DDR4 Ram Trays

Tray - Dimm.stl

Zalman-CNPS17X-pin.stp

NAS CASE 6-bay (+3 SSD) incl. STEP files.

preview_only_full_internal_chassis_v13.stl

MCU Guard! The rapid enclosure for microcontrollers!

MCU Guard - ESP32 - Dev V1.stl

Minimalistic ITX PC case for onboard graphics

round_apu_external_cover_v12.stl

Fanless Mini PC stand

Bought this fanless mini PC from AliExpress to replace my existing old PC turned pfsense box because of the lower power consumption. (Electricity cost is increasing, I anticipate I will get back the cost of this in electricity cost savings in 2 to 3 years.)

Designed with minimal contact with the box to increase the available surface area for natural convection. The device footprint is 135x125mm with a radius of 5 to 6mm at all corners, if anyone is thinking of using it for other devices.

Runs 1 to 3 degrees Celcius cooler after having it raised. I am also deciding if I should have it stand vertically instead. So far letting it stand vertically has not seen a noticeable difference for me.

*****
Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s 

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link:
Fanless Mini PC (Topton)
https://s.click.aliexpress.com/e/_DcRr0c7

*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j 

For Amazon affiliate links
https://wp.me/peMLu6-2C 

Intel CPU case LGA 1700

CPU Case Bottom.stl

ATX motherboard test stand

Drive an M3 screw through the center hole to use it to locate the motherboard in position. It is possible to put the rest of the screws in but I don't plan to use them, my objective is to prevent the stand from slipping away accidentally while doing testing/troubleshooting.

I might expand on this to use threaded inserts instead and attachments to hold PSU, HDD, or support heavy PCIE components like GPU.

*****
Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link:
https://s.click.aliexpress.com/e/_DeAZr9P

*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j

For Amazon affiliate links
https://wp.me/peMLu6-2C

AM3+ to AM4 Stock Cooler Adapter Retention Bracket

retention_bracket.stl

Intel CPU Stand LGA 77x 115x 1200 1366 2011

Intel_CPU_stand_socket_77x_115x_1200.SLDPRT

HDD bay for CoolerMaster NR400

Holds 6 3.5" drives with 2 mounting holes on either side. Uses the 140mm fan mount locations at the front of the case. Highly recommend printing in PETG due to ambient temps inside a case. Print top down with no supports, brim recommended to prevent curling/lifting on the backplate tab.

computer components

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

DDR4 Ram Trays

Zalman-CNPS17X-pin.stp

NAS CASE 6-bay (+3 SSD) incl. STEP files.

MCU Guard! The rapid enclosure for microcontrollers!

Minimalistic ITX PC case for onboard graphics

Fanless Mini PC stand

Intel CPU case LGA 1700

ATX motherboard test stand

AM3+ to AM4 Stock Cooler Adapter Retention Bracket

Intel CPU Stand LGA 77x 115x 1200 1366 2011

HDD bay for CoolerMaster NR400

NZXT GPU Backplate to match the NZXT G12

Modular case: motherboard (Parts #1-9)

Parametric Intel XF SR PCIe Bracket

Nzxt g12 led bracket.stl

Ripjaws V5 RAM cover