tracking pixel
W C

LED Light Bar Mount For Round Rods

by

wpcarver1

Follow
Follow
Remix Model
Like
wpcarver1
wpcarver1
Image 1 of 3
LED Light Bar Mount For Round Rods 3d model
2D
3D
Makes
LED Light Bar Mount For Round Rods 3d model
LED Light Bar Mount For Round Rods 3d model
LED Light Bar Mount For Round Rods 3d model
4 Likes14 DownloadsDecember 30, 2022


I decided I was tired of my CR-10 enclosure being dark all the time, so I rummaged up a 24V LED light bar and designed this mount for it.

I have two different enclosures, with two different frame diameters, 16mm and 14.75mm. I have included both versions in STL format and the STEP file for those wishing to modify the design for their own use.

I would suggest two of these mounts for each light bar. The mounts incorporate a steel clip and fastener that is included with the light bar kit, and each mount uses one additional M3x25 SHCS and M3 nylon-insert locknut.

For a standard installation of one lightbar you would require the following:

Bill of Materials

  • 12-24V LED Light Bar and Mounting Hardware (the mount was designed to fit one of the lights in this four pack: https://www.amazon.com/dp/B08T8VG75B or equivalent), Quantity 1
  • M3x25 SHCS (McMaster 91292A020 (sold qty 100) or equivalent), Quantity 2
  • M3 Nylon-Insert Locknut (McMaster 93625A100 (sold qty 100) or equivalent), Quantity 2
  • LED Strip Mount, printed, Quantity 2

Refer to the attached images to determine the assembly methods.

I chose to design this part for resin printing, using a toughened resin. As I printed these on an mSLA printer, I cannot speak to the veracity of this part for FDM printing.

If one chose to use an FDM I would suggest orienting the rod axis parallel with the printer Z axis, and print with supports.


4 Likes14 DownloadsDecember 30, 2022





4 Likes14 DownloadsDecember 30, 2022