**SKEWBITS** is an original puzzle game designed specifically for 3D printing. Fit the four swiveling Skewbits into various silhouettes. The premise is simple, but you may be surprised by how challenging the problems can get!

---

This is the **Premium Set** for SKEWBITS v2.0. Download includes:
- game board, bits, and problems 001-010
- premium versions of board, extra bits, and storage cases
- PDF solution guide

**_Additional files:_**
- [Preview Set (free)](https://than.gs/m/1063419?affiliateCode=MAKE)
- [Problems 011-015](https://than.gs/m/1063431?affiliateCode=MAKE)
- [Problems 016-020](https://than.gs/m/1063432?affiliateCode=MAKE)
- [Problems 021-025](https://than.gs/m/1063433?affiliateCode=MAKE)
- [Problems 026-030](https://than.gs/m/1063434?affiliateCode=MAKE)
- [Problems 031-035](https://than.gs/m/1063435?affiliateCode=MAKE)
- [Problems 036-040](https://than.gs/m/1063436?affiliateCode=MAKE)
- [Problems 041-045](https://than.gs/m/1063437?affiliateCode=MAKE)
- [Problems 046-050](https://than.gs/m/1063438?affiliateCode=MAKE)
- [Full Set (premium set + problems 001-050)](https://than.gs/m/1063421?affiliateCode=MAKE) _*single purchase_
---

This is _version 2.0_ of the game, with many exciting upgrades:
- All parts newly redesigned and 50 problems in total!
- The 'bits' have larger hinges that are stronger, easier to print, and fit into the problems more visibly. 
- The bits and problems can no longer be placed upside down by accident. 
- Everything was scaled up 120% so the bits are easy to pick up an manipulate by all hands big and small. 
- The problems have been redesigned to use less material but maintain the necessary rigidity
- I've moved the number labels to the front to make them much more clear. 
- I've rearranged some of the problems so the difficulty increases more progressively at first.
- Thanks to the brilliant solver program by [Darci Peoples](https://darcipeoples.com/), I've changed many of the problems to have fewer solutions, making certain problems significantly more challenging!
- The updated solution guide PDF is attached, including problems 001-050

[Watch my video about version 2.0](https://youtu.be/aLKqzI0Va5E)

---

**_Printing Guidelines_**
- bits : 0.16mm layer height, 2-3 walls, 0.4mm nozzle, 15% infill
- problems : 0.16-0.25mm layer height, 1 wall, 100% infill; *printing the first layer with one wall can help with bed adhesion of the number labels*
- board : 0.16mm layer height, 2-3 walls, 15% infill; *for better grid visibility swap filaments at 1.5mm layer height
- cover : _'wLogo'_ version is two parts. Print combined using a multicolor printer or using [Multipass Multicolor Printing](https://makeanything.design/multipass-multicolor/) technique for single extruders.
- board_premium : filament swap at 8.2mm height for better grid visibility. _'TPUgrip'_ can be glued to the bottom for a nonslip board, printed with TPU 95a or similar flexible filament. Use [E6000](https://amzn.to/3UIOdso) adhesive or similar.
- case : use _'size20'_  together with _'Sleeve_Wide'_ or _'size30'_ with _'Sleeve_Tall'_. Wide sleeve holds 21 or 20 problems with the Handle, Tall sleeve holds 27 or 26 problems with Handle. Handle can be used loose (slide in from the bottom of the sleeve) or glued into place.
---

Photographed models were printed using PolyTerra Matte PLA [(US Link)](https://bit.ly/polyTerra) Also on [Amazon](https://amzn.to/3PHOxFA)

SKEWBITS v2.0 Puzzle Game // Premium Set + Problems 001-010

bit_A_red.stl

This folding scalpel handle is stronger and stiffer and can accommodate all #4 scalpel handle blades (up to 60mm in total length).  I have tested it with #18, #20, #21, #22, #23, #24 and SwitchBack blades.  

The pivot utilizes an offset radii design allowing it to print easily and still rotate tight in the open and closed positions.  Check it out!

100% printed - no hardware, fasteners, or adhesives required.  No support required

Print Settings:

I have tested this design on multiple printers using PETG, ABS+ and PLA.  Print settings can vary significantly between users so please note my settings and let me know if you are having difficulty.  I am committed to helping everyone get great print results to the extent I can so please contact me if you are having issues.
  
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON    (Print thin walls in Cura)
Wall Generator = Arachne
Infill = 40% Cubic
Ironing = ON
Support = All required support is designed into this product  
Print Orientation = As per the STL files

---
**Related Links**
[Logical Utility Knife version 2.0](https://than.gs/m/1448655)
[Scalpel Station Widget - with Auto Blade Removal and Capture](https://than.gs/m/1089744)
[Folding Scalpel XL v2.1 (for #60 Blades)](https://than.gs/m/1110703)
[Skeleton Utility Knife (original version)](https://than.gs/m/1063352)

---
Please [join the LogicalPlanet Discord community via my linktree](https://linktr.ee/logicalplanet) to discuss this and any other LogicalPlanet projects, upcoming projects, ideas and anything else related to LogicalPlanet.   

**[https://www.logicalplanet.com/](https://www.logicalplanet.com/)**
email me at [logicalplanet3d@gmail.com](mailto:logicalplanet3d@gmail.com) 

---
**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.  

2024-07-26 Update: This is now version 2.1 of this knife which now has improved geometry to help keep the blade closed and or opened as well as a detent on the closed side to minimize the chances of it partially opening in your pocket.  





Folding Scalpel Pocket Knife v2.1

Folding Scalpel 2v11d__Standard.stl

A nice little hand brush and dust pan set to keep your place tidy! This small variation has a brush that is roughly 120 mm wide with 60 mm bristles. The dust pan is 145 mm wide.

**_Printing Guidelines_**

Printing the brush requires a well tuned printer and proper slicer settings to successfully create the long bristles using bridging. I suggest a 0.4mm nozzle and Classic rather than Arachne wall generator. Slow bridge speed, high cooling, and lower extrusion temperatures can all help get clean bridging. You may want to first print the smaller [Detail Dusting Brush](https://than.gs/m/1044850?affiliateCode=MAKE) to make sure your settings are appropriate before trying this larger print.

The handles should be fine with your default print settings. Six [6 mm x 3 mm neodymium disc magnets](https://ebay.to/3kMB1A4) can be [glued](https://amzn.to/44LMqVm) into the handles so they stick together for storage (make sure to get the magnet polarities right!)

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab Marble PLA and Purple ABS](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


Small Brush & Dust Pan

Small_Brush.stl

This is not your average gift box...  It is functional, fun and practical.  It has four 10-digit programmable lock tumblers incorporated into the lid.  Which means there are 10,000 possible combinations.  You can secure your gift and share the passcode at the perfect moment—whether it’s on Christmas morning, a birthday, or another special occasion.

No more sneaky peeks into presents before the big day! This clever gift box is as practical as it is fun, adding an extra layer of anticipation to gift-giving.

**Why Choose This Gift Box?**
* Secure and Unique: The built-in combination lock lets you control when the gift can be opened.
* 100% 3D Printed: No hardware, fasteners, or adhesives required. Everything you need is printed.
* Easy to Assemble: No supports or post-processing necessary.

**Assembly Instructions**
Please see my video for instructions on how to assemble this.

**Print Settings**
For the best results, use these settings:
* Material: PLA or PETG (other materials may also work)
* Nozzle: 0.4mm
* Layer Height: 0.2mm
* Line Width: 0.4mm
* Wall Count: 4 (1.6mm)
* Top and Bottom Layer Count: 5
* Detect Thin Walls: ON
* Infill: 100% recommended, minimum 40% (Cubic pattern)
* Ironing: Not required
* Brim: No
* Support: No

---
**Related Links**
[3-digit Logical CardLock Case - The Programmable Gift Card Case with a Twist](https://than.gs/m/1464652)
[4-digit Logical CardLock Case - The Programmable Cash Case with a Twist](https://than.gs/m/1467071)
[PuzzleLock Box — Lock and Puzzle in a Box](https://than.gs/m/1439725)
[BinaryBin – 16-Digit Binary Coded Lockable Container](https://than.gs/m/1354661)
[StashCan 2.1 - 3D Printed Secret Safe with Programmable Lock](https://than.gs/m/1060354)
[Sequential Discovery Puzzle Gift Box #1 (GBS1)](https://than.gs/m/1227965)

---
Please [join the LogicalPlanet Discord community via my linktree](https://linktr.ee/logicalplanet) to discuss this and any other LogicalPlanet projects, upcoming projects, ideas and anything else related to LogicalPlanet.   

**[https://www.logicalplanet.com/](https://www.logicalplanet.com/)**
email me at [logicalplanet3d@gmail.com](mailto:logicalplanet3d@gmail.com) 

---
**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.  


Programmable Combination Lock Gift Box

GBL1 1v00a lock wheel (tumbler) (no AMS) (x4).3mf

GBL1 1v00a Main Box.stl

GBL1 1v00a grid.3mf

🎉 Exciting News! 🎉

I’m thrilled to re-enter my Bendy Beast model, which previously won first place, into the Thangs Throwback Contest! 🏆

Why You’ll Love the Bendy Beast:

Universally Compatible: Tailored to fit most printers, the Bendy Beast is ready to make its mark in any maker’s collection.
Newbie-Approved: It’s the perfect project for those just dipping their toes into the vibrant waters of 3D printing.
Zero Hassle: Say goodbye to supports! This fully articulated design prints smoothly, letting you focus on the fun.

COPYRIGHT KINDNESS: At Mesh Mayhem, we cherish creativity and respect ownership. Our designs, including the Bendy Beast, are copyrighted for personal enjoyment.

We encourage personal use and sharing your journey with us, but commercial use requires a special touch – a Mesh Mayhem commercial license. So, if you’re looking to sell, let’s make it official! Our membership offers you the license you need, plus a treasure trove of perks.

Join us, and let’s create magic together!

Please, no commercialization without a license. Let’s play fair and have fun!

Did we catch your eye? We’d love to see your Bendy Beast come to life! Share your prints in the comments and spread the joy.

BendyBeast Articulated Dragon #Throwback

Articulated Dragon BendyBeast Mesh Mayhem.stl

This large pot is the first in my **VESUVIUS Collection**, which features dense herringbone ribs to increase strength while creating a dramatic form.

VESUVIUS 001 is 250 mm tall and 250 mm in diameter at the top. The bottom footprint has a 190 mm footprint. This was designed for use with my [250 mm Floating Drip Tray](https://than.gs/m/1027171?affiliateCode=MAKE) to catch excess water runoff.

**_Printing Guidelines_**

The **VESUVIUS** series of prints are designed to be printed in vase/spiral mode in your slicer. For full scale I suggest printing with a **1 mm nozzle width** (even with a 0.4mm nozzle) and 1.6mm of solid bottom layers. No top layers. **Make sure your slicer is not set to close small gaps.** In BambuStudio I set the _'Slice gap closing radius'_ to 0 mm

For the 'wHole' version of the vase mode print, use the maximum number of solid bottom layers before the holes are covered to avoid interfering with the spiral printing. You can also print the version without holes and simply drill/cut your own drainage holes in the bottom after printing if you plan on growing live plants.

I've also included a 'Solid' version for standard printing, with roughly 3mm thick walls. This will be extra strong, but uses much more material, and I've found the 1mm vase mode version to be sufficient, even at this large size.

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA Basic Gradient (Solar Breeze)](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

VESUVIUS Pot 001 // Large Vase Mode Planter

VESUVIUS_001_Solid.stl

VESUVIUS_001_1mmVasemode_wHoles.stl

VESUVIUS_001_Solid_wHoles.stl

This is a compliant drink holster (based on an off-axis gimbal).   I have included several collar sizes for different can sizes. The adjustable leg compensates for varying can heights.  It is all click-together and adjustable with multiple print-in-place components.

100% printed - no hardware, fasteners, or adhesives required.  No additional support is required.

How I print it:
Material = I used PETG but any material should work.  
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Infill = 40%

Commercial Licensing is available through my Thangs Memberships.

I welcome requests, suggestions and ideas to help make this and all my products better.  Please send me a message any time.



BevvySteady3 Beer/Drink Holster

BS3-02 300 gimbal.stl

BS3-07-666 300.stl

These are collapsible stacking wine storage crates.   Excellent opportunity to clean up your wines and get them organized or to make and sell them for your local wine shop to resell. 

This 2 bottles per layer version requires only a 250mm print bed.  I have also made a 3 bottle per layer version which requires a 300mm print bed. That version is available here...
https://than.gs/m/1116855

100% printed - no hardware, fasteners, or adhesives required.  No support is required.

Print Settings:
 
Material = I recommend PETG but any material should work.  
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Infill = 40%

See my blog for more details and other product info… 
https://www.logicalplanet.com/



Wine Stackers, 2-Bottle per Layer Version

Wine Stackers 1v00a 2-bottle end.stl

Wine Stackers 1v00a side wall.stl

These are collapsible stacking wine storage crates.   Excellent opportunity to clean up your wines and get them organized or to make and sell them for your local wine shop to resell. 

This 3 bottles per layer version requires a 300mm print bed.  I have also made a 2 bottle per layer version which only requires a 250mm print bed. That version is available here...
https://than.gs/m/1116856

100% printed - no hardware, fasteners, or adhesives required.  No support is required.

Print Settings:
 
Material = I recommend PETG but any material should work.  
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Infill = 40%

See my blog for more details and other product info… 
https://www.logicalplanet.com/



Wine Stackers, 3-Bottle per Layer Version

Wine Stackers 1v00a 3-bottle end.stl

[_**V2 is now available HERE**_](https://than.gs/m/1377006?affiliateCode=MAKE)

ITALIC is an eccentric watering can featuring a playful skewed profile. The enclosed container is filled through an opening in the top of the handle, which can also be covered with your thumb while pouring to regulate flow. Like any good fancy designer product, it's slightly awkward to hold. How will you pick it up? :P

**_Printing Guidelines_**

The walls of this container are 1.2 mm thick, and only the handle portion is solid. I suggest printing with a high wall count (5+) to ensure that the thin handle won't snap off.  You also need to ensure that your printer can create watertight models, otherwise this won't be quite as useful. I used default print settings on my Bambu Lab X1-Carbon with ABS and it worked out!

Download includes a version with minimal supports since the handle is unsupported for much of the print, as well as a version of just the watering can. In either case, I would suggest a substantial brim to help with bed adhesion. 

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab Mint ABS](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


ITALIC (V1) Watering Can

ITALIC_can_supported.stl

I have a significantly improved version of this knife which accepts a wide range of blades, version 2.0 posted here...
https://than.gs/m/1092890

-----------------------------------------------
This is a 100% printed and print-in-place folding scalpel.   No hardware or fasteners required.  The scalpel is small, super light (about 8g) and very convenient. I have added a pressure point on the top of the blade which conventional scalpels do not typically have. This helps to give you a safe place to put your index finger and also allows you to comfortably apply pressure when cutting. It is important to note this knife, like all scalpels, is designed to be held like a pencil.

There are 3 different STLs with varying tolerances so you can hopefully find the one that prints best for your setup.  The knife should be super tight after printing.  And, freeing the print-in-place parts is a little more onerous than usual so please take care to work the parts free carefully.  Once the parts are free the knife should work for a long time.  

Inserting and removing the #18 scalpel blade is normal.  The first time inserting a blade it will be a little tight but after that, it will be very smooth.

I have just added a modified version of this file which I think will accommodate a #24 blade as well as a #18 blade.  But I need someone to test it and let me know.  

---
**Related Links**
[Logical Utility Knife version 2.0](https://than.gs/m/1448655)
[Scalpel Station Widget - with Auto Blade Removal and Capture](https://than.gs/m/1089744)
[Folding Scalpel Pocket Knife v2.1](https://than.gs/m/1092890)
[Folding Scalpel XL v2.1 (for #60 Blades)](https://than.gs/m/1110703)
[Skeleton Utility Knife (original version)](https://than.gs/m/1063352)

---
Please [join the LogicalPlanet Discord community via my linktree](https://linktr.ee/logicalplanet) to discuss this and any other LogicalPlanet projects, upcoming projects, ideas and anything else related to LogicalPlanet.   

**[https://www.logicalplanet.com/](https://www.logicalplanet.com/)**
email me at [logicalplanet3d@gmail.com](mailto:logicalplanet3d@gmail.com) 

---
**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.  







Print-in-Place Folding Scalpel

Folding Scalpel 1v00 3d045.stl

**SKEWBITS** is an original puzzle game designed specifically for 3D printing. Fit the four swiveling Skewbits into various silhouettes. The premise is simple, but you may be surprised by how challenging the problems can get!

---

This is the **Full Set** for SKEWBITS v2.0. Download includes:
- game board, bits, and problems 001-050
- premium versions of board, extra bits, and storage cases
- PDF solution guide

**_Split Downloads:_**
- [Preview Set (free)](https://than.gs/m/1063419?affiliateCode=MAKE)
- [Premium Set (premium board, case, solid bits, problems 001-010)](https://than.gs/m/1063420?affiliateCode=MAKE)
- [Problems 011-015](https://than.gs/m/1063431?affiliateCode=MAKE)
- [Problems 016-020](https://than.gs/m/1063432?affiliateCode=MAKE)
- [Problems 021-025](https://than.gs/m/1063433?affiliateCode=MAKE)
- [Problems 026-030](https://than.gs/m/1063434?affiliateCode=MAKE)
- [Problems 031-035](https://than.gs/m/1063435?affiliateCode=MAKE)
- [Problems 036-040](https://than.gs/m/1063436?affiliateCode=MAKE)
- [Problems 041-045](https://than.gs/m/1063437?affiliateCode=MAKE)
- [Problems 046-050](https://than.gs/m/1063438?affiliateCode=MAKE)

---

This is _version 2.0_ of the game, with many exciting upgrades:
- All parts newly redesigned and 50 problems in total!
- The 'bits' have larger hinges that are stronger, easier to print, and fit into the problems more visibly. 
- The bits and problems can no longer be placed upside down by accident. 
- Everything was scaled up 120% so the bits are easy to pick up an manipulate by all hands big and small. 
- The problems have been redesigned to use less material but maintain the necessary rigidity
- I've moved the number labels to the front to make them much more clear. 
- I've rearranged some of the problems so the difficulty increases more progressively at first.
- Thanks to the brilliant solver program by [Darci Peoples](https://darcipeoples.com/), I've changed many of the problems to have fewer solutions, making certain problems significantly more challenging!
- The updated solution guide PDF is attached, including problems 001-050

[Watch my video about version 2.0](https://youtu.be/aLKqzI0Va5E)

---

**_Printing Guidelines_**
- bits : 0.16mm layer height, 2-3 walls, 0.4mm nozzle, 15% infill
- problems : 0.16-0.25mm layer height, 1 wall, 100% infill; *printing the first layer with one wall can help with bed adhesion of the number labels*
- board : 0.16mm layer height, 2-3 walls, 15% infill; *for better grid visibility swap filaments at 1.5mm layer height
- cover : _'wLogo'_ version is two parts. Print combined using a multicolor printer or using [Multipass Multicolor Printing](https://makeanything.design/multipass-multicolor/) technique for single extruders.
- board_premium : filament swap at 8.2mm height for better grid visibility. _'TPUgrip'_ can be glued to the bottom for a nonslip board, printed with TPU 95a or similar flexible filament. Use [E6000](https://amzn.to/3UIOdso) adhesive or similar.
- case : use _'size20'_  together with _'Sleeve_Wide'_ or _'size30'_ with _'Sleeve_Tall'_. Wide sleeve holds 21 or 20 problems with the Handle, Tall sleeve holds 27 or 26 problems with Handle. Handle can be used loose (slide in from the bottom of the sleeve) or glued into place.

---

**_Corrections_**
_May 20, 2024 - fixed problem 046_
_May 25, 2024 - fixed problem 012_

---

Photographed models were printed using PolyTerra Matte PLA [(US Link)](https://bit.ly/polyTerra) Also on [Amazon](https://amzn.to/3PHOxFA)

SKEWBITS v2.0 Puzzle Game // Full Set w. Problems 001-050

A nice general purpose cleaning brush and dust pan set to keep your place tidy! This large variation has a brush that is roughly 180 mm wide with 95 mm bristles. The dust pan is 215 mm wide.

**_Printing Guidelines_**

Printing the brush requires a well tuned printer and proper slicer settings to successfully create the long bristles using bridging. I suggest a 0.4mm nozzle and Classic rather than Arachne wall generator. Slow bridge speed, high cooling, and lower extrusion temperatures can all help get clean bridging. You may want to first print the smaller [Detail Dusting Brush](https://than.gs/m/1044850?affiliateCode=MAKE) to make sure your settings are appropriate before trying this larger print.

The handles should be fine with your default print settings. Six [6 mm x 3 mm neodymium disc magnets](https://ebay.to/3kMB1A4) can be [glued](https://amzn.to/44LMqVm) into the handles so they stick together for storage (make sure to get the magnet polarities right!)

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab Marble PLA and Purple ABS](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


Large Brush & Dust Pan

Large_Brush.stl

I made these mounted trash bag bins specifically for the Red/Green waste bags used in my region of Sweden, but you may find them useful for your own situations as well! I have mine mounted on the cabinet drawer under my kitchen sink for super convenient and accessible composting.

The design consists of four parts:
- A lid
- An inner rim that connects to the lid
- An outer rim that holds the trash bag and snaps onto the wall mount
- A beefy wall mount that securely clips onto the rim.

Default print settings should work out. I used PC filament to make the mount extremely resiliant but I suspect most filaments should be sufficient. The rest of my parts were printed with PLA. Share your results if you try something else!

The mount has holes for up to 6 wood screws, but I only used the top 4 and it's enough, even with short 19mm screws. The holes are sized for threads up to 4mm wide, but you should be able to expand the holes by pre-drilling if necessary.

**_July 18, 2025 Updates_**
- The lid and inner rim used to be a single print in place part, but this has proven to be unecessary. The parts are now split and you can flex the inner rim to snap the lid onto the hinge.
- Added a new **locking** lid! This upgraded lid snaps into the open position to stay up on its own.
- Looser version of the locking lid is also included. Useful for thicker trashbags or less precise printers.
- **note:** You **must** use the Locking Inner Rim together with the Locking Lid.
- **note:** The new Locking Inner rim requires **support material** generation turned on! It's a small amount of supports, but this enables the flap on the lid for easier handling.

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab Bambu Green PLA, Red PETG, and Clear PC filaments](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


Mounted Trash Bag Bin (Updated)

Lid.stl

Inner_Rim.stl

Inner_Rim_Locking.stl

Lid_Locking.stl

Inner_Rim_Locking_Loose.stl

This is a print-in-place super compact and convenient bowl frame that you can use for an instant bowl whenever needed.  To complete the bowl open the frame and line it with a dog poop bag or any other plastic bag.

Watch the video for a better understanding.

100% printed - no hardware, fasteners, or adhesives required.  No support is required.

See my blog for more information and details at… 
https://www.logicalplanet.com/

Designed for the following print settings:
Material = I recommend PETG but any material should work.  
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Infill = 40%

Commercial Licensing is available through my Thangs Memberships.


Make-A-Bowl Folding Dog Water Bowl

MAB-1v00.stl

The **PLEATS Collection** mimics beautiful origami pleats that are simple but impressive in their repetition.  PLEATS 001 is 149 mm tall with a 149 mm opening and a 100 mm base. It can be scaled up and down to suit your plant or another purpose.

This pot includes a drainage hole on the bottom for growing live plants and pairs well with my [200 mm Floating Drip Tray](https://than.gs/m/1027158?affiliateCode=MAKE) to allow for excess runoff.


**_Printing Guidelines_**

The **PLEATS** series of prints are designed to be printed in vase/spiral mode in your slicer. For full scale I suggest printing with a **0.8 mm nozzle width** (even with a 0.4mm nozzle) and 1.2mm of solid bottom layers. No top layers. 

For the 'wHole' version of the vase mode print, use the maximum number of solid bottom layers before the holes are covered to avoid interfering with the spiral printing. You can also print the version without holes and simply drill/cut your own drainage holes in the bottom after printing if you plan on growing live plants.

I've also included a 'Solid' version for standard printing, with 1mm thick walls. I've found the vase mode version to work well, but certain printers and situations may benefit from the solid version (eg. resin printing).

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Fillamentum PLA Extrafill Sky Blue and Signal Red](https://bit.ly/FM-xtra) (also at [MatterHackers](https://bit.ly/xtrafill)).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

Print-in-Place

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

SKEWBITS v2.0 Puzzle Game // Premium Set + Problems 001-010

Folding Scalpel Pocket Knife v2.1

Small Brush & Dust Pan

Programmable Combination Lock Gift Box

BendyBeast Articulated Dragon #Throwback

BevvySteady3 Beer/Drink Holster

Wine Stackers, 2-Bottle per Layer Version

Print-in-Place Folding Scalpel

Make-A-Bowl Folding Dog Water Bowl