Dinosaur Icon 0047, nestable box (v2)

3d-printer tom v1.3mf

Cable Holders

cable holder 6 mm.stl

SpinCycle : Keep every spool dry, For Bambu X1 /P1P AMS and Print-from dryboxes  #ThangsBambuContest

SpinCycle_DefaultJar.stl

Xbox Controller Paddle Hanger

This is small on purpose.

After fighting with the kids about where the paddles kept going off my Xbox controller, I made this littlel box for them.  It's small enough that I actually stuck it to the frame of the TV.

Now I am not looking everywhere for them.

I made to work with one of those 3M removable adhesive strips.

Remix of MacBook Pro 85w Magsafe 2 Charger Mount

I wanted to get my MacBook Pro 2015 off of the ground and also needed a way to organize the charger better. I created these mount to better hold and organize my charger. I attached this to my end table with a command strip on the back.

This were designed in Fusion 360. I have attached the parametric file in case someone needs to add screw holes or adjust for chargers. Feel free to remix!

MacBook Pro 85w Magsafe 2 Charger Mount

ZigZag Christmas Ornament

##Not to Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

##About the Design
This is an elegant abstract sculpture masquerading as a Christmas ornament. It almost seems to change shape as you rotate it in different directions.

This ornament prints well with just a single perimeter. That makes it very light and lets the most light through is you use transparent/translucent filament. In fact, it positively glows. It also looks amazing printed with bichromatic or trichromatic filaments. 

The print shown in clear was printed with Matterhackers Transparent PLA. They were printed on an AnyCubic Mega S and sliced using Cura. I'll be adding pictures soon that show the ornament printed with Matterhackers Quantum Raspberry Gold and Translucent Blue printed on a Prusa MK3S+ sliced using PrusaSlicer.

##Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

##Print Time
About 5 hours

##Print Settings
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm.

*Infill*
Using PrusaSlicer, you won't need infill. Just set top and bottom to 1 layer and minimum shell thickness to 0.15 mm. That will keep the ornament light (about 13 grams) and will let the most light through if you use translucent/transparent PLA. 

If you use Cura, I would use support blockers set to 1-3 layers high to add infill just in those areas that are unsupported.

*Speed*
With PrusaSclier, I used the default speed settings for my printer and generic PLA. In cura, I used:
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel Speed: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees (Cura) and 67 (PrusaSlicer)

MacBook Pro (2015) Vertical Mount 

mac mount.stl

Sony Walkman WM-FX290W battery door.stl

Just a quick print to fix one of the most classic problems with this device.  You probably wont need supports.  I printed this at a resolution of .28 with PETG and it came out functional.  Good luck.

Keyboard Switch Tester Plates (STL)

1 Key Switch Tester Plate v1.stl

Keyboard Switch Tester Plates (STEP)

1 Key Switch Tester Plate.step

Gridfinity: Ricoh DB-110 Battery Holder for GR3(x)

Ricoh DB-110 Battery Holder for Ricoh GR3 and GR3x for [Gridfinity](https://gridfinity.xyz) system.

[See Description] Under Desk Magic Keyboard & Trackpad Mount Mk-I

magic underdesk rail right.stl

3D Printable Extruded Layer Pot with embellished 3D printing layers

Fluffy Hearts LESS-THAN SIGN, nestable box (v3)

Through-hole simple UFO pencil topper

Case - Fuente de Voltaje (PowerSupply)

HP LaserJet 100 color MFP M175 back door lock bracket

One time I open the back door and this part fell out. Then I lost the part.
Without this part, the back door can not close properly, and it will not print because it thinks the door is open.
Thankfully I have another identical printer, and I made a model of the bracket (for the left side). The printer works just fine now with this replacement part.

German Shepard Bic Buddy

computers & electronics

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 193 new models

3d-printer tom v1.3mf

Cable Holders

SpinCycle : Keep every spool dry, For Bambu X1 /P1P AMS and Print-from dryboxes #ThangsBambuContest

Xbox Controller Paddle Hanger

Remix of MacBook Pro 85w Magsafe 2 Charger Mount

ZigZag Christmas Ornament

MacBook Pro 85w Magsafe 2 Charger Mount

MacBook Pro (2015) Vertical Mount

Sony Walkman WM-FX290W battery door.stl

Keyboard Switch Tester Plates (STL)

Keyboard Switch Tester Plates (STEP)

Gridfinity: Ricoh DB-110 Battery Holder for GR3(x)

[See Description] Under Desk Magic Keyboard & Trackpad Mount Mk-I

3D Printable Extruded Layer Pot with embellished 3D printing layers

View 468 new models

View 19 new models

Case - Fuente de Voltaje (PowerSupply)

HP LaserJet 100 color MFP M175 back door lock bracket

View 30 new models