Baby Birthday Dragon

CW3D Baby Birthday Dragon Clicker.stl

Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Short Bony Basilisk: 
Coming Soon
Loose Tolerance Short Bony Basilisk: 
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Short Bony Basilisk, be sure to check out it’s more mature, older sibling, the :ong Bony Basilisk:

Tight Tolerance Long Bony Basilisk: 
https://than.gs/m/936921
Medium Tolerance Long Bony Basilisk: Coming Soon
Loose Tolerance Long Bony Basilisk: 
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Narwhal - Hatchling

CW3D SANTA_Narwhal Hatchling.stl

Drakaryn Articulated Dragon

Drakaryn Articulated Dragon.stl

Lioness - Cinder Hatchling

Cinderwing3D Lioness Hatchling Colors.3mf

Walrus - Hatchling

CW3D SANTA_Walrus Hatchling.stl

Reindeer - Hatchling

CW3D Reindeer_Both Hatchling Colors.3mf

Articulated Print in Place Dragon Rockscale

Articulated Dragon Rockscale Mesh Mayhem.3mf

Cat - Cinder Hatchling

Cinderwing3D Cat Hatchling.stl

Duck - Hatchling

CW3D Duck Hatchling.stl

Fidget Femur

Such a weird design. I have no other explanation.

This fidget femur uses a print-in-place ovoid joint to create and unique tactile movement. This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

See here for video: https://youtu.be/br1-jSqgU18

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. 
You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.


Dragonfly - Hatchling

CW3D Dragonfly Hatchling.stl

Lizard - Hatchling

CW3D Lizard Hatchling.stl

Tiny Spider - Candy Corn

Cinderwing3D Tiny Spider Candy Corn.stl

Caterpillar - Hatchling

CW3D Caterpillar Hatchling.stl

Baby Nightwing 2025

Cinderwing3D Baby Nightwing 2025.stl

The Impossible Gear Fidget

The gears and shaft rotate on this model even though it prints in place. 

Printed on the [Mulcore]( https://github.com/3dprintingworld/Mulcore

**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


Print-in-Place

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Baby Birthday Dragon

Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

Narwhal - Hatchling

Drakaryn Articulated Dragon

Lioness - Cinder Hatchling

Walrus - Hatchling

Reindeer - Hatchling

Articulated Print in Place Dragon Rockscale

Cat - Cinder Hatchling

Duck - Hatchling

Fidget Femur

Dragonfly - Hatchling

Lizard - Hatchling

Tiny Spider - Candy Corn

Caterpillar - Hatchling

Baby Nightwing 2025

The Impossible Gear Fidget

Manticore - Hatchling

Tiny Spider - Poison Apple

Koi - Hatchling