BEDLA table lamp

lampshade.STL

Materia negra | Lamp

CUBE.stl

Flome V1

flomev1.stl

Cos | Planters

cos1.stl

Leña lamp

fillbase (1).stl

Crisalida | Lamp

OLAS.stl

Ajo negro | Vase

Vase model Ajo Negro.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING SETTINGS**
The model is created in such a way that no support is needed.

Use the solid model (ajonegro.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and black matte PLA)

ajonegro.stl

Capullo | Vase

capullo.stl

Enredadera | Vase

Vase model Enredadera.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and green matte PLA)


Llama lamp

llama.stl

Aletas | Vase

Vase model Aletas.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING SETTINGS**
The model is created in such a way that no support is needed.

Use the solid model (aletas.stl) by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

(Recommended layer height of about 0.2 mm and blue matte PLA)

Calabaza | Vase

Pumpkin vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and orange matte PLA)

Redvelvet | Vase

Red Velvet vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (redvelvet.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

(Recommended layer height of about 0.2 mm and red matte PLA)

Uvas | Vase

Vase model Uvas.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (uvas.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

(Recommended layer height of about 0.2 mm and purple matte PLA)

Flome V2

flomev2.stl

Raices | Vase

Vase model Raíces.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (raices.stl) modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and green matte PLA)

Flome V3

flomev3.stl

Oso | Vase

oso.stl

Tronco | Vase

Tronco vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (trunk.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and green matte PLA)

Girasol | Vase

Sunflower vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (girasol.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and orange matte PLA)

housedecor

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

BEDLA table lamp

Materia negra | Lamp

Flome V1

Cos | Planters

Leña lamp

Crisalida | Lamp

Ajo negro | Vase

Capullo | Vase

Enredadera | Vase

Llama lamp

Aletas | Vase

Calabaza | Vase

Redvelvet | Vase

Uvas | Vase

Flome V2

Raices | Vase

Flome V3

Oso | Vase

Tronco | Vase

Girasol | Vase