Albatross Light // Dynamic Desk Lighting System

4pulley-sidea.stl

Starry Candle

Starry Candle is a minimalist candle holder that plays with light and shadow to reflect the shape of a star on the table.

Use this Christmas decoration to set the mood with its lights, as a centrepiece for your Christmas dinners or as a home decoration.

The ideal candles to achieve the maximum shadow effect are the elongated ones, which can be nailed directly to the base, as it has a small spike, or use the tube that is attached to the base to insert the candle. You can also use small candles to achieve a different effect, which are nailed directly to the base.

**3D PRINTING PARAMETERS**
The following configurations are recommended for printing:

No need to use support
Filling of 20%.
Layer height 0.15 mm or less
Bottom layers: 5
Top layers: 3
Wall line count: 7
Recommended to print in matt filament. You can print the candle holder and support tube in different colours to create different combinations.

voronoi lamp shade 1.stl

"This 3D model presents an intricately designed Voro Lamp. The structure uses the concept of Voronoi diagrams for a unique, fragmented appearance that delivers remarkable light patterns once light passes through its curvaceous design. It's inspired by the natural structure, mimicking organic forms found in nature. This model can be ideal for those wanting to create intricate lighting fixtures or exploring complex geometric shapes in their home or office interior decor. The 3D model is available in Stereolithography format (.stl) suitable for 3D printing or for use within a compatible software."

Tube lamp #FunctionalArt

Tube lamp base

Plug In Wall Sconce - #FunctionalArt

Lamp Shade.stl

Da'Bomb Light Version 2 - A warhead that's a light too

Bomb V2 Whole for Thangs.stl

Make Light, Not War Bomb Light #FunctionalArt

whole bomb light.stl

Giraffe lamp

Body

Retro Vase Drum Style

Retro Vase Drum Style. Print in vase mode with a .4 nozzle at 0 .1mm layer height with 75% perimeters overlap. 8 bottom layers.

Can also be used as a votive LED light holder.

Creative Commons License 4.0 BY-NC-ND


Dual Colour Modular Mushroom Caps (Glow-in-the-Dark)

Cap Surface Gyroid.stl

WLED Plant Backlight - Indoor/Outdoor lighting for plants

You will need an LED strip and Controller for this model.  Check out https://thangs.com/mythangs/file/760374 for a full DIY LED Controller you can build.  

This holds the LED strips, wire up to a LED Controller with LEDS and place the post in the ground.  Pretty simple but it can create some really great visual effects in your home or garden.  Simple print. 

Was this model helpful for you? Consider supporting my work in any of the following ways!  Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or
consider supporting my ongoing work https://www.patreon.com/makersmashup
Purchase anything on amazon after visiting our store page https://amzn.to/429HusI  Just click this link first!

No cost option to support my work?

Subscribe to the YT channel
Follow me on Thangs.com
Watch videos on the channel!
Share any of the videos on social media!
Share my models with friends and family!



Diamonds in the Rough (large)

Large Display only do not print.stl

Diamonds in the Rough (medium)

Medium Display only do not print.stl

Diamonds in the Rough (small)

Small Display only do not print.stl

Cable Reel

Cable reel ideal for Christmas lighting cables and LED cables.

VORONOI CONE.stl

voronoi lampshade 19.stl

voronoi lamp 122 simple .stl

Voronoi design 05 STL Scalable

LED Light Bar Mount For Round Rods

I decided I was tired of my CR-10 enclosure being dark all the time, so I rummaged up a 24V LED light bar and designed this mount for it.  

I have two different enclosures, with two different frame diameters, 16mm and 14.75mm.  I have included both versions in STL format and the STEP file for those wishing to modify the design for their own use.

I would suggest two of these mounts for each light bar.  The mounts incorporate a steel clip and fastener that is included with the light bar kit, and each mount uses one additional M3x25 SHCS and M3 nylon-insert locknut.

For a standard installation of one lightbar you would require the following:

Bill of Materials
- 12-24V LED Light Bar and Mounting Hardware (the mount was designed to fit one of the lights in this four pack: https://www.amazon.com/dp/B08T8VG75B or equivalent), Quantity 1
- M3x25 SHCS (McMaster 91292A020 (sold qty 100) or equivalent), Quantity 2
- M3 Nylon-Insert Locknut (McMaster 93625A100 (sold qty 100) or equivalent), Quantity 2
- LED Strip Mount, printed, Quantity 2

Refer to the attached images to determine the assembly methods.

I chose to design this part for resin printing, using a toughened resin.  As I printed these on an mSLA printer, I cannot speak to the veracity of this part for FDM printing.  

If one chose to use an FDM I would suggest orienting the rod axis parallel with the printer Z axis, and print with supports.

Lighting

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 66 new models

View 21 new models

voronoi lamp shade 1.stl

Tube lamp #FunctionalArt

Plug In Wall Sconce - #FunctionalArt

Da'Bomb Light Version 2 - A warhead that's a light too

Make Light, Not War Bomb Light #FunctionalArt

Giraffe lamp

Retro Vase Drum Style

Dual Colour Modular Mushroom Caps (Glow-in-the-Dark)

View 13 new models

Diamonds in the Rough (large)

Diamonds in the Rough (medium)

Diamonds in the Rough (small)

View 10 new models

VORONOI CONE.stl

voronoi lampshade 19.stl

voronoi lamp 122 simple .stl

Voronoi design 05 STL Scalable

LED Light Bar Mount For Round Rods