N Scale Flare Stack

N Scale Flare Stack.stl

N Scale Flare Stack - Tan Fine Detail Plastic

LPE25 Clampless Quick Connect

LPE25-H03 Clampless Quick Connect.stl

Exhaust Header for Bambu Lab H2 Series Printers

VHF s25 H2D 1v00b header.stl

1UZFE Exhaust Flange

1UZ Exh Flange.stl

4" Exhaust Connector with 3" Inlet

ExhaustPipeThing.stl

3" Exhaust Adapter for Porter Cable Jointer

JointerExhaustAdapter.stl

Kings 85L Upright Fridge Fan Mount

Fan Mod Mount.stl

1/48 MC.202 exhaust stacks for Hasegawa

MC.202 exhaust stl.stl

Buick Nailhead Header Pack 1

BuickShortShotgunPackV1_SW2025.stl

Y-Block Injector Combo 1

YblkRibLakesInj_KitV3.stl

Double Flap (Walled) Exterior and Thru Wall Venting System

LPE25-EX4 1v00c.stl

LPE Exhaust Quick Release and Mounting System

LPE25-C91 Head Cap 1v00.stl

2.5 inch to 4 inch Exhaust Adapter

LPE25-LPE40, Adapter.stl

Window Hose Exhaust Adapter for xTool F1

XtoolF1HoseExhaustAdapter.stl

100mm Elbow Fitting for 4 in. Flexible Duct

I printed this elbow fitting to improve the connection for my dryer's ventilation. I printed it in [Fillamentum ASA](https://bit.ly/FL-ASA)([Also on MatterHackers](https://bit.ly/MH-asa)) and it has held up great for about a year so far!

Print solid with many shells. It can technically print without supports but I used a tiny bit at at the center of the elbow for a cleaner print.

6in to dual 4in coupler

6in to dual 4in coupler v2.stl

Bambu X1C Vent Adapter

I wanted to vent the exhaust from my Bambu Labs X1C through a filter then outside. The original model would not work without modification. The other remixes were close, but not quite what I was looking for. 

Print times are roughly 3hr on normal, and 1.5hr on ludicrous.

exhaust

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

N Scale Flare Stack

LPE25 Clampless Quick Connect

Exhaust Header for Bambu Lab H2 Series Printers

1UZFE Exhaust Flange

4" Exhaust Connector with 3" Inlet

3" Exhaust Adapter for Porter Cable Jointer

Kings 85L Upright Fridge Fan Mount

1/48 MC.202 exhaust stacks for Hasegawa

Buick Nailhead Header Pack 1

Y-Block Injector Combo 1

Double Flap (Walled) Exterior and Thru Wall Venting System

LPE Exhaust Quick Release and Mounting System

2.5 inch to 4 inch Exhaust Adapter

Window Hose Exhaust Adapter for xTool F1

100mm Elbow Fitting for 4 in. Flexible Duct

6in to dual 4in coupler

Bambu X1C Vent Adapter

Creality K1 MAX exhaust with clip mount

Dual 120mm mounted fans to 4 inch female air duct hose adapter

Mobile Air Conditioner Exhaust Duct Adapter