SantaCam

Cap.stl

Phone stand for overhead light

phone stand for overhead light_karenchaudesigns.stl

MeFOTO PU-50 Tripod Plate

Tripod Mount v2.stl

CameraMount - Wyze Cam v2

This serves as a camera mount/base plate designed for use with another model by OtakuMx. For more details, you can explore it further at the following link: https://than.gs/m/603109.

This base is compatible with the older Wyze Cam v2 due to its slightly larger size compared to the newer models. It features a friction fit in the mount, allowing you to effortlessly insert the camera and adjust its direction to your desired viewing angle.

Guitar/Camera Strap Hardware (+laser & sewing patterns)

Double Loop.stl

Logitech C920 and Amazon Blink Mini dual camera mount

Mount.STL

SD and micro SD card holder collection

sd card and micro holder 10

Heart SD card holder

Heart Sd card holder

Axis M3045-V Mount for Grid Tile T-Bar

Axis M3045-v grid tile mount base.stl

3D printed ring light

Print_1.stl

Cable Entry Seal

This is a 30mm long bushing (meant to be printed in TPU or flexible filament). The center diameter is 5mm and the outside diameter is 24mm. This is a perfect solution to plug the large holes required for Amcrest, Dahua, Hikvision, Uniview, and other manufacturers which use a water resistant cable cover assembly.

Drill your hole, insert everything, then feed this bushing onto the cable and stuff it into the hole. The bushing is slightly larger than a 7/8" drill hole (the size required to fit a cable head cover). As you fit it into the hole, it will squeeze the cable as well and seal up.

Camera battery charge wall mount .stl

Wall mounted battery charger holder, designed to work with a stock canon battery charger but should probably work with other brands. Power cord is routed around the charger through the clips down to the wall plug. Textured back of the print allows for sticking the holder to the wall with double sided tape but it can also be screwed through the holes on the sides.

I printed mine with standard PLA at very low infill and wall thickness to allow for some flex so the charger can be easily removed if needed. If the model is printed with the filament color closely matching the wall color, in blends nicely and is hardly visible.

Raspberry Pi 3B Articulating Case

Demo

Ender 3 S1 Pro Z axis holder with two articulating arm attachments

I want a camera on my Z axis, but I did not have enough cable to keep my Pi on the table while the camera went up, so I made a holder that can both fit a articulating arm, as well as my articulating case.

Wyze Cam V1/V2 Outdoor Camera Housing

botmount-bot-nolens-v3.stl

Monitor Savior // Shoe Mount Lock for SmallRig

I made this simple part to cover the opening of the cold shoe mount on my SmallRig cage. Two [M4 x 10mm screws](https://amzn.to/2ybL6RS) fasten it into place.

For [SMALLRIG NATO Rail Handle](https://amzn.to/2XtISYI) or similar.

Cold Shoe Mount // Peg Anything

Mount anything with a cold shoe/hot shoe attachment to your pegboard with this simple little part. Super useful organization for photographers and videographers!

camera

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

SantaCam

Phone stand for overhead light

MeFOTO PU-50 Tripod Plate

CameraMount - Wyze Cam v2

View 10 new models

Logitech C920 and Amazon Blink Mini dual camera mount

SD and micro SD card holder collection

Heart SD card holder

Axis M3045-V Mount for Grid Tile T-Bar

3D printed ring light

Cable Entry Seal

Camera battery charge wall mount .stl

Raspberry Pi 3B Articulating Case

Ender 3 S1 Pro Z axis holder with two articulating arm attachments

View 78 new models

View 21 new models

View 20 new models

Kobra Max Lifecam 5000 Mount

View 66 new models

View 20 new models