John McClane Christmas Tree Decoration

This is a John McClane (Bruce Willis) from Die Hard Christmas Tree Decoration. 
Die Hard is an action movie from the 90's and is considered as a Christmas Movie, then what's better to have that iconical character in your Christmas Tree?

It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer with Cura Slicer:
0 to layer 13 (0 to 2.6mm) = Light Skin
14 to 17 (2.8 to 3.4mm) = Black
18 to 21 (3.6 to 4.2mm) = White
22 to 25 (4.4 to 5mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Bike Vase

BIKE VASE_CLAMP ON.stl

Christmas Light Clip

It's Christmas... and all your neighbours have super-fancy, perfectly mounted Christmas lights while yours look sad, saggy and like they were hung by drunk elf. Well, after definitely _not_ having this problem at home, I decided to design my own light clip that's way better than what they sell at the hardware store. After that, I printed it, put it in deep freeze for 24hrs and then took it out and smashed it with a hammer. It didn't break. So I printed 30 of them and put them on my house.

Subtle. Sexy. Indestructible. Just the way I like it.

**NOTES:**

Super-easy print. Best printed on its side. Use PETG, ABS or something that'll last outdoors. I printed with 100% infill, minimal fan speed for strong layer bonds and no supports.

Bold Santa Middle Finger 3D Print Holiday Gag Decor 3MF

lrgbedFINGERWREATH.stl

Jack Skellington Halloween Decor – 6 Spooky Variants

Jack_Skellington_faces.3mf

jet fan blade.stl

jet fan for RC motor diameter of the fan is 105mm mounting hole is 5mm make sure your motor can handle current .

CHRISTMAS TREE - PENDANT

Easy to print model for Christmas decoration!
Just put a little rope over and its done!



SPEED BOAT | Scalable

SpeedBoat.stl

Car with Christmas tree wallart

christmas_tree_car.stl

5 Kawaii Dumplings - Christmas Tree Ornaments

DimSum_A_Tree_Decor_Holoprops.stl

Adornos del Dia del Padre #PartyThangs

El Mejor Papa del Mundo 3.stl

ZigZag Christmas Ornament

##Not to Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

##About the Design
This is an elegant abstract sculpture masquerading as a Christmas ornament. It almost seems to change shape as you rotate it in different directions.

This ornament prints well with just a single perimeter. That makes it very light and lets the most light through is you use transparent/translucent filament. In fact, it positively glows. It also looks amazing printed with bichromatic or trichromatic filaments. 

The print shown in clear was printed with Matterhackers Transparent PLA. They were printed on an AnyCubic Mega S and sliced using Cura. I'll be adding pictures soon that show the ornament printed with Matterhackers Quantum Raspberry Gold and Translucent Blue printed on a Prusa MK3S+ sliced using PrusaSlicer.

##Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

##Print Time
About 5 hours

##Print Settings
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm.

*Infill*
Using PrusaSlicer, you won't need infill. Just set top and bottom to 1 layer and minimum shell thickness to 0.15 mm. That will keep the ornament light (about 13 grams) and will let the most light through if you use translucent/transparent PLA. 

If you use Cura, I would use support blockers set to 1-3 layers high to add infill just in those areas that are unsupported.

*Speed*
With PrusaSclier, I used the default speed settings for my printer and generic PLA. In cura, I used:
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel Speed: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees (Cura) and 67 (PrusaSlicer)

Bunny Paper Folding Craft

Bunny Paper.3mf

Easter Bunny Aiah

BunnyAiah.stl

4-Inch Drone Build (20 x 20 Stack)

Bottom (9 x 9 Motor mount).STL

Valentine's Day Springie 2024

Wing Right.stl

Angry Christmas Light Bulb

Angry Christmas Light Bulb.stl

Happy Halloween - ghost.stl

Happy Halloween Decoration 

It's a super-easy-to-print design that doesn't require any backing. Prints flat.

**Print settings** : 
- 10-15% infill
- no support
- PLA Black from Ariane Plast

All my designs are copyrighted, so you can't sell digital or print files of them. If you would like to sell prints of my designs you can take out a commercial license.

If you'd like to keep up to date with the release of all my creations, don't hesitate to join me on my various networks:

[Instagram](https://www.instagram.com/arthena_3d/)

[Facebook](https://www.facebook.com/Arthena3D/)

[Tiktok](https://www.tiktok.com/@arthena.3d)

Don't hesitate to tag me or DM me on all my networks if you post photos of my creations, I'd love to see and share them :)

Bat Skull - Low Poly

The Bat Skull in its minimalist low poly version is a mesmerizing fusion of darkness and geometry.

Sharp angles and haunting shadows bring an air of intrigue, while the simplicity of the design draws you in.

His spooky essence will add a touch of spine-chilling charm to your space.

It's the perfect blend of spooky and stylish, ready to cast its spell on anyone who gazes upon it! 🦇💀
⸻⸻⸻⸻⸻⸻⸻⸻

**_Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @randomizy.3d, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #randomizy when sharing your video)_**

⸻⸻⸻⸻⸻⸻⸻⸻

𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you like my work and would like to support me so that I can bring you new content, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please do consider joining my Membership here:_** https://than.gs/u/296962?plans=true

⸻⸻⸻⸻⸻⸻⸻⸻
**INSTAGRAM:** https://www.instagram.com/randomizy.3d/

**TWITTER:** https://twitter.com/Randomizy3D

**FACEBOOK:** https://www.facebook.com/randomizy.3D

**Check More Here:** https://linktr.ee/Randomizy

Bat Skull_Low Poly.stl

3 lane 350mm Straight Track.3mf

This is a 350mm long straight section of track compatible with Tamiya mini 4wd. you will need a 400mm x 400m printer for this file.

hobbies & leisure

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

John McClane Christmas Tree Decoration

Bike Vase

Christmas Light Clip

Bold Santa Middle Finger 3D Print Holiday Gag Decor 3MF

Jack Skellington Halloween Decor – 6 Spooky Variants

jet fan blade.stl

CHRISTMAS TREE - PENDANT

SPEED BOAT | Scalable

Car with Christmas tree wallart

5 Kawaii Dumplings - Christmas Tree Ornaments

Adornos del Dia del Padre #PartyThangs

ZigZag Christmas Ornament

Bunny Paper Folding Craft

Easter Bunny Aiah

4-Inch Drone Build (20 x 20 Stack)

Valentine's Day Springie 2024

Angry Christmas Light Bulb

Happy Halloween - ghost.stl

Bat Skull - Low Poly

3 lane 350mm Straight Track.3mf