Spool Cord Storage

Handle-v20250813.stl

Fin Splash Waste Chute

Chute-2mm-v20250723.stl

Flexi Build Plate Holder

DF-Flexi-Holder-v20250703.stl

Deck Access Point Bracket

Deck-Access-Support-Bracket-v20240330.stl

Wyze Pan Cam Wall Mount

I remixed my Ender 5 Wyze Pan Cam front bar mount to be able to mount the camera on a wall instead. I have a Pan Cam v2, but I think this model should work with the Pan Cam v3 too.

Ender5 Pro/Plus Hotend Strain Relief Remix

Remixed Ender 5 (Pro, Plus) hotend strain relief for bowden tube and heater/thermistor wiring.

Ender 5 Pro Plus Hotend Strain Relief Simple

Bulbasaur Pumpkin Witch's Hat

Remixed a few Bulbasaur items for a bigger pumpkin with a witch's hat or pumpkin lid with one-piece peduncle. The pumpkin now has a peg to hold it in place.

Bulbasaur-Body.stl

Bulbasaur Santa Claus with Gift

A Christmas-themed holiday Bulbasaur remix with Santa Claus hat and present gift box for LED tealight holder.

Santa-Bulbasaur.stl

Year of Ox 2021 Lunar New Year

Added a 2021 stand base for the 3DWP Bull Ox for Lunar New Year.

Bull-Sculpture.stl

Owl with wall mount

Remix to include a wall mounting option from the back using a screw or nail. Increased model size to 150mm for longest axis.

Downspout Splash Boat

Deploy your boat to guard your downspout and direct water away from the foundation to your garden or yard. A familiar friend of 3D printers, this boat can help direct water away from the foundation of your home or building as it comes out the gutter downspouts. The boat deck is angled to expel water through the porthole openings in the bow. The model as designed is 254mm x 175mm x 119mm.

Pictured print of model was made with PLA at 0.28mm layer height with 20% infill.

This design was inspired by the 3DBenchy by CreativeTools, but this is an original design and not a remix.

Watch the boat in action with this YouTube video:  https://youtu.be/aL9a34dyeJc

American Bee House

American flag-inspired bee house designed to use replaceable cardboard tubes. For solitary bees, such as mason, orchard, leaf-cutter, or carpenter, etc. House can be mounted with a 2.5in or larger nail or screw. House has a sloped roof design that extends to overhang the tubes for rain protection. No supports needed if printed with back of house flat on print bed. Recommend 20% infill.

House was designed for bee cardboard insert tubes 135mm long and 8mm diameter. Up to 111 tubes can fit in the model. Space can be used in the ‘stripes’ of the model to fill with bee nest building material instead of tubes. Recommend the Rivajam cardboard replacement tubes, available direct or through Amazon. Important to get the replacement tubes, not the guard tubes (the guard tubes are larger). This model provides the guarding needed for the replacement tubes. I have no affiliation with Rivajam. Link to tubes: https://rivajam.com/product/rivajam-bee-nesting-paper-inserts-125-piece-pack-of-paper-inserts/

Recommend reading about managing a bee house to help care for bees all season long, such as tips from Michigan State University Extension: Building and Managing Bee Hotels for Wild Bees. I have no affiliation with Michigan State University. Link: https://pollinators.msu.edu/publications/building-and-managing-bee-hotels-for-wild-bees/

American-Bee-v20210416.stl

Trap Bait Holder for Live Animal Traps

Simple bait holder plate for live animal cage traps (like Havahart brand). I was using a simple plastic lid for bait, but squirrels figured out how to just steal the lid with the bait and not trigger the trap mechanism. This bait holder can be fixed to the cage with a zip-tie so it can't be stolen out of the cage.

Trap-Bait-Plate.stl

Gulfcoast Robotics LED Light Bar Ender5 Reverse Mounts

Reverse mounting brackets for Gulfcoast Robotics (GCR) LED light bar on the Ender 5/5-Pro/5-Plus front bar. I needed the power cable for the light bar to be on the right side of my Ender 5-Plus, so I remixed the Ender 5 mounting brackets from GCR to be able to invert the light bar itself for mounting. Requires two M5x8 screws and two M5 hex nuts in addition to the mounting bolts supplied with the light bar.

GCR LED light bar: https://gulfcoast-robotics.com/collections/products/products/24v-premium-led-light-bar-upgrade-creality-ender-3-3d-printer

GCR-LED-Bar-Bracket-R.stl

Ender 5 Wyze Cam Pan Front Bar

Ender 5/5-Pro/5-Plus front bar mount for the Wyze Cam Pan. I remixed the tilt block by EndesmRads into a mount for my Ender 5 Plus. I like using the cam pan to view my second printer without needing a second camera, and I can pan around the room too. The mounting holes use M5 screws. I used M5x16 with t-nuts and washers to secure it. Printing details are below. Design is for the cable to route on the right side, but you can easily mirror the STL in your slicer if you'd like a left side version.

Printed vertical (with the surface that mounts to the front bar flat to the buildplate).
Use tree supports for 75 degree overhang angles touching buildplate.
Wall line count 5.
0.2mm layer height.
50% infill.

Ender5-Wyze-Pan-Front-Bar.stl

Lava Lamp v2

Decorative lava lamp sculpture. Three parts: lava, lamp bottom, and lamp top. Easy to customize and mix color/material combinations.

Lamp-Lava-v2.stl

DNA with X-ray Diffraction Base

DNA double helix with a X-ray diffraction-inspired base in honor of Rosalind Franklin.

Rosalind Franklin's research as a chemist and X-ray crystallographer was central to understanding of the structure of DNA's double helix. The base of this model is a design inspired by the famous x-ray diffraction image of the DNA double helix. Rosalind Franklin wikipedia: https://en.wikipedia.org/wiki/Rosalind_Franklin DNA X-ray diffraction image: https://en.wikipedia.org/wiki/Photo_51

DNA-Xray-v2.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

drachenfire84

Achievements

Seedling

Fan Favorite