Goku Mobile Stand

3D Print Mobile Stand with Goku's Character
Easy to Print

Print and Share image with us
Good Day

Vader vs Skywalker in The Empire Strikes Back Bookends

Darth Vader Bookend Frikarte3D.stl

Han Solo in Carbonite Bookends

carbonite bookend.stl

Blank Sign - Do your own design on it!

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared.
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings -
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No



Portable Monitor Holder

75 degrees

BackPack Hook Under Desk Reinforced

This is a backpack hook that you can screw under the desk. It has 4 screw and should support laptop backpacks.

Infinity Mirror Stand (LED Light Up)

Show off your infinity Mirror in style!
This is a stand for an Infinity Mirror built with a 12x12" shadow box.  There are a ton of builds out there for Infinity Mirrors.  If you would like me to do one on how I made mine drop a request on the guestbook here https://withkoji.com/@MakersMashup/y82g

This uses silicone LED Neon strips (One on each side) and then hooks to a standard LED controller.  Here is one you can build yourself: https://thangs.com/designer/Makers%20Mashup/3d-model/ElectroCookie%20Enclosure%20for%20WLED%20Projects-760374?manualModelView=true&source=Recent


Was this model helpful for you? Consider supporting my work in any of the following ways!  Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or
consider supporting my ongoing work https://www.patreon.com/makersmashup
Purchase anything on amazon after visiting our store page https://amzn.to/429HusI  Just click this link first!

No cost option to support my work?

- Subscribe to the YT channel
- Follow me on Thangs.com
- Watch videos on the channel!
- Share any of the videos on social media!
- Share my models with friends and family!



FHW: Set size blank

this is the blank slackers..
Cheers
Maker

$5.00 Display sign

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No


$15.00 display sign

$20.00 Display sign

$10.00 Display sign

$30.00 Display sign

$25.00 Display sign

$40.00 Display sign

RTK-Sign40dollar.stl

$50.00 Display sign

Be cautious of your bed placement, I had this over the purge line! (oopsie daisies)

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No


$45.00 Display sign

Laptop Mockup

This is a futuristic laptop mockup for any project you would need this for. I work hard on these designs, so if you like my designs, a follow would be very helpful.

Credit Card Tray 

CardTray-tile-tray.stl

mophie wireless charger/phone stand

I felt it was inconvenient to pick up my phone and take it off the charger to check my notifications. This allows you to have your phone charging and still be able to look at it.

I printed it at 10% infill and pla and its extremely sturdy, you likely could get away with a lower infill

This is also the second thing I have ever modeled

Personal computer

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Goku Mobile Stand

Vader vs Skywalker in The Empire Strikes Back Bookends

Han Solo in Carbonite Bookends

Blank Sign - Do your own design on it!

Portable Monitor Holder

BackPack Hook Under Desk Reinforced

Infinity Mirror Stand (LED Light Up)

FHW: Set size blank

$5.00 Display sign

$15.00 display sign

$20.00 Display sign

$10.00 Display sign

$30.00 Display sign

$25.00 Display sign

$40.00 Display sign

$50.00 Display sign

$45.00 Display sign

Laptop Mockup

Credit Card Tray

mophie wireless charger/phone stand