Slinky Octopus / no supports / 3mf included

Slinky Octopus.stl

Woody Toy Story - Free Sample STL | Full 12-Character Bundle on Profile

Character_2_Woody.stl

Slinky Cactus Fidget Toy - Fun Stretchy Desk Toy

Slinky Cactus.3mf

Slinky (2 sizes)

Large Slinky.stl

Stretchy, Slinky Ghosts (3 sizes)

Large Ghost.stl

Small Banana Springo // Fruit Springos

banana-half-singlepart.stl

Wavy Springo

Another amazing Springo printed without supports using regular old PLA! This Springo has a smooth wavy surface that can come off as fun or classy, depending on your color choice.

 

Print at .15mm layer height for this to work correctly. Check the layers in your slicer, there should be a 1-2 layer gap between each layer of the spring. I print with 3 shells/outlines and 7 top, 6 bottom layers so the spring itself is solid. After printing, separate carefully with a palette knife, butter knife, etc. How easily the springo separates will vary based on your printer, filament, slicer settings, etc.. So good luck and please share your results!

You should be very cautious separating the layers of the Springo, but once it's correctly popped apart these things are surprisingly resilient for PLA prints. 

Model photographed was printed with [MatterHackers PRO PLA Neon Green](http://bit.ly/NeonGreenPLA). It looks wicked, and glows under a black light!

 

Pineapple Springo // Tasty Springos Pack No.1

pineapple-full-bot.stl

Springo Cactus Trichocereus

cactus-wflower.stl

Green Eggs (requires mesh fabric), Slinky Ham and Plate

Egg shell bottom (small).stl

Springo Skull

What a spooky Springo!

Print at .15mm layer height and separate spring manually after printing. No supports required!

100% infill is recommended. Results vary by slicer, but basically make sure the layers above and below the small Springo gaps are printing solid (Simplify3D recognizes these as top and bottom layers so you can use a lower infill, but Cura won't recognize the layers as top/bottom, and therefor prints infill instead of solid).

You can use a glow-in-the-dark filament like [Polymaker Blue Glow PLA](https://amzn.to/3KtK8mB) for a cool effect!

[This is a remix of the "Low Poly Skull" by slavikk on Thingiverse](https://www.thingiverse.com/thing:906562)

[Relevant Video](https://www.youtube.com/watch?v=hMAgMDgi7xQ)

Springy Ghost || Halloween

Springy Ghost (Happy) V1.3.stl

Giant Springo Door Stop

Springo.stl

Classic Springo

Believe it or not, you can print a super springy Springo on your FDM 3D printer without any support material!

For best results, print at .15mm layer height with 100% infill. You may scale this by proportionately changing layer height. Prints without supports, just carefully pry the Springo apart after printing! See [my video about it](https://www.youtube.com/watch?v=HgY7ovYWplg) for more details.

Springo Santa Hat

SantaHatSpringoComb.stl

Pot of Gold Slinky (2 sizes)

POG_Large Slinky.stl

Rocket Springo

A spacey Springo for wobbling through the universe! For best results, print at .15mm layer height with 100% infill. You may scale this by proportionately changing layer height. Prints without supports, just carefully pry the Springo apart after printing! I personally only split apart one of the two helical cuts so the rocket is more springy than floppy (and I was scared of breaking it!)

If you've got a giant printer, combine this with my Rocket Smoke model for an impressive display!



Candy Corn Slinky

CC Slinky_less tolerance.stl

Pentagon Springo

This five-sided Springo behaves a bit differently! For best results, print at .15mm layer height with 100% infill. Prints without supports, just carefully pry the coil apart with a palette knife, butter knife or something similar after printing!

[Relevant Video](https://www.youtube.com/watch?v=HgY7ovYWplg)



Springo Sphere

springosphere-half.stl

Slinky

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Slinky Octopus / no supports / 3mf included

Woody Toy Story - Free Sample STL | Full 12-Character Bundle on Profile

Slinky Cactus Fidget Toy - Fun Stretchy Desk Toy

Slinky (2 sizes)

Stretchy, Slinky Ghosts (3 sizes)

Small Banana Springo // Fruit Springos

Wavy Springo

Pineapple Springo // Tasty Springos Pack No.1

Springo Cactus Trichocereus

Green Eggs (requires mesh fabric), Slinky Ham and Plate

Springo Skull

Springy Ghost || Halloween

Giant Springo Door Stop

Classic Springo

Springo Santa Hat

Pot of Gold Slinky (2 sizes)

Rocket Springo

Candy Corn Slinky

Pentagon Springo

Springo Sphere