TruviaTwist Plug-in threading

TruviaTwist.step

Pokémon Card Box - Snap Fit Box

Print-in-place snap fit box made to fit Pokémon cards!

1 Piece design
Prints great at 0.16mm layer height
No supports required

Do you want to kickstart your very own 3D printing business? Become a Member on my Thangs page to receive the right to sell any of my 3D printed models in your own store!

Snap Fit Box Blank 50x100x50mm

Print-in-place snap fit box
50x100x50mm(outer measurement)
Feel free to remix this blank box!

Prints great at 0.16mm layer height
No supports required

Do you want to kickstart your very own 3D printing business? Become a Member on my Thangs page to receive the right to sell any of my 3D printed models in your own store!

Wall mounted ski rack

Skis take up a lot of space, falls over and are generally hard to organize .

This wall rack can hold any width ski, including the widest powder skis, or several XC-skis. I use multiple to store all of my families skis in our garage. Countersunk holes for mounting.

Printed in PETG
X-pattern infillat 20%
With supports (not needed if you dont want the end stop) laying on it's back to fit more pieces in one print. 

Big Snap Fit Box Blank 100x100

Twice as big as the original!
Print-in-place snap fit box
100x100x100mm Box
Feel free to remix this blank box!

Prints great at 0.16mm layer height
No supports required

Do you want to kickstart your very own 3D printing business? Become a Member on my Thangs page to receive the right to sell any of my 3D printed models in your own store!


Snap Fit Box Blank 100x100

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Small Snap Fit Box Blank 35x35x35mm

Print-in-place snap fit box
Perfect for small things
35x35x35mm Box
Feel free to remix this blank box!

Prints great at 0.16mm layer height
No supports required

Do you want to kickstart your very own 3D printing business? Become a Member on my Thangs page to receive the right to sell any of my 3D printed models in your own store!

Storage Box | Stackable | Top Mounted | Magnetic | Waterdrop

WaterDropBox.stl

Spool Storage System with Magnetic Closure - Lite Version

Spool Storage System - Lite.stl

EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Hex Shelf - Honeycomb Wall Shelf

Honeycomb Hex Wall - Larger & Stronger Hex Shelf 88x88

big bubble car (1).stl

This is a fun little car I made a few years ago when I was first learning CAD.  It's actually. for storing things, like candy or whatever you like.  Print the attached trunk that snaps into place.



Steelcase cubicle bin

Printed in ASA without supports. Overhangs might not work with some filaments or without appropriate cooling.

Storage

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

TruviaTwist Plug-in threading

Pokémon Card Box - Snap Fit Box

Snap Fit Box Blank 50x100x50mm

Wall mounted ski rack

Big Snap Fit Box Blank 100x100

EZPZ Pegboard Hook // 10mm Hook Type B

View 13 new models

Storage Box | Stackable | Top Mounted | Magnetic | Waterdrop

Spool Storage System with Magnetic Closure - Lite Version

View 17 new models

Hex Shelf - Honeycomb Wall Shelf

big bubble car (1).stl

Steelcase cubicle bin

Collapsible Candy Bucket || Halloween / Experiments

Drinkware Lid Rack Organizer Bundle – Fits YETI lids

Test Tube Holder for Nozzle Cleaner Tubes

Pumpkin Container with Face || Halloween

Spool Storage Bins with Magnetic Closure

Pumpkin Container || Halloween

Gridfinity Cable Winder / Cable Storage