BEDLA table lamp

lampshade.STL

SP02L.stl

SP01L Lamp

SP01L.stl

Flome V1

flomev1.stl

Ajo negro | Vase

Vase model Ajo Negro.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING SETTINGS**
The model is created in such a way that no support is needed.

Use the solid model (ajonegro.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and black matte PLA)

ajonegro.stl

Materia negra | Vase

Vase model Materia negra.

Ideal for decoration, as well as being a useful vase to place flowers or anything you wish.

Inspired by a curious geometry that recalls the growth and transformation of black matter.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase this if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and matte black PLA)

Aletas | Vase

Vase model Aletas.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING SETTINGS**
The model is created in such a way that no support is needed.

Use the solid model (aletas.stl) by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

(Recommended layer height of about 0.2 mm and blue matte PLA)

Calabaza | Vase

Pumpkin vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and orange matte PLA)

Enredadera | Vase

Vase model Enredadera.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and green matte PLA)


Tetrabrik Vase

tetrabrik_open.stl

Elegant Easter Egg Wall Decor B (2 Files)

Easter egg decor 1.3mf

Flome V3

flomev3.stl

Flome V2

flomev2.stl

Cos | Planters

cos1.stl

Oso | Vase

oso.stl

Capullo | Vase

capullo.stl

Leña lamp

fillbase (1).stl

Llama lamp

llama.stl

Vortice | Vase

Vase model Vórtice.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (vortice.stl) modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and purple matte PLA)

Fumarola | Vase

Vase model Fumarola.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (fumarola.stl) by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and matte red PLA)

housedecor

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

BEDLA table lamp

SP02L.stl

SP01L Lamp

Flome V1

Ajo negro | Vase

Materia negra | Vase

Aletas | Vase

Calabaza | Vase

Enredadera | Vase

Tetrabrik Vase

Elegant Easter Egg Wall Decor B (2 Files)

Flome V3

Flome V2

Cos | Planters

Oso | Vase

Capullo | Vase

Leña lamp

Llama lamp

Vortice | Vase

Fumarola | Vase