EZPZ Cable Clip

Keep cables from slipping off your desktop with this simple clip. Just stick some [double sided VHB tape](https://amzn.to/47Ipbyn) on the bottom to affix it to your work surface. For cables up to 4mm in diameter.

Photographed model printed with [Qidi CF-Nylon filament](https://amzn.to/403NySk), but most filaments should work fine.

Geometrical hook with dovetail design

Hook Dovetail Main.3mf

Tiny Keychain Loop

Keychain_Loop.stl

Minimalist Design Headphone Stand, Headset Holder

Base.stl

PLEIADES Pen Stand [Pilot G-2]

Pilot G-2 Pen Holder 0.4 vase PLEIADES.stl

Banana lamp

Banana_lamp_D.stl

Gridfinity 2x1 Base Wall Mount

This is a wall mount for the gridfinity small parts storage system by** Zack Freedman **

This one holds two 1x1 storage bins or one 2x1 storage bin.

The holes for wall mounting are recessed to take pan head screws.
D.I.Y. TINKERER
[https://www.youtube.com/c/diytinkerer](https://www.youtube.com/c/diytinkerer)

Original concept by [Zack Freedman](https://www.youtube.com/c/zackfreedman)


EZPZ Pegboard Hook // 20mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 25mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Creality Sprite ADXL345 Mount

Adafruit ADXL345 mount for the Creality Sprite Pro Upgrade Kit. You will need an Adafruit ADXL345 and (3) M3-6 screws.

Picture Frame Hanging Hook

picture_hook_2.stl

Xbox controller mount

controller stand laying down.stl

Doric Column // Display Stand

Large_Column_Mid_Straight.stl

Tough Little Hook // Peg Anything

I made stronger hooks that use two pegs to prevent rotation. At 100% infill these little suckers can hold a fair amount of weight!

Made for standard pegboard with 1/4" holes spaced 1" apart. Photographed model printed with [MatterHacker White PRO Series PLA](https://bit.ly/PRO-PLA)

EZPZ Pegboard Hook // 10mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

2022 Civic Phone Mounts

Vent Mount.stl

Bloodborne Chargers

Base_92x120.stl

MSI Optix VESA Adaptor (MAG342CQR, MAG342CQRV, MAG301CR2, AG321CQRDE, MAG342CQRVDE)

MSI_vesa_adaptor.stl

EZPZ GPU Anti-Sag Column // NVIDIA 40-Series & Generic Versions

GPU Anti Sag Column Top.stl

EZPZ Pegboard Hook // 5mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 5mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Mount

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

EZPZ Cable Clip

Geometrical hook with dovetail design

Tiny Keychain Loop

Minimalist Design Headphone Stand, Headset Holder

PLEIADES Pen Stand [Pilot G-2]

Banana lamp

Gridfinity 2x1 Base Wall Mount

EZPZ Pegboard Hook // 20mm Hook

EZPZ Pegboard Hook // 25mm Hook

Creality Sprite ADXL345 Mount

Picture Frame Hanging Hook

Xbox controller mount

Doric Column // Display Stand

Tough Little Hook // Peg Anything

EZPZ Pegboard Hook // 10mm Hook

2022 Civic Phone Mounts

Bloodborne Chargers

MSI Optix VESA Adaptor (MAG342CQR, MAG342CQRV, MAG301CR2, AG321CQRDE, MAG342CQRVDE)

EZPZ GPU Anti-Sag Column // NVIDIA 40-Series & Generic Versions

EZPZ Pegboard Hook // 5mm Hook