Truss Tree (Truncated Octahedron)

Truss Tree Truncated Octahedron.stl

Phone stand

model310.stl

Barbed Wire Heart Flower Holder

Barbed Wire Heart Flower Holder.stl

Celtic Chess Pieces

Celtic King.stl

Lattice Skull Square

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square:
Diamond:
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Spiralized Octet Truss Modular Snap Struts

Display Only.stl

Celtic Knot Gridfinity Bin 2x2 Extended

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard: https://social.thangs.com/m/733950 
Celtic Knot Gridfinity Bin 1x1 Extended: https://social.thangs.com/m/733951 
Celtic Knot Gridfinity Bin 1x2 Standard: https://social.thangs.com/m/733953 
Celtic Knot Gridfinity Bin 1x2 Extended: https://social.thangs.com/m/733956 
Celtic Knot Gridfinity Bin 2x2 Standard: https://social.thangs.com/m/733962 
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


Stackable Herb Dryer - Square Pattern

Square Pattern Display.stl

TPMS Tree (Diamond)

TPMS Tree (Diamond).stl

Lattice Benchy (Wicker Lattice)

The hull and walls of this Benchy are built with face-centered cubic lattice structure. Great to show off your resin printer, but not very seaworthy.

See here for video: https://youtu.be/GFnzZk8DGfQ 

See here for other Lattice Benchy designs:
Face-centered Cubic Lattice: https://than.gs/m/874758 
Wicker:


Seismic Vases - Square

Seismic Vase Large.stl

Eiffel Tower - 3D Model

Eiffel Tower.STL

Lattice Easter Egg 2024

Lattice Egg 2024 Top.stl

Lattice Skull Wire Tangle

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave: https://than.gs/m/948893 
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Truss Tree (Diamond)

Truss Tree Diamond.stl

Celtic Knot Gridfinity Bin 2x2 Standard

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard: https://social.thangs.com/m/733950 
Celtic Knot Gridfinity Bin 1x1 Extended: https://social.thangs.com/m/733951 
Celtic Knot Gridfinity Bin 1x2 Standard: https://social.thangs.com/m/733953 
Celtic Knot Gridfinity Bin 1x2 Extended: https://social.thangs.com/m/733956 
Celtic Knot Gridfinity Bin 2x2 Standard:
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


Truss Tree (Flourite)

Truss Tree Flourite.stl

Lattice Skull Wire Weave

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Lattice Vase

Lattice Vase

Print without supports

My vase is printed in Sovol Green Rainbow Silk PLA: https://amzn.to/48CnfYq

CERCA |  Modular Screen Table Lamp E14, E26, E27

CERCA_table-lamp-MeshPlate_long-small.stl

lattice

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Truss Tree (Truncated Octahedron)

Phone stand

Barbed Wire Heart Flower Holder

Celtic Chess Pieces

Lattice Skull Square

Spiralized Octet Truss Modular Snap Struts

Celtic Knot Gridfinity Bin 2x2 Extended

Stackable Herb Dryer - Square Pattern

TPMS Tree (Diamond)

Lattice Benchy (Wicker Lattice)

Seismic Vases - Square

Eiffel Tower - 3D Model

Lattice Easter Egg 2024

Lattice Skull Wire Tangle

Truss Tree (Diamond)

Celtic Knot Gridfinity Bin 2x2 Standard

Truss Tree (Flourite)

Lattice Skull Wire Weave

Lattice Vase

CERCA | Modular Screen Table Lamp E14, E26, E27