Parametric Hanging Clip

hanging_clip_20x20_1mm.stl

The Saucebox!  "THING!"

The Thing!

COMMERCIAL LICENSE - With your active support to Rytek through this Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires. 

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PETG/PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: Yes- Heavy tree Supports
Brim: No
Raft: N0
Skirt: No



RTK-Saucebox-Thing.stl

Rock climbing gear organizer for Carabiners friends

Model of Super Helpful Rock Climbing Organizer for equipment

Rock climbing gear organizer Carabiner

Hexagon Organizer Stackable Upgrade

HexagonOrganizerUpgrade(Trim).stl

 Micro SD Card Case with 6 slots 

Micro SD Card Case - Bottom.stl

USB holder with 4 slots

A simple and easy-to-print USB stick holder with four slots and rounded corners.

Size: 6.5 x 3 x 2.5 cm
Print time: 1 - 2 hours
Weight: 15 - 25 grams

Print settings: 

0.4 mm nozzle
0.3 mm layer height
Infill 10% 
Speed: 35 - 45 mm/s
No supports

Desk Organiser (Organizer) 

Desk Organiser 1.1.stl

Modular Vertical Organizer / Plant Nursery

Pot.stl

Coffin Shaped Box (Skull)

Coffin Shaped Box_Skull (for 2 colors).stl

Coffin Shaped Box (Cross)

Coffin Shaped Box_Cross (for 2 colors).stl

Henry Hoover Hose Accessory Collection

blank clip.step

Spinning makeup organizer

20230805-spinning organizer.stl

Snap Fit Box Blank 50x100x50mm

Print-in-place snap fit box
50x100x50mm(outer measurement)
Feel free to remix this blank box!

Prints great at 0.16mm layer height
No supports required

Do you want to kickstart your very own 3D printing business? Become a Member on my Thangs page to receive the right to sell any of my 3D printed models in your own store!

Gridfinity Mitsubishi Uni Lead Pack Holder

This is a Gridfinity 1x4 holder for Mitsubishi Uni drop pencil lead packs. The fitment is quite tight to allow for magnetic mounting to an angled surface like a drafting table.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax 

Gridfinity Mitsubishi Uni Drop Pencil Holder

This is a Gridfinity 1x4 that can hold 4 Mitsubishi Uni drop pencils. It also has a small slot above the pencils that will tightly grasp Hi-Polymer erasers.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax

Cup of holding! Print in place!

easy and simple desk print, perfect for a gift, decoration, or shop item! Free as always for the first week and then members only. 

please drop a like & follow to keep weekly free models coming!

To sell physical prints subscribe to thangs memberships!

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

ORGANIZER

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Parametric Hanging Clip

The Saucebox! "THING!"

Rock climbing gear organizer for Carabiners friends

View 48 new models

Micro SD Card Case with 6 slots

USB holder with 4 slots

Desk Organiser (Organizer)

Modular Vertical Organizer / Plant Nursery

Coffin Shaped Box (Skull)

Coffin Shaped Box (Cross)

View 24 new models

Spinning makeup organizer

Snap Fit Box Blank 50x100x50mm

Gridfinity Mitsubishi Uni Lead Pack Holder

Gridfinity Mitsubishi Uni Drop Pencil Holder

Cup of holding! Print in place!

EZPZ Pegboard Hook // 20mm Hook Type B

EZPZ Pegboard Hook // 10mm Hook Type B

desk top trash can

Smaller parts bins for SortMaster STS14027