plant branch holder

#MakerMadness

Use can use this tie to gentle guide your plant branches to where you want.
Don't over-tight the plant allow some slack for branch growth.
At only 0.46 grams per unit,  you can print 2170 with just one roll.
included fusion file for tweaking.

Print it in PETG for added flexibility or ASA for durability in direct sunlight. PLA works fine, although not too strong, 0,2mm layer

Low Poly Oddish

**Printing, Assembly & Post Processing**
					
**FDM or Resin:** Either (I've only printed FDM so far)	
**Scaling:** All Low Poly Pokemon are currently at the smallest scale I like to FDM print them at, but you can scale up or down in the slicer as you please and they should be fine.
**Supports:** None
**Nozzle Size I Used:** 0.6			
**Infill/Perimeters:** Your preference, but since they are decorative you would be good with very little.
**Layer Height:** I printed with 0.6 mm with no issues, any large might cause problems on the thinner parts.  

Post-Processing/Assembly:
None needed, but you can if you want.  I could see painting they eyes black might look nice.

**This design is uploaded with a non-commercial license. Purchasing this file does not grant you the rights to sell commercially.

If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://www.patreon.com/thinair3D				

Plantpot

Vertical Filament Spool Parts Drawer (OpenSCAD)

Another empty spool project! This design is vertical to support a larger number of small removable bins.

**Introduction**
[https://youtu.be/jEJRSixYPKs](https://youtu.be/jEJRSixYPKs)

**Stand**
[https://youtu.be/TCCuzT0m3fg](https://youtu.be/TCCuzT0m3fg)


**Printing and Installation Tips**
The stand is highly recommended since it holds bins in even if a lock fails.

Print one side of the stand first to make sure all the measurements are correct.

Not all bolt holes are required, but the stand will be more sturdy if you use all of them.

Try printing a few test locks to find the correct clearance value.


**How do I customize this?**
This is an OpenSCAD project. OpenSCAD is a script-based modeling software specifically created for projects like this that need to be customizable.

If you're new to the program, it may look strange at first, but most of the work is just typing values into a form or selecting customization options from a dropdown list. You do not need to know any programming or write a single line code to use OpenSCAD.

Once you've entered everything you need, you can export an STL file for printing. Here's a helpful video that walks through the entire process!


**Can I sell copies of this?**

Yes! This project was shared under the [Creative Commons - Attribution](https://creativecommons.org/licenses/by/4.0/) license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

[Click here for attribution examples](https://wiki.creativecommons.org/wiki/best_practices_for_attribution)tion examples

Vertical Filament Spool Parts Drawer

Heart pixelated - Kiss

A Heart pixelated to Valentine's Day!! 💘
Have you kissed someone today?

If you like my designs give a like and follow me. 😁

@LKFLand

Heart pixelated - Amor

A Heart pixelated to Valentine's Day!! 💘
Have you given "Amor" to someone today?

If you like my designs give a like and follow me. 😁

@LKFLand

Heart pixelated - Love

A Heart pixelated to Valentine's Day!! 💘
Have you given "Love" to someone today?

If you like my designs give a like and follow me. 😁

@LKFLand

Cylinder Planter w Drain

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
_____________________________________________

Cylinder Planter w Drain Holes

Hope you all enjoy.

_____________________________________________

If you print some of my models please tag me on social media.

www.Twitter.com/carmelo_nazario
www.instagram.com/thecreatorx3d

If you want to help a brother out please consider signing up to my patreon.

www.patreon.com/thecreatorx3d


lithophane Lampe Supernatural

box-wp6903526-supernatural-laptop-wallpapers.stl

Heart pixelated - I luv u

A Heart pixelated to Valentine's Day!! 💘
Have you said "I luv U" to someone special today?


If you like my designs give a like and follow me. 😁

@LKFLand



Heart pixelated - Eu te amo

A Heart pixelated to Valentine's Day!! 💘

If you like my designs give a like and follow me. 😁

@LKFLand

Goku Perfil 2D .stl

Goku Perfil  2D Frame
Goku Perfil 2D Quadro

Supports:
No

Resolution:
0.2

Infill:
10%

Notes:
Easy to print

Lion Ring

Heart of a Lion.stl

Wall hanging planter

Happy 420 Day Leaf

Happy 420 Day! 



Tag me on those awesome photo prints on twitter- https://twitter.com/carmelo_nazario

KEEP ON PRINTING!!

Macaco Thom v6.3mf

Versão 3MF do Macaco Thom com ajustes de fatiamento no Prusa Slicer já com mudança de cor no layer certo.
Lembrando, imprimir com 1 parede apenas._

Japanese Style Toy Vending Machine - Gashapon 

Gashapon (ガシャポン), also called gachapon (ガチャポン), are a variety of vending machine-dispensed capsule toys popular in Japan and elsewhere. Gashapon is onomatopoeic from the two sounds gasha (or gacha) for the hand-cranking action of a toy-vending machine, and pon for the toy capsule landing in the collection tray.

Mandala mini

Mandala mini.3mf

Akuma Fight Bust

Grock (Groot + The Rock Mashup)

**Grock**

Another mashup for fans of The Rock.

Remixed from:
1) https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson
&
2) https://www.thingiverse.com/thing:2840339

Size: 128 x 83 x 133 (Scale up or down as you please)

If you would like to support my work, or have access to all of my files you can consider my Patreon! I also tend to drop these models to my Patrons earlier than everywhere else.

patreon.com/thinair3D

Plant

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

plant branch holder

View 35 new models

Plantpot

View 20 new models

Heart pixelated - Kiss

Heart pixelated - Amor

Heart pixelated - Love

View 24 new models

lithophane Lampe Supernatural

Heart pixelated - I luv u

Heart pixelated - Eu te amo

View 11 new models

Lion Ring

Wall hanging planter

View 47 new models

Macaco Thom v6.3mf

Japanese Style Toy Vending Machine - Gashapon

Mandala mini

View 14 new models

Grock (Groot + The Rock Mashup)