Rotating RC Car Stand/Table - TRX-4

10th scale rc paddle tire

I designed this tire for snow, sand, and water. It is made for a 12 mm wheel hex and has an outer diameter of 10.5 centimeters to the tips of the paddles.

RC Car chassis for 1/43 scale body

RC Wheel Hex Adapters 17mm+14mm

rustler hex adapter.stl

Print In Place Adjustable EDF (Electric Ducted Fan)

Something I made at midnight - a basic (possibly print-in-place) EDF, for RC aircraft. It uses a 3mm grubscrew to tighten down the wing tips, so you can adjust each blade by hand after printing to make sure it's juuuuuust close enough to the duct, to avoid performance issues.

Enjoy, and let me know how it prints (and if it works)!

Trx4 RC Trailer

MYDESIGHNTrailerRCFull v4.obj

Articulation Obstacle #2.stl

Made this from scratch in TinkerCad to be added to our table top RC Crawler course for the 1:24 scale crawlers we have. It's pretty simple as far as mechanics, I made the ramps two piece so you could place them on a bed easier if you have a smaller print bed. The other reason was since you'd be using M8 screws it adds extra counter balance weight to bring it back down to one side, I added multiple nuts to it to add extra weight and works perfectly.

I added diamond plate pattern to give extra texture for traction. You don't need the caps for the base to hold the ramps down, but doesn't hurt.

I super glued the approach ramps to it, but I guess you don't need them but makes it longer, but with added weight of bolt and nuts it will still come back down to one side even without the approach and departure ramps if you didn't want them.

1:24 Scale RC Crawler Teeter Totter

Teeter Totter Base Caps.stl

TX16S Protectors

Gimbal & Switch Protectors - Gimbal Protector (1).stl

FHW Battle Bot concept

Hello Tribe,

This is the battle bot concept that we designed on stream today. Please enjoy

Cheers
Maker Millwright

MOTOR MOUNT FOR FT EXPLORER, FOR A2212 MOTOR

MOTOR MOUNT.stl

Motor Mount for goldguy's Nutball

This motor mounting plate is for goldguy's Nutball RC air"plane".

It already incorporates the 5 degrees down thrust and 3 degrees right thrust. Additionally, it features a pass-through hole for the motor wires.

The front face is approximately 35mm x 35mm.

RC Car Ramp 

This is a ramp designed for RC Cars. The Solidworks part file has been uploaded and dimensions can be customised as per requirement.

NOTE: The QR Code on the ramp can be replaced with any other image or text as required.

RC

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Rotating RC Car Stand/Table - TRX-4

10th scale rc paddle tire

View 25 new models

RC Wheel Hex Adapters 17mm+14mm

Print In Place Adjustable EDF (Electric Ducted Fan)

Trx4 RC Trailer

Articulation Obstacle #2.stl

1:24 Scale RC Crawler Teeter Totter

TX16S Protectors

View 10 new models

View 14 new models

Motor Mount for goldguy's Nutball

View 12 new models