Picture Frame Hanging Hook

picture_hook_2.stl

OOKER  |  foldable table hook, print-in-place

OOKER_table-hook_V1.stl

Tough Little Hook // Peg Anything

I made stronger hooks that use two pegs to prevent rotation. At 100% infill these little suckers can hold a fair amount of weight!

Made for standard pegboard with 1/4" holes spaced 1" apart. Photographed model printed with [MatterHacker White PRO Series PLA](https://bit.ly/PRO-PLA)

Multiboard Pick Holder.stl

JD - Multibase Pick Holder.stl

Ikea Skadis Notebook Holder

Sketch_N_Design-IkeaSkadis_NotebookHolder.STL

EZPZ Pegboard Hook // 10mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Small Shelf Hook // Type1

EZPZShelfHook_Type1_Small_Hook.stl

Keychain Pistol Wall Holster — For Glock & Pistol Blasters

Pistol Keychain Wall Holster Plain.stl

EZPZ Pegboard Hook // 5mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 5mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Stable Plant Support Hooks

PH001.stl

Multiboard Tactical Flash Light Holder

MultiBoardMountFlashlightNoHook.stl

Crochet Hook

Hook Horror - Tabletop Miniature

Hook_Horror_02_32mm.stl

GAMER HEADSET HOOK HOLDER

GAMER HEADSET HOOK HOLDER FOR DESK STAND:

✅ Easy to install (use double-sided adhesive tape, not included).
✅ Store your headset elegantly on the wall or other smooth surface.
✅ Protect it from dirt, dust and clutter on a smooth base.
✅ Ideal material for printing: ABS or TPU (ABS is recommended as it is more resistant).
✅ In order for the backing to adhere well to the surface, it must be cleaned and dried where you want to stick it. After being glued, it should be left to stand for 3 minutes for a good adhesion of the product.

APPROX. DIMENSIONS:

✅ Length: 10 cm
✅ Width: 4.6 cm
✅ Height: 6.3 cm

TERMS OF USE:

FOR WEB & PRINT:

- Personal Use is OK.
- For Commercial / Promotional use is OK but you must include:

The link to my profile "piazzestudio" of Thangs on any product pages online.

- If you sell this product personally you must put also the credit of the creator.

Copyright remains with me.

❌Do not claim this work as your own.

My designs are ideals for gifts, home decoration, events plans, partys, weddings, etc.

I hope you enjoy my Work.

---------------------------------------------------------

CONDICIONES DE USO:

PARA WEB ó IMRIMIR:

- Para uso personal está bien.
- Para uso comercial / promocional está bien, pero debes incluir:

El enlace a mi perfil "piazzestudio" de Thangs en cualquier página de productos en línea.

- Si vendes este producto personalmente también debes indicar los créditos adecuados.

Los derechos de autor permanecen conmigo.

❌No reclames este trabajo como tuyo.

Mis diseños son ideales para regalos, decoración del hogar, planificación de eventos, fiestas, bodas, adornos, etc.

Espero que disfrutes de mi trabajo.

6mm Pegboard Cleat Hook

6mm Pegboad Cleat system 1 Pair Layed out.stl

Coathanger S-Hook

S_Hook_35mm.stl

Over Door Double Hook - Strong Door Hook

Door Hook.stl

Simple Carabiner Clips - Style them your way!

Carabiner 112.stl

EZPZ Pegboard Hook // 15mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 15mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Simple Coat/Towel Hook

Simple Hook_10mm_Hook.stl

hook

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Picture Frame Hanging Hook

OOKER | foldable table hook, print-in-place

Tough Little Hook // Peg Anything

Multiboard Pick Holder.stl

Ikea Skadis Notebook Holder

EZPZ Pegboard Hook // 10mm Hook

EZPZ Small Shelf Hook // Type1

Keychain Pistol Wall Holster — For Glock & Pistol Blasters

EZPZ Pegboard Hook // 5mm Hook

Stable Plant Support Hooks

Multiboard Tactical Flash Light Holder

Crochet Hook

Hook Horror - Tabletop Miniature

GAMER HEADSET HOOK HOLDER

6mm Pegboard Cleat Hook

Coathanger S-Hook

Over Door Double Hook - Strong Door Hook

Simple Carabiner Clips - Style them your way!

EZPZ Pegboard Hook // 15mm Reinforced Hook

Simple Coat/Towel Hook