EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

The Reading Dragon Book Nook

DRAGON- The Reading Dragon Book Nook.stl

Pokeball Clicker Fidgets - PACK 1

Pokeball Clicker_Button.STL

Mini Monster #3 Baby Shark

Mini shark.stl

M6D Magnum - Halo Cosplay Prop Kit | No Supports, No AMS, No Glue

Earth Brown.stl

Cozy Vase (Small)

CozyVase_Small_Fuzzy.stl

Xtra Grippy Guitar Pick  // 0.8mm, 1.0mm, 1.2mm Thicknesses

Xtra Grippy Single 1.0mm.stl

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Wavy Springo

Another amazing Springo printed without supports using regular old PLA! This Springo has a smooth wavy surface that can come off as fun or classy, depending on your color choice.

 

Print at .15mm layer height for this to work correctly. Check the layers in your slicer, there should be a 1-2 layer gap between each layer of the spring. I print with 3 shells/outlines and 7 top, 6 bottom layers so the spring itself is solid. After printing, separate carefully with a palette knife, butter knife, etc. How easily the springo separates will vary based on your printer, filament, slicer settings, etc.. So good luck and please share your results!

You should be very cautious separating the layers of the Springo, but once it's correctly popped apart these things are surprisingly resilient for PLA prints. 

Model photographed was printed with [MatterHackers PRO PLA Neon Green](http://bit.ly/NeonGreenPLA). It looks wicked, and glows under a black light!

 

Mira's Glaive - Polearm Kit (No AMS, No Support, No Glue)

Pastel Periwinkle.stl

Fuzzy Checkers Planter / Container (100mm)

FuzzySprinkles_Planter_Prusa.3mf

Decorative Christmas Tree With Ornaments and Train - Support Free

XMasTree.stl

Mini Monster #3 Baby Shark Keychain

Mini shark 3 keychain.stl

Dragon's Hoard Coin Bank

Dragon's Hoard Coin Bank .stl

KROMATIK Pot 003

KROMATIK_003_wHoles.stl

MiniMonster4BabyChameleonKeyChain

KeychainMiniMonster4BabyChameleonPrintStart3D.stl

"Stairs to Nowhere: an unique lamp"

stairs lamp top.stl

Zoey's Dagger - Dagger Kit (No AMS, No Support, No Glue)

Silk Gold.stl

Geometric (Easter) Egg

1 of 8 eggs I've made for Easter/Spring celebrations, neat little things for decorating or for egg hunts etc.
You can find the rest on my profile, they're also shown in the pictures

Shouldn't need supports - the models pictured were printed without

Mjolnir

Fossil Grey.stl

Support Free

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

EZPZ Pegboard Hook // 25mm Reinforced Hook

The Reading Dragon Book Nook

Pokeball Clicker Fidgets - PACK 1

Mini Monster #3 Baby Shark

M6D Magnum - Halo Cosplay Prop Kit | No Supports, No AMS, No Glue

Cozy Vase (Small)

Xtra Grippy Guitar Pick // 0.8mm, 1.0mm, 1.2mm Thicknesses

EZPZ Pegboard Hook // 20mm Hook Type B

Wavy Springo

Mira's Glaive - Polearm Kit (No AMS, No Support, No Glue)

Fuzzy Checkers Planter / Container (100mm)

Decorative Christmas Tree With Ornaments and Train - Support Free

Mini Monster #3 Baby Shark Keychain

Dragon's Hoard Coin Bank

KROMATIK Pot 003

MiniMonster4BabyChameleonKeyChain

"Stairs to Nowhere: an unique lamp"

Zoey's Dagger - Dagger Kit (No AMS, No Support, No Glue)

Geometric (Easter) Egg

Mjolnir