Finial Noise Ornament 1

Finial Noise Ornament 1.stl

Fount - incense holder

fount - incense holder

TPMS Tree (Fischer Koch S)

TPMS Tree (Fischer Koch S).stl

TPMS Tree (Diamond)

TPMS Tree (Diamond).stl

TPMS Tree (Gyroid)

TPMS Tree (Gyroid).stl

Star Christmas Tree Ornament

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**WHAT IS IT?**
This is a fun Christmas tree ornament that would also make a fun suncatcher if it's printed with transparent filament. It's reminiscent of a cross, a star (it actually has 8 points), classical western architecture, and more. Using my settings, it's a nice weight at 100% and extremely light at 75% and smaller.

**EASY PRINT**
If you use my settings, you shouldn't have any problems getting this to print. If you print this with your printer's default settings, you'll get a paperweight with a mushy top.

**RESIZING**
At 100%, the ornament is a nice size for larger trees – especially for the base of the tree where you'd expect larger ornaments. However, you can scale this down to 50% and still get nice prints. At that size, the ornament looks good on miniature trees. I haven't tried printing it larger than 100%.

**PRINT TIME**
With my settings, it will take about 4.5 hours to print at 100% scale. At 50%, it takes a little over an hour.

**COLOR-CHANGE PLA**
I used TTYT3D's quick color change PLA. If you print one ornament with it at 100% with it, you'll get a subtle color change. For a more dramatic change, like in the size comparison photo, print several ornaments at once. To go all the way from gold to blue, you'll need the estimated print weight to be at least 75 grams (4 ornaments at 100%).

**HOW DO YOU HANG IT?**
I've concealed attachment points one the back of one of the points of the star. Just tie a piece of coat thread to them to create a loop.

**PRINT SETTINGS**
You'll generally want to print this at the lower end of your PLA's temperature range. I print TTYT3D PLA at 180 degrees, which is well below their recommended temperature. Maybe my printer just runs hot, but that temp prints more accurately with less stringing.

*Thickness*

* Layer thickness: .15mm
* Wall thickness: 0.4mm and choose the “alternate extra wall” option so it alternates between 0.4 and 0.8mm walls with each layer (if you're using Cura – other slicers may not have this option). The alternate extra wall seems to prevent gaps in the print while minimizing the overall weight of the ornament. If you print below 75% scale, I suggest printing at 0.4mm without the alternate extra wall. I would also print without the alternate extra layer if you're using transparent filament.
* Top/bottom thickness: 2 layers for opaque filament, 1 for transparent filament
* Initial bottom thickness: 3 layers

*Infill*
This doesn't need any infill. Seriously.

*Speed*
You'll want to use slow printer settings to that the print is accurate and to reduce the pull on the thin arms of the topper.

* Overall: 60mm/s
* Outer wall: 40mm/s
* Inner wall: 50mm/s
* Travel Speed: 100mm/sec

*Build Plate Adhesion*
I printed with just a skirt and it worked well every time. If you have difficulty getting the details of the first layer to adhere to your bed, try adding a raft.

*Supports*
I added supports to get the outer points of the ornament to print better, but you can do without them. The supports I added made little difference in print time or the amount of filament used. I found that adding supports on the side with the attachment points (for strings) was problematic (attachment points broke before supports separated) and unnecessary (model printed fine without the supports). So, I added a support blocker to that corner. Support settings:

* Placement: touching Buildplate
* Overhang: 69 degrees
* Pattern: Lines
* Density: 12%
* Enable Support Brim: Yes
* Brim Width: 4mm

*Common Problems*
* Uneven print: Reduce print speed or try scaling the print up in the Z dimension only. Scaling disproportionately may impact how the ornament hangs.
* Mushy print: Reduce print temp, increase cooling, or print more than one ornament at a time. 

FIFA World Cup Qatar 2022 In Progress Plate

This is a decoration plate with the FIFA WORLD CUP Qatar 2022 Logo and two football players silhouette.
It's a simple design with the logo centered in the middle of the plate and the word "FIFA WORLD CUP Qatar 2022 In Progress Do Not Disturb".

It's designed to print with a filament color change. If you print it at 0.2mm height you must change color at layer 25. I recommend using red color as the base and withe for the text but you can use whatever you want.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at @Frikarte3D

Stocking

A Stocking to hang on the tree or anywhere else

Onca Voronoi - Jaguar Lince for decoration

Owl Vase for decoration - Planter

Simple Elephant Vase for decoration - Planter

DeerDeco (no supports)

PS Logo

Snowman Decoration

JigglyPuff Decoration

A Jigglypuff to hang anywhere. Needs supports

Drunk-O'-Lantern

A jack-o'-lantern with a funny face.  This model was printed on a Sunlu S8 at 30mm/s, 5% infill with a .2mm layer height.  I used the custom supports, (arch-buttress) in Cura to place under the two higher teeth.  You can find the custom supports plugin in the Marketplace in Cura which will be the Custom Supports Cylinder plugin.  

Glowing Spider

Cute spider
GLOWING!
There is a hollow place for an LED Tea Light.

This is a remix of:
https://www.printables.com/model/299185-win-an-obxidian-nozzle-e3ds-halloween-competition
 Changes:
 - Enlarged
 - Hollowed out
 - Hole for Tea Light

Hippo

Turret

twisted ballontank

decoration,

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Finial Noise Ornament 1

View 14 new models

TPMS Tree (Fischer Koch S)

TPMS Tree (Diamond)

TPMS Tree (Gyroid)

Star Christmas Tree Ornament

FIFA World Cup Qatar 2022 In Progress Plate

Stocking

Onca Voronoi - Jaguar Lince for decoration

Owl Vase for decoration - Planter

Simple Elephant Vase for decoration - Planter

DeerDeco (no supports)

PS Logo

Snowman Decoration

JigglyPuff Decoration

Drunk-O'-Lantern

Glowing Spider

View 19 new models

View 10 new models

twisted ballontank