Polypanels // Pegboard Mounts

pegboard-square.stl

Folding Table Hinge - V2

Folding Table Leg Bracket - v2b.step

Pop-up Question Block Switch Game Case

Base+Lid.stl

IKEA Stall shoe closet hinge

IKEA stall shoe closet hinge

Improved Hinged Voron V0.1 Top-hat with LED holders 

Polypanels // Decagon

decagon-open.stl

Polypanels // DISCO Square

disco-square.stl

Polypanels // Square Magnet Panel

square-6x3magnets.stl

CLAPPER BOARD (print in place)

clapper file.stl

Auxetic Cubes // 18mm 3x3 SuperRound Tapered

Auxetic Cubes 18mm 3x3 SuperRound Tapered.stl

Print in place handle with a hinge .stl

simple handle with a hinge. Print the whole thing then remove the brim and bend the handle a few times to loosen the hinge. It prints already assembled and is suprisingly smooth and sturdy. The rotational range is about 210 degrees. I added only a few supports for the elevated flat parts. Print at low infill with thicker walls depending on the expected load. The hinge is very strong and it hardly flexes when being twisted. for addidtional strength, two machine screws and nuts can be slid into the holes in the hinge. Tolerances in the hinge are pretty high so it should print well on most printers. It can be down-scaled within reason if needed.

I printed mine with black PLA at 50C Bed and 195C nozzle with 100% cooling to better handle the overhangs
the hinge is very squeaky but the noise gets reduced the more the hinge is used, a little bit of thick lubricant can be added to mitigate the issue

PRINT IN PLACE BOXES / MULTIPURPOSE ORGANIZER BOXES / MODERN HOMEDECOR / OFFICE ESSENTIALS

3X2 - PRINT IN PLACE BOX (GRIDFINITY).stl

Wireframe Wastebin // Standalone Trashcan

Lid_Locking.stl

Seashell Shaped Box (Magnets)

Seashell Shaped Box (Magnets).stl

Coffin Shaped Box (Skull)

Coffin Shaped Box_Skull (for 2 colors).stl

IKEA VAPPEBY to Fleximount Monitor Mount Adaptor

VAPPEBY_fleximount.stl

Miniature Book Box [Draft]

bookbox_05.stl

Heart Shaped Box (Snap)

Heart Shaped Box (Snap).stl

Coffin Shaped Box (Cross)

Coffin Shaped Box_Cross (for 2 colors).stl

Hanger Hook for Old Door Hinges

I decided that the door to my closet only got in the way, so I decided to take it off the hinges. I started hanging things on the hinge, but they would often fall off, so I designed a hanger hook that attaches to it instead. I use it to hang my robe.

settings
White PLA
100% infill


hinge

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Polypanels // Pegboard Mounts

Folding Table Hinge - V2

Pop-up Question Block Switch Game Case

IKEA Stall shoe closet hinge

Improved Hinged Voron V0.1 Top-hat with LED holders

Polypanels // Decagon

Polypanels // DISCO Square

Polypanels // Square Magnet Panel

CLAPPER BOARD (print in place)

Auxetic Cubes // 18mm 3x3 SuperRound Tapered

Print in place handle with a hinge .stl

PRINT IN PLACE BOXES / MULTIPURPOSE ORGANIZER BOXES / MODERN HOMEDECOR / OFFICE ESSENTIALS

Wireframe Wastebin // Standalone Trashcan

Seashell Shaped Box (Magnets)

Coffin Shaped Box (Skull)

IKEA VAPPEBY to Fleximount Monitor Mount Adaptor

Miniature Book Box [Draft]

Heart Shaped Box (Snap)

Coffin Shaped Box (Cross)

Hanger Hook for Old Door Hinges