Teardrop Pod (Reentrant Lattice)

This Teardrop Pod can be used to hang plants, moss, or any other small object. It is part of a series of three featuring delicate lattice structures that use very little material to print. These models are designed for resin printing.

See here for video: https://youtu.be/ZT0Dhcexz80 

Download the full set:
Teardrop Pod FCC Lattice: https://than.gs/m/889694 
Teardrop Pod Reentrant Lattice:
Teardrop Pod Truncated Cube Lattice:

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 8K with Phrozen Dental Study white resin.


Teardrop Pod (FCC Lattice)

This Teardrop Pod can be used to hang plants, moss, or any other small object. It is part of a series of three featuring delicate lattice structures that use very little material to print. These models are designed for resin printing.

See here for video: https://youtu.be/ZT0Dhcexz80 

Download the full set:
Teardrop Pod FCC Lattice:
Teardrop Pod Reentrant Lattice:
Teardrop Pod Truncated Cube Lattice:

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 8K with Phrozen Dental Study white resin.


Knit Fabric Bowl

A contoured bowl with a delicate knit pattern.

See here for video: https://youtu.be/62-jRSQfk_Y 

This model is designed for resin printing and can be printed directly on the build plate with no supports.

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 8K with Phrozen Dental Study white resin.


Lattice Benchy (Wicker Lattice)

The hull and walls of this Benchy are built with face-centered cubic lattice structure. Great to show off your resin printer, but not very seaworthy.

See here for video: https://youtu.be/GFnzZk8DGfQ 

See here for other Lattice Benchy designs:
Face-centered Cubic Lattice: https://than.gs/m/874758 
Wicker:


Lattice Benchy (Face-centered Cubic Lattice)

The hull and walls of this Benchy are built with face-centered cubic lattice structure. Great to show off your resin printer, but not very seaworthy.

See here for video: https://youtu.be/GFnzZk8DGfQ 

See here for other Lattice Benchy designs:
Face-centered Cubic Lattice:
Wicker:


Celtic Chess Pieces

Celtic King.stl

Lattice Easter Egg (Wicker)

Lattice Egg - Wicker.stl

Lattice Easter Egg (Chain Link)

Lattice Egg - Chain Link.stl

Celtic Knot Gridfinity Bin 2x2 Extended

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard: https://social.thangs.com/m/733950 
Celtic Knot Gridfinity Bin 1x1 Extended: https://social.thangs.com/m/733951 
Celtic Knot Gridfinity Bin 1x2 Standard: https://social.thangs.com/m/733953 
Celtic Knot Gridfinity Bin 1x2 Extended: https://social.thangs.com/m/733956 
Celtic Knot Gridfinity Bin 2x2 Standard: https://social.thangs.com/m/733962 
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


Chain Link Gridfinity Bin 2x2 (80mm)

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 20mm, 40mm, 60mm and 80mm

See here for video: https://youtu.be/ia-tEUhWVfw 

See here for 3D files:
Chain Link Gridfinity Bin 2x2 20mm: https://social.thangs.com/m/714038 
Chain Link Gridfinity Bin 2x2 40mm: https://social.thangs.com/m/714060 
Chain Link Gridfinity Bin 2x2 60mm: https://social.thangs.com/m/714082 
Chain Link Gridfinity Bin 2x2 80mm: 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034

See here for single unit bins:
Chain Link Gridfinity Bin Single 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin Single 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin Single 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin Single 100mm: https://social.thangs.com/m/664302


Celtic Knot Bowl

This stone-textured bowl features a band of Celtic knot latticing.

See here for video: https://youtu.be/By4EBZ9ATp0 


TPMS Tree (Fischer Koch S)

TPMS Tree (Fischer Koch S).stl

TPMS Tree (Diamond)

TPMS Tree (Diamond).stl

TPMS Tree (Gyroid)

TPMS Tree (Gyroid).stl

Truss Tree (Truncated Octahedron)

Truss Tree Truncated Octahedron.stl

Truss Tree (Kelvin)

Truss Tree Kelvin.stl

Truss Tree (Flourite)

Truss Tree Flourite.stl

Truss Tree (Diamond)

Truss Tree Diamond.stl

Ultimate Pasta

This is the ultimate piece of pasta. If you have a Pasta Printer you could print it for World Pasta Day on October 25 or US National Pasta Day on October 17.

See here for video: https://youtu.be/4qpxfTHBdzM 

This playful sculpture is derived from a matrix of Kelvin polyhedra, a fourteen-sided polyhedron with 6 squares and 8 hexagons. A triagonal piece of pasta is stuck on to each hexagonal face. This structure is also known as 8-srs. Yum.


Architected Skull (FCC)

This skull is part of a series that demonstrates three of the architecting features in nTopology software.

See here for video: https://youtu.be/ZX4rk4VM46U 

In this series, the Gyroid Triply Periodic Minimal Surface, Face Centered Cubic Lattice and Hexagonal Honeycomb unit cells have been applied to a conformal cell map derived from the outer surface of the skull. Using this technique allows the structures to follow the bone contours and converge on the front and back of the skull.

See here for other models in the series:
Gyroid
FCC:
Hex Honeycomb:


Lattice

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Teardrop Pod (Reentrant Lattice)

Teardrop Pod (FCC Lattice)

Knit Fabric Bowl

Lattice Benchy (Wicker Lattice)

Lattice Benchy (Face-centered Cubic Lattice)

Celtic Chess Pieces

Lattice Easter Egg (Wicker)

Lattice Easter Egg (Chain Link)

Celtic Knot Gridfinity Bin 2x2 Extended

View 10 new models

Celtic Knot Bowl

TPMS Tree (Fischer Koch S)

TPMS Tree (Diamond)

TPMS Tree (Gyroid)

Truss Tree (Truncated Octahedron)

Truss Tree (Kelvin)

Truss Tree (Flourite)

Truss Tree (Diamond)

Ultimate Pasta

Architected Skull (FCC)