MALLA | woven fruit bowl

MALLA_fruit-bowl_V1_bowl-oval.stl

Seed starting system - 5x5 pots with lid (250mm bed)

Skylake5x5Planter-3.3mf

The "Bloom" Petal Fruit Bowl

Banana Bowl2.stl

 The Jute Knot Vessel

Big-size-bowl.stl

Strawberry Keychain Pill Container

Bottom Large.stl

VENOM BOWL / SMYBIOTIC STRUCTURE / DESIGNER DECOR / FRUIT BOWL

VENOM BOWL.stl

Cute Clicker Animal Crossing Collection pt. 2 | No AMS | Print-in-place | Support-free

Turnip (with Keychain version).3mf

Cute Clicker Fruits Collection | No AMS | Print-in-place | Support-free

Apple (with Keychain version).3mf

Pumpkin bowls

03_Bottom.stl

Happy Pumpkin

Body.stl

Banana bowl

Bananabowl.3mf

Pineapple coasters

All.3mf

Coconut bowls

Bottom_shell.stl

Sippy Collection, soda/beer can caps.

Citrus.stl

Fruit bowl “Sun”

base.stl

Bowl “Reniformis Coral”

**A coral inspired bowl for whatever is just flying around and needs a proper storage location.**
Species: turbinaria reniformis

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 218 x 215 x 86 mm
- Smaller (80%): 174 x 172 x 69 mm
- Small (60%):  131 x 129 x 52 mm
- I would not scale it down below 40%


Citrus juicer “Boaty”

**A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without.**
The spouts serve as a handle during the pressing process. Great for Oranges, Lemons, and Limes. The juicer is easy to clean, simply hold under running water.

Size:  130 x 164 x 64mm
This is the V3
Don't forget to post your makes!

**Print settings**
Required build volume: 130 x 164 x 64mm
Material usage: 60g
Print time: 6h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0.28mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none

Check your Filaments if they are food save to print this product. If not, there are many companies that offer cheap and certified food save filament. E.g. Extrudr, Fillamentum, Filaments.ca, Makerbot. The cheapest one I found is the Extrudr NX1 or NX2 (matt) for 23,60 € / 1000g.

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

True fruits watering can

**A watering can attachment for a True Fruits bottle.**
The top can be filled up without having to unscrew it. I had problems with watering cans that are too big for the sink and this one can be kept horizontal and therefore is easier to fill.

Size: 60 x 60 x 120 mm
This is the V2

**Print settings**
Required build volume: 60 x 60 x 120 mm
Material usage: 45g
Print time: 4h-5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: a brim if you have bad bed adhesion

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

bowl "heliopora coral"

**A coral inspired bowl for whatever is just flying around and needs a proper storage location.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 200 x 200 x38 mm
- Smaller (80%): 160 x 160 x 30mm
- Small (60%):  120 x 120 x 23 mm
- I would not scale it down below 40%

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 200g
Print time: (100% scale): 17h

Material usage (80% scale):120g
Print time: (80% scale): 11h

Material usage (60% scale): 60g
Print time: (60% scale): 5h

Material: PLA
Print direction: stl is rotated correctly
Support: none
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

bowl_heliopra.stl

Small Bowl

**A small organic bowl for whatever is just flying around and needs a proper storage location.**

Size: 210 x 210 x 30 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 220 x 220 x 40 mm
Material usage: 140g
Print time: 13h

Material: PLA
Print direction: stl is rotated correctly
Support: none
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

fruits

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

MALLA | woven fruit bowl

Seed starting system - 5x5 pots with lid (250mm bed)

The "Bloom" Petal Fruit Bowl

The Jute Knot Vessel

Strawberry Keychain Pill Container

VENOM BOWL / SMYBIOTIC STRUCTURE / DESIGNER DECOR / FRUIT BOWL

Cute Clicker Animal Crossing Collection pt. 2 | No AMS | Print-in-place | Support-free

Cute Clicker Fruits Collection | No AMS | Print-in-place | Support-free

Pumpkin bowls

Happy Pumpkin

Banana bowl

Pineapple coasters

Coconut bowls

Sippy Collection, soda/beer can caps.

Fruit bowl “Sun”

Bowl “Reniformis Coral”

Citrus juicer “Boaty”

True fruits watering can

bowl "heliopora coral"

Small Bowl