Wildlife Ornaments

Cougar Ornament.stl

Lil' Kimono Girls | Holiday Ornament

GirlsLoop.stl

Lil' Luck Cat | Holiday Ornament

LuckCatLoop.stl

Twist Tree.stl

This tree decoration has captive print-in-place ornaments. Once printed they twist loose and rotate freely within the boughs of the tree. 

See here for video: https://youtu.be/iUhaGNJOFGk 

This design is particularly suited to printing with multicolour filament as rotating the ornaments allows for visualization of the different filament colours.

This model features the tricolour “Silk Red & Green & Blue” filament by Eryone.

This is an advanced print requiring a well calibrated machine and quality filament. Good layer adhesion is important.

Print the tree upside-down with the top portion fully supported. 

Once printed, allow the print to cool. Wiggle each ornament back and forth until it breaks from the small internal supports.  Twist it a few times until it turns smoothly.

If an ornament does break off while twisting it loose, you can just glue it back in place.


Death star Christmas ornament.3mf

Hello! I just wanna wish everyone a Merry Christmas and a early Happy new year! And may the force be with you!! 

Slice the death star and glue it together or just print it in one piece! 

Full Color Santa Christmas Ornament

Full Color Santa Ornament

Christmas candy

You can scale it up or down , you can check more of my designs on my instagram https://www.instagram.com/emx_performance/

Snow Globe Votive Ornament - Winter Cabin

Snow Globe Votive Ornament - Winter Cabin

Insert an LED votive candle in the base to light up the cabin.

Print in place with no supports needed. Brim build plate support recommended.

Creative Commons License BY-NC-ND 4.0

Dropspindle Starburst Ornament

Downspindle Recessed Ornament. No Flange Edge.

Creative Commons License BY-NC-ND 4.0

Downspindle No Flange Starburst Ornament

Ball Ornament

Vintage retro Christmas ball ornament.

Creative Commons BY-NC-ND 4.0

Spindle Ornament

RetroMaker Spindle Ornament

Creative Commons License BY-NC-ND 4.0

RetroMaker Spindle Ornament

Icicle Ornament

RetroMaker Icicle Ornament

Creative Commons License BY-NC-ND 4.0

RetroMaker Icicle Ornament

Recessed Ball Ornament

RetroMaker Recessed Ball Ornament.

Creative Commons License BY-NC-ND 4.0

RetroMaker Recessed Ball Ornament

Recessed Icicle Ornament

RetroMaker Recessed Icicle Ornament.


Creative Commons License BY-NC-ND 4.0

RetroMaker Recessed Icicle Ornament

Recessed Spindle Ornament

Vintage Retro Inspired Spindle Christmas Ornament with Starburst Indent.

Prints standing straight up with a 50% build plate only support.

Creative Commons License BY-NC-ND 4.0

RetroMaker Recessed Spindle Ornament

Biblically Accurate Angel ornament 

Need the burning passions of heaven on your yuletide tree? Need more eyes on an ornament than normal, this ornament is for you!

Print flat with no supports. Should be an easy print!

Holiday Tree Display Stand | Modular

StarTopper.stl

Star Christmas Tree Ornament

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**WHAT IS IT?**
This is a fun Christmas tree ornament that would also make a fun suncatcher if it's printed with transparent filament. It's reminiscent of a cross, a star (it actually has 8 points), classical western architecture, and more. Using my settings, it's a nice weight at 100% and extremely light at 75% and smaller.

**EASY PRINT**
If you use my settings, you shouldn't have any problems getting this to print. If you print this with your printer's default settings, you'll get a paperweight with a mushy top.

**RESIZING**
At 100%, the ornament is a nice size for larger trees – especially for the base of the tree where you'd expect larger ornaments. However, you can scale this down to 50% and still get nice prints. At that size, the ornament looks good on miniature trees. I haven't tried printing it larger than 100%.

**PRINT TIME**
With my settings, it will take about 4.5 hours to print at 100% scale. At 50%, it takes a little over an hour.

**COLOR-CHANGE PLA**
I used TTYT3D's quick color change PLA. If you print one ornament with it at 100% with it, you'll get a subtle color change. For a more dramatic change, like in the size comparison photo, print several ornaments at once. To go all the way from gold to blue, you'll need the estimated print weight to be at least 75 grams (4 ornaments at 100%).

**HOW DO YOU HANG IT?**
I've concealed attachment points one the back of one of the points of the star. Just tie a piece of coat thread to them to create a loop.

**PRINT SETTINGS**
You'll generally want to print this at the lower end of your PLA's temperature range. I print TTYT3D PLA at 180 degrees, which is well below their recommended temperature. Maybe my printer just runs hot, but that temp prints more accurately with less stringing.

*Thickness*

* Layer thickness: .15mm
* Wall thickness: 0.4mm and choose the “alternate extra wall” option so it alternates between 0.4 and 0.8mm walls with each layer (if you're using Cura – other slicers may not have this option). The alternate extra wall seems to prevent gaps in the print while minimizing the overall weight of the ornament. If you print below 75% scale, I suggest printing at 0.4mm without the alternate extra wall. I would also print without the alternate extra layer if you're using transparent filament.
* Top/bottom thickness: 2 layers for opaque filament, 1 for transparent filament
* Initial bottom thickness: 3 layers

*Infill*
This doesn't need any infill. Seriously.

*Speed*
You'll want to use slow printer settings to that the print is accurate and to reduce the pull on the thin arms of the topper.

* Overall: 60mm/s
* Outer wall: 40mm/s
* Inner wall: 50mm/s
* Travel Speed: 100mm/sec

*Build Plate Adhesion*
I printed with just a skirt and it worked well every time. If you have difficulty getting the details of the first layer to adhere to your bed, try adding a raft.

*Supports*
I added supports to get the outer points of the ornament to print better, but you can do without them. The supports I added made little difference in print time or the amount of filament used. I found that adding supports on the side with the attachment points (for strings) was problematic (attachment points broke before supports separated) and unnecessary (model printed fine without the supports). So, I added a support blocker to that corner. Support settings:

* Placement: touching Buildplate
* Overhang: 69 degrees
* Pattern: Lines
* Density: 12%
* Enable Support Brim: Yes
* Brim Width: 4mm

*Common Problems*
* Uneven print: Reduce print speed or try scaling the print up in the Z dimension only. Scaling disproportionately may impact how the ornament hangs.
* Mushy print: Reduce print temp, increase cooling, or print more than one ornament at a time. 

RetroMaker Wedge House #1 Ornament

Check out the hanging ornament version to hang on your Christmas tree and decorate as you like for the holidays! 

Miniature wedge house for the neighborhood or garden, any crack will do.

Print on its long narrow side attached to the build plate. Recommend an 8mm brim and supports if needed. 

Creative Commons License BY-NC-ND 4.0

Batman Kevin Conroy Lithophane Ornament

I made this 100mm in diameter lithophane in memory of Kevin Conroy. 

This was one of the last photos that Kevin posted on his Twitter account, I couldn't imagine a better representation and now it's in ornament form for the world to appreciate and share.

I grew up watching all of his Batman cartoons, he was THE Batman to me, it's a darker world without him in it. 

Ornament

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Wildlife Ornaments

Lil' Kimono Girls | Holiday Ornament

Lil' Luck Cat | Holiday Ornament

Twist Tree.stl

Death star Christmas ornament.3mf

Full Color Santa Christmas Ornament

Christmas candy

Snow Globe Votive Ornament - Winter Cabin

Dropspindle Starburst Ornament

Ball Ornament

Spindle Ornament

Icicle Ornament

Recessed Ball Ornament

Recessed Icicle Ornament

Recessed Spindle Ornament

Biblically Accurate Angel ornament

Holiday Tree Display Stand | Modular

Star Christmas Tree Ornament

RetroMaker Wedge House #1 Ornament

View 31 new models