Round Screw with Indentation for Desk Grommet System

This is a SCREW option for the Desk Grommet System. It has a circle-shaped top, with an indentation on the underside to fit around your existing desk grommet -- this allows the screw to fit better on your desk, eliminating the gap.

Watch this quick [demo of the Desk Grommet System](https://youtube.com/shorts/RZddovdPTco?si=oSV39VUzHwLAmyjV)

Compatible with the hex nut from:
[Base Screw & Nut for Desk Grommet System](https://than.gs/m/924318)

Search for "Desk Grommet System" for compatible lids and other parts.

**Here are a few:**
- Hexagon Lid (6-pointed): https://than.gs/m/924375
- Round Lid (3-pointed): https://than.gs/m/924380
- "K" Monogram Lid: https://than.gs/m/924378

Like this? Follow me! 💖 _thanks!_

X-wing Battery Holder

Small desktop battery holder shaped like an X-wing. Keep up to 11 batteries handy in this Star Wars inspired holder. 

Keep up to 4 - AAA, 4 - AA, 2 - C, & 1 - 9 Volt battery handy on your desk with this X-wing battery holder.

Should print on its back without supports.

3D Design Checklist - Model like a PRO!

Checklist_Board_V2.step

Pencil Pencil Holder

Pencil Pencil Holder Top.STL

Cylinder based pencil holder

This is a simple cylinder based pencil holder. It's good for holding things like pencils, pens or tools for 3D printing. It has a height of 90mm (3.5") and a diameter 65mm (2.5") along with having rounded edges. This is one of my first models so any feedback would be nice :)
Also the files are called V2 because I made some previous attempts.

Six Cable Holder.STL

This is a simple cable holder for 6 cables. Pushing the cables is a bit tight but they fight quite smugly. The total length is around 76mm (3"), the width that cables go in is 7.8mm (0.3") and the corridor that the cable goes through is around 2.7mm (0.1"). This model is similar to other ones I have seen on the database but I made this model from scratch. Attached is the gcode that uses the adaptive cubic infill and is set the bed of 60 degrees and the nozzle to 210, also attached is a STL file and solidworks file for the model.

This is one of my first models so any feedback would be nice :)

Hexagon Lid (6-pointed) for Desk Grommet System

Desk Grommet System | Base Screw & Nut: https://than.gs/m/924318

Xbox Series X Tentacle Dock - Print-in-Place

Tentacles_Xbox_X-Tentacle_Right_Holoprops.stl

Small & simple desk organizer - Print in place

Free for the first week only! Organize your desk or fire up your 3D Printing business with an easy profit piece*

*For commercial license subscribe to thangs membership

Easy print without supports, make sure to like and follow!

Hexagonal Jar

Hollow Jar.stl

Crayon Quill

Display Only Crayon Quill.stl

Bunny Cable Holder Multicolor - Holoprops

Bunny_Cable_Holder_Multicolor-Holoprops.stl

Circular panel (Interchangeable Vase)

Display Only Interchangeable Circle Vase.obj

Kawaii Cat Loot Box -  No support

Top_Cat_EpicBox_Holoprops.stl

Interchangeable Vase Hexagon Design

Display Only Interchangable Vase.obj

Pen Pal || BackToSchool

Pen Pal V1.21 - Right Shoe.stl

Mesh Pen Holder

This is a pen container with a mesh wall structure, which makes it very durable and solid.

This pen holder fits perfectly with **[Sleek Desk Organizer](https://thangs.com/mythangs/file/920506)**.

---

**Recommended print settings**

- layer height: 0.1 mm
- infill: 10% gyroid
- perimeters: 2
- solid layers: 8
- supports: no
- small perimeters speed: 15 mm/s

Fall Guys Controller Stand

Fall Guys Controller Stand Painted.3mf

 Voronoi Pencil Holder Cup, Office Desk Organizer 

A 3D printable Voronoi pencil holder.

Keep your pens and pencils in one place with this stylish Voronoi pencil holder.

The Voronoi cell structure gives this holder an elegant look and translucent features. The model is easy-to-print, strong, and stable. It also doesn't need any support material. I recommend tuning your retraction settings and aligning the z-seam before printing.  

- Print time: 4 - 6 hours
- Size: 9 x 9 x 10.6 cm
- Weight: 25 - 50 grams

Happy printing

Nozzle size: 0.4 mm
Layer height: 0.2 - 0.3 mm
Walls: 2 - 3
Infill: 10%
Speed: 35 - 60mm/s

Twisted Vase

Just a vase with a cool twisty pattern.

Print Settings:
DO NOT use vase mode
.1 - .2 mm layerheight
no supports
the model is scalable to any size you want to print it at

OFFICE

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Round Screw with Indentation for Desk Grommet System

X-wing Battery Holder

3D Design Checklist - Model like a PRO!

Pencil Pencil Holder

Cylinder based pencil holder

Six Cable Holder.STL

View 12 new models

View 46 new models

View 15 new models

Hexagonal Jar

Crayon Quill

Bunny Cable Holder Multicolor - Holoprops

Circular panel (Interchangeable Vase)

Kawaii Cat Loot Box - No support

Interchangeable Vase Hexagon Design

Pen Pal || BackToSchool

Mesh Pen Holder

Fall Guys Controller Stand

Voronoi Pencil Holder Cup, Office Desk Organizer

Twisted Vase