screwdriver handle or other tools to shove the wire into the track throughout the model.  These trays look amazing in rainbow, glitter and glow filaments.

https://www.amazon.com/dp/B08L8ZL5K9?psc=1&ref=ppx_yo2ov_dt_b_product_details

COMMERCIAL LICENSE - With your active support to Rytek through this Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires. 

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 20%
Infill Pattern: Gyroid
Supports: NO (May want to try minimum ones in the battery compartment.
Brim: No
Raft: N0
Skirt: No


HMG7 Turbine Fan Guard.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: [MediaMan3D@gmail.com](mailto:MediaMan3D@gmail.com)

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Broken Brick – Miles Morales ( NO AMS )

Broken Brick – Miles Morales.3mf

Brocken brick zelda v2 light

Brocken brick zelda v2 light.3mf

Hex Modern Lamp

Lamp Top.stl

Wavy Panel Lamp

Panel.stl

Minimal Spiral Christmas Tree LED Candle Holder

TreeBowl1.stl

EXIT Lightbox 

Lightbox exit1.3mf

Lantern Desk Lamp - Bambu LED Light Kit 001

lantern-top.stl

MINI Hot Air Balloon (Bundle)

fd -  MINI-CLOUD BASE -v01.STL

Lego Classic Lightbox

Lego Classic Lightbox.3mf

Christmas led tree

christmas led tree.stl

WLED Plant Backlight - Indoor/Outdoor lighting for plants

You will need an LED strip and Controller for this model.  Check out https://thangs.com/mythangs/file/760374 for a full DIY LED Controller you can build.  

This holds the LED strips, wire up to a LED Controller with LEDS and place the post in the ground.  Pretty simple but it can create some really great visual effects in your home or garden.  Simple print. 

Was this model helpful for you? Consider supporting my work in any of the following ways!  Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or
consider supporting my ongoing work https://www.patreon.com/makersmashup
Purchase anything on amazon after visiting our store page https://amzn.to/429HusI  Just click this link first!

No cost option to support my work?

Subscribe to the YT channel
Follow me on Thangs.com
Watch videos on the channel!
Share any of the videos on social media!
Share my models with friends and family!



Thangs Valentine’s Day Contest. LED tealight shadow box

Heart box shadow cast.stl

LED Light Bar Mount For Round Rods

I decided I was tired of my CR-10 enclosure being dark all the time, so I rummaged up a 24V LED light bar and designed this mount for it.  

I have two different enclosures, with two different frame diameters, 16mm and 14.75mm.  I have included both versions in STL format and the STEP file for those wishing to modify the design for their own use.

I would suggest two of these mounts for each light bar.  The mounts incorporate a steel clip and fastener that is included with the light bar kit, and each mount uses one additional M3x25 SHCS and M3 nylon-insert locknut.

For a standard installation of one lightbar you would require the following:

Bill of Materials
- 12-24V LED Light Bar and Mounting Hardware (the mount was designed to fit one of the lights in this four pack: https://www.amazon.com/dp/B08T8VG75B or equivalent), Quantity 1
- M3x25 SHCS (McMaster 91292A020 (sold qty 100) or equivalent), Quantity 2
- M3 Nylon-Insert Locknut (McMaster 93625A100 (sold qty 100) or equivalent), Quantity 2
- LED Strip Mount, printed, Quantity 2

Refer to the attached images to determine the assembly methods.

I chose to design this part for resin printing, using a toughened resin.  As I printed these on an mSLA printer, I cannot speak to the veracity of this part for FDM printing.  

If one chose to use an FDM I would suggest orienting the rod axis parallel with the printer Z axis, and print with supports.

led

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Lego Pirates Lightbox

Light Up Mini Sword (Uses Balloon Lights)

RTKeliteStation.stl

HMG7 Turbine Fan Guard.stl

Broken Brick – Miles Morales ( NO AMS )

Brocken brick zelda v2 light

Hex Modern Lamp

Wavy Panel Lamp

Minimal Spiral Christmas Tree LED Candle Holder

EXIT Lightbox

Lantern Desk Lamp - Bambu LED Light Kit 001

MINI Hot Air Balloon (Bundle)

Lego Classic Lightbox

Christmas led tree

WLED Plant Backlight - Indoor/Outdoor lighting for plants

Thangs Valentine’s Day Contest. LED tealight shadow box

LED Light Bar Mount For Round Rods

Broken Brick – Toad Edition

Moduluma - Orbiflora Lampshade Add-On

Pumptopus 2 - Print in place - halloween - Jack O Lantern