Monitor Pen Stand

A 3D printable pen / pencil stand to attach on to the top of a monitor / TV

ADX96-7 Planter Drainer - Stand Mesh Screen Insert for Plant Pot 

Printable Objects Infinite Containers ADX96-7_240721.stl

Gothic Chain Doll Stand – 1/6 Scale - STL 

Stand_Doll_Ghost_Inspired_1.stl

Manscaped Weed Whacker 2.0 stand

Manscaped Weed Whacker 2.0 stand.stl

Incense Stick Stand

Dhoop_Stand.stl

Floppy Emu Model C Frame Stand.stl

A very simple stand for the Floppy Emu Model C

It will keep your Floppy Emu from .. flopping around. 🤔 Too much, anyway.

Prints without supports. Pictured is PLA with 0.2mm layer height.

Designed for this:
https://shop.bigmessowires.com/products/floppy-emu-model-c

Floppy Emu Modele C Frame Stand.stl

Soldering wire stand (Print in place)

Really proud of this one. Soldering wire stand with print in place hinge and metal shaft slid into a hole. supports most sizes of soldering wire spools, many spools can be installed at once. If you want to access the spools, just lift the metal shaft up. If a small wire spool is installed, there is always more room for insulation tape, scotch tape etc
it works incredibly smoothly and is very strong. the bottom of the stand is corrugated so it grips nicely to a rough desk but there are also round holes for rubber pads.
The middle section has all the main lead exposure health hazards noted down for when you'll inevitably forget about them from all the lead fumes you have been inhaling. The sides have tin and lead elements decals.

_The model is supposed to be printed laying down with the hinge's shaft touching the build plate. The orientation here is very important so that the hinge works properly. I printed mine with .6mm nozzle at .14mm layer height and 10% infill. it's very strong and the letters & decals and perfectly readable. No brim and only one support for the shaft slot on the left side.
After printing, a ~10cm long, 10mm wide shaft is supposed to be pushed into the hole above the hinge. If you dont have a metal shaft, you can always 3d print one though it wont look as neat._

sports card stand

its a stand for sports cards like basketball cards

compliant clip-on phone stand

I created this for my moto g6 with a beetle case, but it would probably work for others. Printed in 35 minutes with 100% infill.

Apple iPhone Magsafe Charging Standby Dockingstation

Magsafe_Stand.STL

Vertical Space-Saver Laptop Stand

laptop-stand-space-saver-by-ondrahaa.stl

Teenage Engineering OP-1 | OP-1F | OP-XY Stand

op-stand_v1_128_PLA_os.3mf

SH128-200A Stand or Base for Infinite Containers 128 Series

Printable Objects Infinite Containers SH128-200A_240607.stl

ADX68-7 Planter Drainer - Stand Mesh Screen Insert for Plant Pot 

Printable Objects Infinite Containers ADX68-7_240723.stl

Storm Cloud and Box for Dragons - 2 Versions

Storm Cloud V2 MMU.3mf

AeroDock Sonic Nexus Modular Station.stl

EZPZ PS5 Controller Wall Mount

EZPZ_PS5controllerWallMount_Holder.stl

Amiibo Stand (Single, 6cm)

single v0.stl

CrossFrame Monitor Riser

CrossFrame Monitor Riser Leg.stl

Dino Headset Stand

dino claw3.stl

Stand

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Monitor Pen Stand

ADX96-7 Planter Drainer - Stand Mesh Screen Insert for Plant Pot

Gothic Chain Doll Stand – 1/6 Scale - STL

Manscaped Weed Whacker 2.0 stand

Incense Stick Stand

Floppy Emu Model C Frame Stand.stl

Soldering wire stand (Print in place)

sports card stand

compliant clip-on phone stand

Apple iPhone Magsafe Charging Standby Dockingstation

Vertical Space-Saver Laptop Stand

Teenage Engineering OP-1 | OP-1F | OP-XY Stand

SH128-200A Stand or Base for Infinite Containers 128 Series

ADX68-7 Planter Drainer - Stand Mesh Screen Insert for Plant Pot

Storm Cloud and Box for Dragons - 2 Versions

AeroDock Sonic Nexus Modular Station.stl

EZPZ PS5 Controller Wall Mount

Amiibo Stand (Single, 6cm)

CrossFrame Monitor Riser

Dino Headset Stand