Computer-1 Clone.dxf

This is a clone/recreation of the Teenage Engineering Computer-1 ITX case. 

I have not been able to verify the dimensional accuracy of this compared to the physical Computer-1 case but I have based the dimensions on the Mini-ITX standard and on the dimensions of the fan mounts so it should be roughly correct. 

This is provided for personal use and comes no guarantee of accuracy. 

Pocket Operator Flip Case System

Case with hinge

OP-1 Knob Replacement

Replace your missing OP-1 knob or print it in custom colors with this replica of the original, re-designed to suit 3D printing. No supports required.

For more options, check out the [OP-1 Super Customizer Kit](https://www.myminifactory.com/object/3d-print-271154)

Photographed models were printed with [MatterHackers PRO series PLA](http://bit.ly/PRO-PLA)

PO-80 / GAKKEN Blank Record

1MM Disc.stl

OP-1 Super Customizer Kit

Customize your OP-1 synthesizer by Teenage Engineering with this massive collection of knobs, dials, and doodads. Designed for easy printing and maximum fun! 

Download includes:

30 knob styles
4 volume knob styles
3 frames for the OLED screen
4 crank styles
3 bender styles
replacement foot
bestcase protective case + stand
knob and volume tools to make your own custom knobs (subtract from other models)*
*requires the ability to subtract STL from other models, which you can do in Microsoft 3D Builder and other free software.

Use default print settings. All files print without support materials

 

For 'dot' variations, insert 1.75mm filament into hole and trim flush for color accent

Try out the basic replacement knob for free here.

 

Photographed models were printed with MatterHackers PRO series PLA and SpiderMaker 3D Matte PLA

OP-1 BestCase Decksaver and Stand // Waveform (multipass multicolor)

e-case.stl

Teenage Engineering OP-1 | OP-1F | OP-XY Stand

op-stand_v1_128_PLA_os.3mf

OP-1 BestCase Decksaver and Stand // Resonance [Red Eye Series]

Protect your OP-1 in the coolest way possible with a _decked out cases!_ The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

This design comes from my Red Eye Series, which consists of 3 original art pieces inspired by sleepless nights spent searching for inner peace while making tunes.

---

To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these [Grifiti Bands](https://amzn.to/2Vs8Cn7) (also on [eBay](https://ebay.us/WTUA4B)) or [these](https://amzn.to/2KlG1JT).

 

Pocket Operator Fold-Up case

PO-20_fold_case.stl

OP-1 BestCase Decksaver and Stand // Interference

Protect your OP-1 in the coolest way possible with a _decked out cases!_ The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

---

To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these [Grifiti Bands](https://amzn.to/2Vs8Cn7) (also on [eBay](https://ebay.us/WTUA4B)) or [these](https://amzn.to/2KlG1JT).

 

Teenage Engineering

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Computer-1 Clone.dxf

Pocket Operator Flip Case System

OP-1 Knob Replacement

PO-80 / GAKKEN Blank Record

OP-1 Super Customizer Kit

OP-1 BestCase Decksaver and Stand // Waveform (multipass multicolor)

Teenage Engineering OP-1 | OP-1F | OP-XY Stand

OP-1 BestCase Decksaver and Stand // Resonance [Red Eye Series]

Pocket Operator Fold-Up case

OP-1 BestCase Decksaver and Stand // Interference

OP-1 BestCase Decksaver and Stand // Transcends [Red Eye Series]

OP-1 BestCase Decksaver and Stand // Wicker

OP-1 BestCase Decksaver and Stand // Scallop

OP-1 4 Pedal Kit

PO-stand

Pocket Operator Case Collection