Plant Self Watering Spikes Devices with Adjustable Release Control Valve for Home and Vacation Plant Watering
A simple way to keep your plants from dying when traveling. Easy to use, fill a standard soda bottle with water thread the water spike on, and insert it in a flower pot. You may need to experiment with hole size to get the best results, All plants need different moisture and water will be absorbed differently depending on the soil type used.


Nozzle diameter: 0.4 mm

Layer height: 0.2 mm (to balance detail and print time)

Infill density: 100% for durability and water-tightness

Print speed: 40 mms (slowed to 20 mm/s for fine details at the tip)

Bed temperature: 60 C

Nozzle temperature: 215 C

Important Note:

After printing, it is essential to clean the thread teeth for smooth movement and ease of assembly and disassembly:

Clean the thread teeth of the valve screw using an M10 nut.

Clean the internal thread of the valve using an M10 bolt to prevent the valve screw from breaking during installation.

This self-watering spike is highly functional and easy to print. I welcome your feedback or any questions about the printing process

Plant Self Watering Spikes

cone .STL

This beautifully designed vase series mimic an inflated pillow or balloon. Each shows of the small details of movement that would look beautiful as decor on your desk at work or your table at home. They would make an excellent gift or personal pen holder. 

Make sure to check out the other vases in this collection! 
**Private Use Only.
Become a Maker Member for unlimited downloads or become a MERCHANT MEMBER for commercial use. **
Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!

Pillow Vase / Planter Mod 2

pillow vase2.stl

This large pot is the first in my **VESUVIUS Collection**, which features dense herringbone ribs to increase strength while creating a dramatic form.

VESUVIUS 001 is 250 mm tall and 250 mm in diameter at the top. The bottom footprint has a 190 mm footprint. This was designed for use with my [250 mm Floating Drip Tray](https://than.gs/m/1027171?affiliateCode=MAKE) to catch excess water runoff.

**_Printing Guidelines_**

The **VESUVIUS** series of prints are designed to be printed in vase/spiral mode in your slicer. For full scale I suggest printing with a **1 mm nozzle width** (even with a 0.4mm nozzle) and 1.6mm of solid bottom layers. No top layers. **Make sure your slicer is not set to close small gaps.** In BambuStudio I set the _'Slice gap closing radius'_ to 0 mm

For the 'wHole' version of the vase mode print, use the maximum number of solid bottom layers before the holes are covered to avoid interfering with the spiral printing. You can also print the version without holes and simply drill/cut your own drainage holes in the bottom after printing if you plan on growing live plants.

I've also included a 'Solid' version for standard printing, with roughly 3mm thick walls. This will be extra strong, but uses much more material, and I've found the 1mm vase mode version to be sufficient, even at this large size.

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA Basic Gradient (Solar Breeze)](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

VESUVIUS Pot 001 // Large Vase Mode Planter

VESUVIUS_001_Solid.stl

VESUVIUS_001_1mmVasemode_wHoles.stl

VESUVIUS_001_Solid_wHoles.stl

The updated ITALIC V2 is an eccentric watering can featuring a playful skewed profile. The original ITALIC has been refined for improved functionality whilst maintaining the iconic shape.


**_Printing Guidelines_**

The walls of this container are 1.2 mm thick, and only the handle portion is solid. I suggest printing with a high wall count (5+) to ensure that the thin handle won't snap off.  You also need to ensure that your printer can create watertight models, otherwise this won't be quite as useful.

My settings:
- 0.16 mm layer height
-5 perimeters
- 20% Gyroid infill
- 10mm brim (or use the 'wBrim' version)

Download includes a 'wBrim' version with minimal supports since the handle is unsupported for much of the print, as well as a version of just the watering can. I managed printing the unsupported version with a 10mm brim, using ASA.


---

Photographed model was printed using [QIDI ASA Green](https://qidi3d.com/products/qidi-asa-filament?variant=41725687496844&sca_ref=6089281.BQS8d0sJuF) ([Amazon](https://amzn.to/3HK5pK6)) on the [Qidi Plus4 3D Printer](https://qidi3d.com/products/plus4-3d-printer?sca_ref=6089281.BQS8d0sJuF) (Also [on Amazon](https://amzn.to/4jON7VK)). 

ITALIC V2 Watering Can

ITALIC_V2_wBrim.stl

I designed this little UFO as a playful way to display small plants or dried flowers (but really, it works for just about anything. Crystals, keepsakes, tiny trinkets, or weird little guys) anything you want to give a moment in the spotlight. It’s part vase, part planter, part display stand, and just the right amount of out there.

**This design works with both AMS and non-AMS printers, it's flexible and easy to assemble!**

**Print settings for the vessel if using it as a planter:**
- Suggest a brim
- No support needed
- 15% infill
- 4 walls
- Top shell: 7 layers
- Bottom shell: 7 layers
- 0.4mm nozzle
- 0.2mm layer height

**Print settings for transparent parts like the windows:**
- Suggest a brim
- No support needed
- 100% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height

**Print settings for everything else:**
- Suggest a brim
- Support needed for bottom of ship
- 15% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height

**Use 3MF file if you want to see the printing orientations**

**PLA Used:**
- Transparent Neon: https://www.matterhackers.com/store/l/pro-series-pla/sk/MRP7Y07L?aff=7646
- Vivid Tangerine: https://amzn.to/42Towtk
- Transparent Blue: https://www.matterhackers.com/store/l/pro-series-pla/sk/M3PUVADS?aff=7646
- Sage Green: https://www.hatchbox3d.com/products/hb-pla-1kg1-75-sgrn

**Assembly:** https://youtu.be/_-W_iHPZOhE



Kitsch UFO Vase – Retro Planter for Dried Flowers, Crystals, Trinkets | Quirky Sci-Fi Home Decor

pixelandpapier__ufo_vessel__window_trim.stl

**Phoney Cactus**

I designed this Moon Cactus Phone Stand in collaboration with [ForgeCore](thangs.com/forgecore)

**Did You know?**
The Moon Cactus isn't actually a real cactus. It is actually two cactuses that get cut and grafted together by humans. And since that sounds very unnatural, we decided to play into the unnaturalness by turning it into a mechanical phone stand.

You turn the cactus into a phone stand by lifting it out of the dirt, and untwisting in a satisfying motion! That way you can always have a phone stand where you need it without having something ugly sitting on your table / desk.

The model is assembled with 4 screws. We wanted to make it fully 3D printable but the screws make it feel way more secure and strong than the purely 3D printed version.

Print the top "flower" (Scion) with any color of your choosing!

**Suggested Filaments:**
[Stem Color](https://amzn.to/3SXyrZG)
[Yellow Color](https://amzn.to/4cFCRLN)
[White Color](https://amzn.to/3AyXls5)
[Pot Color](https://amzn.to/4dSWu3H)
[Dirt Color](https://amzn.to/3yNtmfB)

**Supplies:**
[M3 x 25mm bolts](https://amzn.to/3YRExhT)

*Jankmart may earn affiliate commission from the links above

Phoney Cactus - Moon Cactus Phone Stand

1 - Easy Print 3mf - Moon Cactus Phone Stand.3mf

[_**V2 is now available HERE**_](https://than.gs/m/1377006?affiliateCode=MAKE)

ITALIC is an eccentric watering can featuring a playful skewed profile. The enclosed container is filled through an opening in the top of the handle, which can also be covered with your thumb while pouring to regulate flow. Like any good fancy designer product, it's slightly awkward to hold. How will you pick it up? :P

**_Printing Guidelines_**

The walls of this container are 1.2 mm thick, and only the handle portion is solid. I suggest printing with a high wall count (5+) to ensure that the thin handle won't snap off.  You also need to ensure that your printer can create watertight models, otherwise this won't be quite as useful. I used default print settings on my Bambu Lab X1-Carbon with ABS and it worked out!

Download includes a version with minimal supports since the handle is unsupported for much of the print, as well as a version of just the watering can. In either case, I would suggest a substantial brim to help with bed adhesion. 

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab Mint ABS](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


ITALIC (V1) Watering Can

ITALIC_can_supported.stl

This planter, specifically crafted for indoor plants, can be printed in any color to complement your decoration. 
It has a hidden saucer (water dropper) that can easily be removed. All parts are printed in one go. 
Doesn't need supports  in printing and can be scaled. The design lends itself well to being printed itself well to being printed with PLA. 

Should you encounter any difficulties, don't hesitate to reach out via message - support is just a click away. 
Visit thangs.com for detailed visuals of this masterpiece, available in our "3D Printers/All" category. 

**Printing details: **

Print in place
Scalable
No support needed
Best with PLA

If you have any problem with this, message me anytime.

Planter - THE LATTICE

vase x v1.stl

Pillow Vase Mod 4

This beautifully designed vase series mimic an inflated pillow or balloon. Each shows of the small details of movement that would look beautiful as decor on your desk at work or your table at home. They would make an excellent gift or personal pen holder. 

Make sure to check out the other vases in this collection! 

Private Use Only.
Become a **Maker Member** for unlimited downloads or become a **MERCHANT MEMBER** for commercial use. 

Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!


Pillow Vase Mod 4

Pillow Vase 4.stl

Pillow Vase Mod 1

This beautifully designed vase series mimic an inflated pillow or balloon. Each shows of the small details of movement that would look beautiful as decor on your desk at work or your table at home. They would make an excellent gift or personal pen holder. 

Make sure to check out the other vases in this collection! 
**Private Use Only.
Become a Maker Member for unlimited downloads or become a MERCHANT MEMBER for commercial use. **
Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!

Pillow Vase / Planter Mod 1

pillow vase.stl

This latest addition to the **VESUVIUS Collection**, is a small cylindrical pot/container featuring the same dense herringbone ribs that increase part strength while creating a dramatic form.

VESUVIUS 003 is 50 mm tall and 94 mm in diameter. This was designed for use with my [140 mm Floating Drip Tray](https://than.gs/m/1036823?affiliateCode=MAKE) to catch excess water runoff.

**_Printing Guidelines_**

The **VESUVIUS** series of prints are designed to be printed in vase/spiral mode in your slicer. For full scale I suggest printing VESUVIUS 003 with a **0.8 mm nozzle width** (even with a 0.4mm nozzle) and 1.2mm of solid bottom layers. No top layers. **Make sure your slicer is not set to close small gaps.** In BambuStudio I set the _'Slice gap closing radius'_ to 0 mm

For the 'wHole' version of the vase mode print, use the maximum number of solid bottom layers before the holes are covered to avoid interfering with the spiral printing. You can also print the version without holes and simply drill/cut your own drainage holes in the bottom after printing if you plan on growing live plants.

I've also included a 'Solid' version for standard printing, with roughly 1.2mm thick walls. This will be extra strong, but uses much more material, and I've found the vase mode version to be preferable.

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Fillamentum PLA Extrafill Sky Blue and Signal Red](https://bit.ly/FM-xtra) (also at [MatterHackers](https://bit.ly/xtrafill)).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

VESUVIUS Pot 003 // Small Cylinder Vase Mode Planter

VESUVIUS_003_1.2mmSolid_wHoles.stl

7 years after releasing my most popular 3D model, here is the newly redesigned KROMATIK vase! This version has been refined for cleaner printing and overall finesse.

The KROMATIK Collection features sweeping angular channels that capture the surrounding light, shadow, and colors in a striking manner. This reflection grounds the pieces within their environment while their dramatic forms make them stand out.

KROMATIK 002 was designed for printing in 'vase mode'. When printing at 100% scale I recommend a 0.8 mm extrusion width and 5-10 solid bottom layers for a strong and watertight model. Of course you're always encouraged to experiment with scale and settings... you may discover something special! 

There is also a hollowed version with 1.2 mm wall thickness for standard printing.

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA Marble filament](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_1. 

KROMATIK Vase 002

KROMATIK_002_vase.stl

The **PLEATS Collection** mimics beautiful origami pleats that are simple but impressive in their repetition.  PLEATS 001 is 149 mm tall with a 149 mm opening and a 100 mm base. It can be scaled up and down to suit your plant or another purpose.

This pot includes a drainage hole on the bottom for growing live plants and pairs well with my [200 mm Floating Drip Tray](https://than.gs/m/1027158?affiliateCode=MAKE) to allow for excess runoff.


**_Printing Guidelines_**

The **PLEATS** series of prints are designed to be printed in vase/spiral mode in your slicer. For full scale I suggest printing with a **0.8 mm nozzle width** (even with a 0.4mm nozzle) and 1.2mm of solid bottom layers. No top layers. 

For the 'wHole' version of the vase mode print, use the maximum number of solid bottom layers before the holes are covered to avoid interfering with the spiral printing. You can also print the version without holes and simply drill/cut your own drainage holes in the bottom after printing if you plan on growing live plants.

I've also included a 'Solid' version for standard printing, with 1mm thick walls. I've found the vase mode version to work well, but certain printers and situations may benefit from the solid version (eg. resin printing).

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Fillamentum PLA Extrafill Sky Blue and Signal Red](https://bit.ly/FM-xtra) (also at [MatterHackers](https://bit.ly/xtrafill)).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

PLEATS Pot 001

PLEATS_001_wHoles.stl

A set of 47 terrain models for your forest adventures!
*Includes PDF 40x90cm Forest maps

Forest Set (Pre-Supported)

ShortTree_B_Complete.stl

Three sizes of spiky sea urchin shells. Careful, they’re sharp!

See here for video: https://youtu.be/2FuPJwsSXlM 


These high-resolution models are designed for resin printing. Walls are 1mm thick, so the prints require minimal material and can be translucent depending on the type of resin used. 

Other Sea Urchin Designs:
Bumpy: https://than.gs/m/929027 


Plant

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Plant Self Watering Spikes

Pillow Vase / Planter Mod 2

VESUVIUS Pot 001 // Large Vase Mode Planter

ITALIC V2 Watering Can

Kitsch UFO Vase – Retro Planter for Dried Flowers, Crystals, Trinkets | Quirky Sci-Fi Home Decor

Phoney Cactus - Moon Cactus Phone Stand

Planter - THE LATTICE

Pillow Vase Mod 4

Pillow Vase / Planter Mod 1

Forest Set (Pre-Supported)

Sea Urchin Shells (Spiky)