Auxetic Cubes // 30mm 7x7

Auxetic Cubes 30mm 7x7.stl

Auxetic Cubes // 18mm 22x22 Stacked

Auxetic Cubes 18mm 3x3 stack.stl

Auxetic Cubes // 20mm 3x3 Stacked & Tapered

Auxetic Cubes 20mm 3x3 stack tapered.stl

Auxetic Cubes // 30mm 4x4

Auxetic Cubes 30mm 4x4.stl

Auxetic Cubes // 18mm 4x4 Stacked

Auxetic Cubes 18mm 4x4 stack.stl

Arcade Cabinet Piggy Bank

CoinBank v34.3mf

Auxetic Cubes // 18mm 3x3 Stacked

Auxetic Cubes // 18mm 4x4

Auxetic Cubes 18mm 4x4.stl

Auxetic Cubes // 20mm 3x3 rounded Fidget Toy

Auxetic Cubes 20mm 3x3 rounded.stl

SKEWBITS (v1) Puzzle Game for 3D Printing *OUTDATED*

Grid.stl

Coffin Shaped Box (Skull)

Coffin Shaped Box_Skull (for 2 colors).stl

Coffin Shaped Box (Cross)

Coffin Shaped Box_Cross (for 2 colors).stl

The "Emergency" Button!

Press.STL

Print in place handle with a hinge .stl

simple handle with a hinge. Print the whole thing then remove the brim and bend the handle a few times to loosen the hinge. It prints already assembled and is suprisingly smooth and sturdy. The rotational range is about 210 degrees. I added only a few supports for the elevated flat parts. Print at low infill with thicker walls depending on the expected load. The hinge is very strong and it hardly flexes when being twisted. for addidtional strength, two machine screws and nuts can be slid into the holes in the hinge. Tolerances in the hinge are pretty high so it should print well on most printers. It can be down-scaled within reason if needed.

I printed mine with black PLA at 50C Bed and 195C nozzle with 100% cooling to better handle the overhangs
the hinge is very squeaky but the noise gets reduced the more the hinge is used, a little bit of thick lubricant can be added to mitigate the issue

Magnetic Stopper for Cabinet Doors

I had some cabinet doors that wouldn't stay shut, so why not print some quick little magnetic stoppers and save a trip to the hardware store?

These work with [3mm x 6mm magnets](http://bit.ly/DiscMagnets). I printed the model using [Fillamentum 98A Flexfill](http://bit.ly/flexFill) (Pistachio) and also used some metal thumbtacks I had around, although you could simply use two of these stoppers back to back for twice the holding strength!

Glued with [E6000 adhesive](https://amzn.to/3snLNUE). I made a little video about it [on Youtube](https://www.youtube.com/watch?v=JtTyb5e-aKE).



Decorative box hinged

2020 Extrusion - Pivot/Hinge - Midspan

2020 Extrusion Pivot/Hinge - 90deg

2020 Extrusion Pivot/Hinge

Hanger Hook for Old Door Hinges

I decided that the door to my closet only got in the way, so I decided to take it off the hinges. I started hanging things on the hinge, but they would often fall off, so I designed a hanger hook that attaches to it instead. I use it to hang my robe.

settings
White PLA
100% infill


hinge

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 22 new models

Auxetic Cubes // 18mm 22x22 Stacked

Auxetic Cubes // 20mm 3x3 Stacked & Tapered

Auxetic Cubes // 30mm 4x4

Auxetic Cubes // 18mm 4x4 Stacked

Arcade Cabinet Piggy Bank

Auxetic Cubes // 18mm 3x3 Stacked

Auxetic Cubes // 18mm 4x4

View 10 new models

View 12 new models

Coffin Shaped Box (Skull)

Coffin Shaped Box (Cross)

The "Emergency" Button!

Print in place handle with a hinge .stl

View 66 new models

Decorative box hinged

2020 Extrusion - Pivot/Hinge - Midspan

2020 Extrusion Pivot/Hinge - 90deg

2020 Extrusion Pivot/Hinge

Hanger Hook for Old Door Hinges