MCU Guard! The rapid enclosure for microcontrollers!

MCU Guard - ESP32 - Dev V1.stl

Fanless Mini PC stand

Bought this fanless mini PC from AliExpress to replace my existing old PC turned pfsense box because of the lower power consumption. (Electricity cost is increasing, I anticipate I will get back the cost of this in electricity cost savings in 2 to 3 years.)

Designed with minimal contact with the box to increase the available surface area for natural convection. The device footprint is 135x125mm with a radius of 5 to 6mm at all corners, if anyone is thinking of using it for other devices.

Runs 1 to 3 degrees Celcius cooler after having it raised. I am also deciding if I should have it stand vertically instead. So far letting it stand vertically has not seen a noticeable difference for me.

*****
Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s 

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link:
Fanless Mini PC (Topton)
https://s.click.aliexpress.com/e/_DcRr0c7

*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j 

For Amazon affiliate links
https://wp.me/peMLu6-2C 

NAS CASE 6-bay (+3 SSD) incl. STEP files.

preview_only_full_internal_chassis_v13.stl

Intel CPU Stand LGA 77x 115x 1200 1366 2011

Intel_CPU_stand_socket_77x_115x_1200.SLDPRT

AM3+ to AM4 Stock Cooler Adapter Retention Bracket

retention_bracket.stl

ATX motherboard test stand

Drive an M3 screw through the center hole to use it to locate the motherboard in position. It is possible to put the rest of the screws in but I don't plan to use them, my objective is to prevent the stand from slipping away accidentally while doing testing/troubleshooting.

I might expand on this to use threaded inserts instead and attachments to hold PSU, HDD, or support heavy PCIE components like GPU.

*****
Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link:
https://s.click.aliexpress.com/e/_DeAZr9P

*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j

For Amazon affiliate links
https://wp.me/peMLu6-2C

Minimalistic ITX PC case for onboard graphics

round_apu_external_cover_v12.stl

NZXT GPU Backplate to match the NZXT G12

msi GTX 1070 NZXT backplate 1 part.stl

HDD bay for CoolerMaster NR400

Holds 6 3.5" drives with 2 mounting holes on either side. Uses the 140mm fan mount locations at the front of the case. Highly recommend printing in PETG due to ambient temps inside a case. Print top down with no supports, brim recommended to prevent curling/lifting on the backplate tab.

computer components

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

MCU Guard! The rapid enclosure for microcontrollers!

Fanless Mini PC stand

NAS CASE 6-bay (+3 SSD) incl. STEP files.

Intel CPU Stand LGA 77x 115x 1200 1366 2011

AM3+ to AM4 Stock Cooler Adapter Retention Bracket

ATX motherboard test stand

Minimalistic ITX PC case for onboard graphics

NZXT GPU Backplate to match the NZXT G12

HDD bay for CoolerMaster NR400

Modular case: motherboard (Parts #1-9)

DDR4 Ram Trays

Intel CPU case LGA 1700

Parametric Intel XF SR PCIe Bracket

Nzxt g12 led bracket.stl

Ripjaws V5 RAM cover

Zalman-CNPS17X-pin.stp