Pumpkin bowls

03_Bottom.stl

Fruit bowl “Sun”

base.stl

Banana bowl

Bananabowl.3mf

True fruits watering can

**A watering can attachment for a True Fruits bottle.**
The top can be filled up without having to unscrew it. I had problems with watering cans that are too big for the sink and this one can be kept horizontal and therefore is easier to fill.

Size: 60 x 60 x 120 mm
This is the V2

**Print settings**
Required build volume: 60 x 60 x 120 mm
Material usage: 45g
Print time: 4h-5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: a brim if you have bad bed adhesion

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

Citrus juicer “Boaty”

**A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without.**
The spouts serve as a handle during the pressing process. Great for Oranges, Lemons, and Limes. The juicer is easy to clean, simply hold under running water.

Size:  130 x 164 x 64mm
This is the V3
Don't forget to post your makes!

**Print settings**
Required build volume: 130 x 164 x 64mm
Material usage: 60g
Print time: 6h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0.28mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none

Check your Filaments if they are food save to print this product. If not, there are many companies that offer cheap and certified food save filament. E.g. Extrudr, Fillamentum, Filaments.ca, Makerbot. The cheapest one I found is the Extrudr NX1 or NX2 (matt) for 23,60 € / 1000g.

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

Small Bowl

**A small organic bowl for whatever is just flying around and needs a proper storage location.**

Size: 210 x 210 x 30 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 220 x 220 x 40 mm
Material usage: 140g
Print time: 13h

Material: PLA
Print direction: stl is rotated correctly
Support: none
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Coconut bowls

Bottom_shell.stl

True fruits piggy bank

**A cute piggy bank attachment for a True Fruits bottle.**
Stop having coins lying around. Save your spare cash in a fashionable way.
Screw the printed thing onto an empty, big true fruits bottle – done.
The coin slot size is 4mm x 40mm – fits Euro, Dollar, Pound and many more.

Don't forget to post your makes!

**Print settings**
Required build volume: 80 x 80 x 80 mm
Material usage: 40g
Print time: 4h

Material: PLA
Print direction: stl is rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none, a brim if you have bad bed adhesion
If you experience any problems, please feel free to contact me on twitter or Instagram

Pineapple coasters

All.3mf

Fruit bowl “Fire”

**A unique fruit bowl made from 3d printed parts and commercially usual wooden skewers.** It is easy to print and assemble. The bowl stands very stable due to the flexibility of the skewers.

**Instructions**
- Print the thing
- Buy a pack of wooden skewers –26 are required (you can get them for a dollar in most super markets or online) Size: 200mm x 3mm
- Place the skewers with the pointy side in the thing
- Enjoy!

Size assembled: 210 x 210 x 190 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 220 x 220 x 70 mm
Material usage:120g
Print time: 14h

Material: PLA
Print direction: stl is rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Bowl “Reniformis Coral”

**A coral inspired bowl for whatever is just flying around and needs a proper storage location.**
Species: turbinaria reniformis

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 218 x 215 x 86 mm
- Smaller (80%): 174 x 172 x 69 mm
- Small (60%):  131 x 129 x 52 mm
- I would not scale it down below 40%


Fruit bowl “Sand”

Fruit_bowl_sand_V2_2.2.stl

Sippy Collection, soda/beer can caps.

Citrus.stl

bowl "heliopora coral"

**A coral inspired bowl for whatever is just flying around and needs a proper storage location.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 200 x 200 x38 mm
- Smaller (80%): 160 x 160 x 30mm
- Small (60%):  120 x 120 x 23 mm
- I would not scale it down below 40%

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 200g
Print time: (100% scale): 17h

Material usage (80% scale):120g
Print time: (80% scale): 11h

Material usage (60% scale): 60g
Print time: (60% scale): 5h

Material: PLA
Print direction: stl is rotated correctly
Support: none
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

fruits

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Pumpkin bowls

Fruit bowl “Sun”

Banana bowl

True fruits watering can

Citrus juicer “Boaty”

Small Bowl

Coconut bowls

True fruits piggy bank

Pineapple coasters

Fruit bowl “Fire”

Bowl “Reniformis Coral”

Fruit bowl “Sand”

Sippy Collection, soda/beer can caps.

bowl "heliopora coral"

Pumpkin A (2 sizes)

Strawberry Keychain Pill Container

Fruit bowl “Wind”

Tippi Tree Cubish Ornament

Third place Squash

VENOM BOWL / SMYBIOTIC STRUCTURE / DESIGNER DECOR / FRUIT BOWL