HMG7 Bondtech LGX Rear Mount.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Wall Mounted Key Hanger - for your keys :)

keyhanger.stl

Lossless Adapter Desk Mount

Lossless Desk Mount.stl

Artemis Extruder EVA3 Mount

Artemis Extruder EVA3 Mount.3mf

Mount for Sonos Roam 2

Sonos Roam 2 Mount.stl

Anker PowerPort Atom III Flex Mounts

Anker PowerPort Atom III - Single Screw - Prusa XL.3mf

SORTSET 3" ULINE Tape Gun Holder

SORTSET MultiBoard Uline Tape Gun Holder.3mf

Trailfinder 2 Mojave (Hilux) Scale Pan & Body Pin with Slider

rtf203-12_1-1_r_body_pin.stl

Wall Speaker Corner Mount

Wall Speaker Corner Wedge.stl

nerf muzzle laser 

nerf muzzle laser.stl

Rectangular Hygrometer snap on 2020 extrusion

Simple bracket to snap on hygrometer to any 2020 extrusion.

*****
Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link:
https://s.click.aliexpress.com/e/_DeAZr9P

******
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j

For Amazon affiliate links
https://wp.me/peMLu6-2C

Kid Hero - Jabu the Raptor Rider (Child Adventurer with Raptor Mount)

Moonlight Minis Logo Coin.stl

motionsensor-bracket.stl

Bathroom Toilet Paper Roll Hanger/Holder (Wall Mount)

WC-03-reverse-RIP-AHOME47.stl

Clip mount for REV Robotics Spark Max

double foam tape DIN clip mount v2.step

Wall-Mounted Shelf.stl

I designed this shelf because I don't have room next to my bed for a table, and needed a place to charge my phone at night.

For strength I used 1.6mm walls, and 20% infill. I personally used a brim, but that's only because I was having warping issues.

EZPZ Tube to Wall Mount

Holder 20mm.stl

Y-axis motor mount

On my Voxelab Aquila X2, the y-axis mount melted, because most likely I set the wrong current to the motor. The shape of the carriage had to be changed, slightly to make it necessary to use less support. The holes are not symmetrically located, just like on the original part. That's how it should be. I printed in the position shown in the last photo. 

The carriage is made of sixth grade nylon with 30 percent glass filling.

I recommend printing with 35% triangle infill and 3 perimeters. Layer height 0.2 mm

Skadis right and left edge mount rods.3mf

Swamp Frog Cavalry - Hikimasa, Hikiga Hunter and Kajika Mount (Pre-Supported)

Hollowed_Hikiga Hunter Mount 54_Supported.stl

Mount

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

HMG7 Bondtech LGX Rear Mount.stl

Wall Mounted Key Hanger - for your keys :)

Lossless Adapter Desk Mount

Artemis Extruder EVA3 Mount

Mount for Sonos Roam 2

Anker PowerPort Atom III Flex Mounts

SORTSET 3" ULINE Tape Gun Holder

Trailfinder 2 Mojave (Hilux) Scale Pan & Body Pin with Slider

Wall Speaker Corner Mount

nerf muzzle laser

Rectangular Hygrometer snap on 2020 extrusion

Kid Hero - Jabu the Raptor Rider (Child Adventurer with Raptor Mount)

motionsensor-bracket.stl

Bathroom Toilet Paper Roll Hanger/Holder (Wall Mount)

Clip mount for REV Robotics Spark Max

Wall-Mounted Shelf.stl

EZPZ Tube to Wall Mount

Y-axis motor mount

Skadis right and left edge mount rods.3mf

Swamp Frog Cavalry - Hikimasa, Hikiga Hunter and Kajika Mount (Pre-Supported)