Ribbon Gift Box B Lite with ribbon loop and slot | Insert for AAA batteries | Christmas gift box

LID_Gift Box B Lite_ribbon_03fit_karenchaudesigns.stl

Ribbon Gift Box A Lite with ribbon loop and slot | Insert for AA batteries | Christmas gift box

LID_Gift Box A Lite_ribbon_03fit_karenchaudesigns.stl

Small Gift Box w/ Insert for up to 8 AA Batteries

gift box lid_AA batteries_8x2slot_karenchaudesigns.stl

Potion Stash Holoprops

Potion_Stash_Holoprops.stl

peg-canonbattery-lp-e8.stl

These bad boys are meant to hold Canon LP-E8 Batteries (used for their T-series cameras) when they are in their cases. 

Made for use with standard pegboards with 1/4" holes spaced 1" apart

X-wing Battery Holder

Small desktop battery holder shaped like an X-wing. Keep up to 11 batteries handy in this Star Wars inspired holder. 

Keep up to 4 - AAA, 4 - AA, 2 - C, & 1 - 9 Volt battery handy on your desk with this X-wing battery holder.

Should print on its back without supports.

CR2025 Battery Box

CR2025 V1.23.3mf

AA Battery Box

AA V1.25.3mf

CR2032 Battery Box

CR2032 Box V1.23.3mf

AAA Battery Box

AAA V1.25.3mf

Gridfinity Ryobi 4V Battery Bins

Gridfinity 1x1 Ryobi 4V Bin.stl

Gridfinity Milwaukee Battery Holder 2x2

A Gridfinity compatible 2x2 holder for Milwaukee batteries that even lets the batteries lock into the model. If you use the standard 6mmx2mm magnets in the holes provided they should be strong enough to hold this in place on the base plate while the battery slides out, provided that you push the release buttons on the battery all the way in as you take it off. There is an overhang towards the top of the model that not all filaments will handle well, with PLA it did bridge okay for me and a hobby knife makes short work of any small drooping pieces.  Happy Printing! 

Gridfinity CRXXXX Battery Bin Collection

This is a collection of Gridfinity compatible bins that hold all of your tiny CR style lithium cells. I have a variety of sizes so far and am currently making more. In the future I will add some mixed ones that can hold multiple types of button cells at once. Happy Printing!

Gridfinity 1x1x2 CR927 x21 Battery Bin.stl

Simple AA Battery Tray

I designed this for myself to have 4x AA batteries available without them rolling around on a desk.

Triple 18650 Battery Container - Vase Mode

triple 18650 container-body_v1.stl

Girdifinity 9 Volt Battery Holder

Holds 5 standard 9 volt batteries in a 2x1 grdfinity slot.

The slots of the batteries are designed to fit the largest allowed size for 9 volts, so they likely fit your batteries loosley.

Gridfinity AAAA and 9v Battery Holder

A standard 2x1x3 Battery holder. Holds 8 AAAA Batteries and 4 9v Batteries with convenient tapers to allow the batteries to slide in easily.

An extension of #GridFinity, open sourced by Zach Freedman:
https://www.youtube.com/watch?v=ra_9zU-mnl8

#Gridfinity Holder-2x1x3-8AAAAand49vBatteries

Gridfinity AAA Battery Holder

A standard 2x1x3 AAA Battery holder. Holds 21, with convenient tapers to allow the batteries to slide in easily.

An extension of #GridFinity, open sourced by Zach Freedman:
https://www.youtube.com/watch?v=ra_9zU-mnl8

#Gridfinity Holder-2x1x3-21AAABatteries

Gridfinity AA Battery Holder

An extension of #GridFinity by Zach Freedman:
https://www.youtube.com/watch?v=ra_9zU-mnl8

A standard 2x2x3 AA Battery holder. Holds 25, with convenient tapers to allow the batteries to slide in easily. I made sure to add a bit of extra space as rechargeable batteries are often thicker than standard.

#Gridfinity Holder-2x2x3-25AABatteries

Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

Designed to interface with Zack Freedman's #Gridfinity system. Dedicated spots for bulk AA, bulk AAA, AAAA, 2032 (CMOS battery), A97/LR44/Other (Calipers, etc.), 18650 and 9-volt batteries. Prints well with 0.4 or 0.6 nozzle. 

Supports not necessary unless you're using the magnet holes in the bottom, in which case you'll want supports on "touching buildplate" mode. Tolerances are tight at ~0.5 mm due to the sizes of the batteries and needing to stick to 3-unit-wide model, but this should be achievable with pretty much any printer. For best printing, only adjust horizontal expansion if necessary to fit the batteries since the walls are all modeled to multiples of 0.4mm. Changing horizontal expansion will likely increase print time and reduce quality.

batteries

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Ribbon Gift Box B Lite with ribbon loop and slot | Insert for AAA batteries | Christmas gift box

Ribbon Gift Box A Lite with ribbon loop and slot | Insert for AA batteries | Christmas gift box

Small Gift Box w/ Insert for up to 8 AA Batteries

Potion Stash Holoprops

View 78 new models

X-wing Battery Holder

CR2025 Battery Box

AA Battery Box

CR2032 Battery Box

AAA Battery Box

Gridfinity Ryobi 4V Battery Bins

Gridfinity Milwaukee Battery Holder 2x2

Gridfinity CRXXXX Battery Bin Collection

Simple AA Battery Tray

View 25 new models

Girdifinity 9 Volt Battery Holder

Gridfinity AAAA and 9v Battery Holder

Gridfinity AAA Battery Holder

Gridfinity AA Battery Holder

Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)