T. REX BRINQUEDO. 

ESPADA ALADDIN. SLDPRT

Friendly Articulated Slug with hidden magnets

I used 2 magnetics (6x3mm).
With a layer height of 0.2mm you should set up a pause at layer 19.

The last to parts of the slug are not movable because of the magnets.
The slug is 150% scaled because of the magnets.
You should print with less weight, for e.g. 0% infill and not more than 2 walls.

Magnetics that I used: https://www.aliexpress.com/item/32951137017.html?spm=a2g0o.cart.0.0.22783c00OsamVW&mp=1

If you don't have a 3D printer, I sell it on Etsy: https://www.mikebayer3d.etsy.com

The original design is from _Isaiah_
https://www.thingiverse.com/thing:4727448

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Full-sized Anatomically Correct Articulating Spine

Lumber Vertebrae Display.stl

RODA MAIS PNEL.SLDPRT

Judge Dredd (fan art)

BRINQUEDO.SLDPRT

Drill Tetrahedron

Drill Tetrahedron from Perspectiva Corporum Regularium

Cut Tetrahedron

Cut Tetrahedron from Perspectiva Corporum Regularium

Ender 3 S1 motherboard cover 80mm fan

New to Onshape and making 3d models, so it's pretty basic but this allowed me to put a Noctua NF-A8 FLX 80x80x25mm fan right below the motherboard, I didn't see how the other ender 3 ones could work. Holes might be a little small depending on how your mounting, i used rubber mounts they include in the box, had to drill them a hair, its a stretch but they do fit. Also i didn't see an easy spot to bolt the rear of it to, so its just the front screw and side one. My first attempt was designed upside down so I had to mirror it and reprint, the pics are of the 1st print for those wondering. Step file included for those more talented than me.

NASA Ingenuity .GLB

Mars Helicopter Prototype
https://mars.nasa.gov/resources/22372/mars-helicopter-prototype/

Sherlock Ohms Group Design

STL Full Robot Design.stl

BIKE BMX .SLDPRT

QUADRO .SLDPRT

3D printed hexapod

mainbody BOTTOM.STL

Knob.SLDPRT

Knob , you can resize it to make it fit with your switch. 
 Using solidwork 

spacex_yo.stl

ButterDishCover.SLDPRT

This is a cover (lid) designed for a butter dish. It can be placed onto the dish into its grooves over any items that need to be protected from dust, flies, etc. 
The thickness of the cover is 3mm.
Dimensions: 146 x 91 x 83.6 mm
CAD Files for the butter dish can be found in my account.

wildmutt-ben10

All steps in youtube: https://youtu.be/UOxnvGm8WjU


Microscope Slide Holder

A microscope slide holder for 26 x 76 x 1mm (1" x 3" x 3/64") microscope slides. It can hold up to 3 slides, makes comparing slides easier. Sometimes I have to check 20+ samples and also compare them at times. This helps me do it without swapping slides each and every time.

The microscope slide holder dimensions are:

86 x 128 x 3 mm

The slide holder fits on our Olympus inverted microscope with linear rail holders.

Infill percentage doesn't really matter, 100% will increase print time slightly compared to lower percentages. I did mine 100%.

Fibonacci Fearherboard

Bear in mind this is designed as a safety feature and I take no responsibility for its use.

I printed it with PETG at 3mm height (for speed reasons only), wall strength 3, 3 top & bottom layers, 12% gyro infill. Works like a charm. You can put something sticky (rubber tape) at the bottom to give it more grip.
The thumbscrew simply needs a "halt at height" to insert a standard M8 nut.
A M8 coach bolt perfectly fit in the railing of my table saw. All it needed was a little plastic washer to stop it from spinning. You may have to adapt the design to fit your machine.

Happy Printing

Science

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

T. REX BRINQUEDO.

ESPADA ALADDIN. SLDPRT

Friendly Articulated Slug with hidden magnets

View 25 new models

RODA MAIS PNEL.SLDPRT

Judge Dredd (fan art)

BRINQUEDO.SLDPRT

Drill Tetrahedron

Cut Tetrahedron

Ender 3 S1 motherboard cover 80mm fan

NASA Ingenuity .GLB

Sherlock Ohms Group Design

BIKE BMX .SLDPRT

3D printed hexapod

Knob.SLDPRT

spacex_yo.stl

View 12 new models

wildmutt-ben10

Microscope Slide Holder

Fibonacci Fearherboard