Parametric Reloading Tray

Reloading Tray.stl

Multiboard OpenSCAD generator

Example.stl

Divided Gridfinity Boxes (CadQuery Customizable)

divided box 1x4x3-hi and 1x3-divs.stl

Gridfinity Spacer Generator

Gridfinity Spacer Plate 5x4.3mf

Vertical Filament Spool Parts Drawer (OpenSCAD)

Another empty spool project! This design is vertical to support a larger number of small removable bins.

**Introduction**
[https://youtu.be/jEJRSixYPKs](https://youtu.be/jEJRSixYPKs)

**Stand**
[https://youtu.be/TCCuzT0m3fg](https://youtu.be/TCCuzT0m3fg)


**Printing and Installation Tips**
The stand is highly recommended since it holds bins in even if a lock fails.

Print one side of the stand first to make sure all the measurements are correct.

Not all bolt holes are required, but the stand will be more sturdy if you use all of them.

Try printing a few test locks to find the correct clearance value.


**How do I customize this?**
This is an OpenSCAD project. OpenSCAD is a script-based modeling software specifically created for projects like this that need to be customizable.

If you're new to the program, it may look strange at first, but most of the work is just typing values into a form or selecting customization options from a dropdown list. You do not need to know any programming or write a single line code to use OpenSCAD.

Once you've entered everything you need, you can export an STL file for printing. Here's a helpful video that walks through the entire process!


**Can I sell copies of this?**

Yes! This project was shared under the [Creative Commons - Attribution](https://creativecommons.org/licenses/by/4.0/) license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

[Click here for attribution examples](https://wiki.creativecommons.org/wiki/best_practices_for_attribution)tion examples

Vertical Filament Spool Parts Drawer

Cuboid Slide Fidget

RectSlide12mm4x4Snug.3mf

Parametric Bobblehead Springs

Spring - Half Coils Same Height.stl

Support-less Weighted Gridfinity Baseplates (CadQuery Customizable)

inverted weighted grid 1x3.stl

Parametric Hanging Clip

hanging_clip_20x20_1mm.stl

Customizable Rolodex - Works with Filament Swatch System

This customizable Rolodex works with both regular Rolodex cards as well as [filament swatches](https://thangs.com/mythangs/file/53640)!
 
**Introduction**
[https://youtu.be/YvJMhSLk8PI](https://youtu.be/YvJMhSLk8PI)

**Swatches**
[https://youtu.be/Cnv59R2LXv0](https://youtu.be/Cnv59R2LXv0)


**Fonts**

Openscad can use almost any font installed on your computer!

Select Font List from the Help menu.
Copy the font you want into the appropriate field (remove any surrounding double quotes)

By default, the file uses the Liberation Sans font which comes with OpenScad.


**Customization Options**

Parts
Which parts to print.

Display Duplicates
Select "Display Duplicates" to see all stand parts.

Swatch Width
Width of largest swatch or card stored on this stand.

Swatch Height
Height of largest swatch or card stored on this stand.

Swatch Preview
Include a preview of swatches on this stand. Disable this on export.

Axle Tolerance
Space between axle and tightly fitting parts.

Axle Guide Peg Holes
Add guide peg holes to axle.

Stand Thickness
Thickness of all stand parts.

Stand Tolerance
Space between stand parts.

Stand Text
Text to display on the stand.

Stand Text Font
Font to display stand text in.

Wheel Diameter
Diameter of wheel that holds swatches. Use a smaller diameter for few swatches and increase as needed.


**Can I sell copies of this?**

Yes! This project was shared under the [Creative Commons - Attribution](https://creativecommons.org/licenses/by/4.0/) license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

[Click here for attribution examples](https://wiki.creativecommons.org/wiki/best_practices_for_attribution)

Filament Spool [Openscad]

spool_top.stl

Gridfinity Avery Glue Stic

Zack's glue stick holders were either too large or too small. This one is just right for the Avery Glue Stic.

Source is at https://github.com/vector76/gridfinity_openscad

Customizable bases for fully 3D printed bobbleheads.

Example - All.stl

Gridfinity FLSUN Q5

Attach one or two of these to the top and/or left of your FLSUN Q5, print a few storage bins, and you can keep your tools close to your printer.

Source is at https://github.com/vector76/gridfinity_openscad

Spring Generator [ Serpentine / Zig-Zag / Sinuous ]

Serpentine_Example1.stl

Brick Block Box (OpenSCAD)

Demo Blocks.3mf

Tube-O-Dice: Portalbe dice tower

Tube-O-Dice - All Parts - 28mm.stl

Calendar Ring (OpenSCAD)

A small customizable ring you can add to medication bottles to track your last dose or other information.

**Introduction**
[https://youtu.be/MZRr8Ps7F6I
](https://youtu.be/MZRr8Ps7F6I)


**Customization Options**

Bottle_Diameter
Diameter of bottle ring will fit.

Click_Count
Number of positions outer ring can click into.

Tolerance
Space between rings.

Label_Height
Height of label area.

Label_Text_size
Text size for labels around the ring.

Label_Text_Style
Embossed or Inset

Label_Count
Number of labels around ring.

Split_Inner_Ring
Split inner ring for easier install.

Split_Outer_Ring
Split outerClick_Count ring for easier install.


**How do I customize this?**
This is an OpenSCAD project. OpenSCAD is a script-based modeling software specifically created for projects like this that need to be customizable.

If you're new to the program, it may look strange at first, but most of the work is just typing values into a form or selecting customization options from a dropdown list. You do not need to know any programming or write a single line code to use OpenSCAD.

Once you've entered everything you need, you can export an STL file for printing. [Here's a helpful video that walks through the entire process](https://www.youtube.com/watch?v=cBesMfP7Ddo)!


**Can I sell copies of this?**

Yes! This project was shared under the [Creative Commons - Attribution](https://creativecommons.org/licenses/by/4.0/) license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

[Click here for attribution examples](https://wiki.creativecommons.org/wiki/best_practices_for_attribution)tion examples

Calendar Ring

gridfinity flsun-q5 bedlevel.stl

Don't know where to put your bedlevel sensor for your FLSUN Q5? Print this out, along with my flsun-q5 grid, and put it there.

Parametric phone stand

phone-stand-11mm.stl

OpenSCAD

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Parametric Reloading Tray

Multiboard OpenSCAD generator

Divided Gridfinity Boxes (CadQuery Customizable)

Gridfinity Spacer Generator

Vertical Filament Spool Parts Drawer (OpenSCAD)

Cuboid Slide Fidget

Parametric Bobblehead Springs

Support-less Weighted Gridfinity Baseplates (CadQuery Customizable)

Parametric Hanging Clip

Customizable Rolodex - Works with Filament Swatch System

Filament Spool [Openscad]

Gridfinity Avery Glue Stic

Customizable bases for fully 3D printed bobbleheads.

Gridfinity FLSUN Q5

Spring Generator [ Serpentine / Zig-Zag / Sinuous ]

Brick Block Box (OpenSCAD)

Tube-O-Dice: Portalbe dice tower

Calendar Ring (OpenSCAD)

gridfinity flsun-q5 bedlevel.stl

Parametric phone stand