Klein Bottle Diamond Lattice

Klein Bottle - Diamond Lattice.stl

CERCA |  Modular Screen Table Lamp E14, E26, E27

CERCA_table-lamp-MeshPlate_long-small.stl

Celtic Chess Pieces

Celtic King.stl

Lattice Hearts

Lattice Heart - Diamond.stl

Lattice Benchy (Wicker Lattice)

The hull and walls of this Benchy are built with face-centered cubic lattice structure. Great to show off your resin printer, but not very seaworthy.

See here for video: https://youtu.be/GFnzZk8DGfQ 

See here for other Lattice Benchy designs:
Face-centered Cubic Lattice: https://than.gs/m/874758 
Wicker:


Seismic Vases - Cylindrical

Seismic Vase Cylinder Large.stl

Knit Fabric Bowl

A contoured bowl with a delicate knit pattern.

See here for video: https://youtu.be/62-jRSQfk_Y 

This model is designed for resin printing and can be printed directly on the build plate with no supports.

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 8K with Phrozen Dental Study white resin.


Lattice Planter

Top Planter.stl

Lattice Skull Diamond

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond:
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Teardrop Pod (Truncated Cube Lattice)

This Teardrop Pod can be used to hang plants, moss, or any other small object. It is part of a series of three featuring delicate lattice structures that use very little material to print. These models are designed for resin printing.

See here for video: https://youtu.be/ZT0Dhcexz80 

Download the full set:
Teardrop Pod FCC Lattice: https://than.gs/m/889694 
Teardrop Pod Reentrant Lattice: https://than.gs/m/889700 
Teardrop Pod Truncated Cube Lattice:

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 8K with Phrozen Dental Study white resin.


Teardrop Pod (FCC Lattice)

This Teardrop Pod can be used to hang plants, moss, or any other small object. It is part of a series of three featuring delicate lattice structures that use very little material to print. These models are designed for resin printing.

See here for video: https://youtu.be/ZT0Dhcexz80 

Download the full set:
Teardrop Pod FCC Lattice:
Teardrop Pod Reentrant Lattice:
Teardrop Pod Truncated Cube Lattice:

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 8K with Phrozen Dental Study white resin.


Seismic Vases - Square

Seismic Vase Large.stl

Lattice Skull Square

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square:
Diamond:
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Lattice Skull Wire Tangle

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave: https://than.gs/m/948893 
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Lattice Benchy (Face-centered Cubic Lattice)

The hull and walls of this Benchy are built with face-centered cubic lattice structure. Great to show off your resin printer, but not very seaworthy.

See here for video: https://youtu.be/GFnzZk8DGfQ 

See here for other Lattice Benchy designs:
Face-centered Cubic Lattice:
Wicker:


Teardrop Pod (Reentrant Lattice)

This Teardrop Pod can be used to hang plants, moss, or any other small object. It is part of a series of three featuring delicate lattice structures that use very little material to print. These models are designed for resin printing.

See here for video: https://youtu.be/ZT0Dhcexz80 

Download the full set:
Teardrop Pod FCC Lattice: https://than.gs/m/889694 
Teardrop Pod Reentrant Lattice:
Teardrop Pod Truncated Cube Lattice:

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 8K with Phrozen Dental Study white resin.


Ceiling lamp

model274.stl

Lattice Skull Wire Weave

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Lattice

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Klein Bottle Diamond Lattice

CERCA | Modular Screen Table Lamp E14, E26, E27

Celtic Chess Pieces

Lattice Hearts

Lattice Benchy (Wicker Lattice)

Seismic Vases - Cylindrical

Knit Fabric Bowl

Lattice Planter

Lattice Skull Diamond

Teardrop Pod (Truncated Cube Lattice)

Teardrop Pod (FCC Lattice)

Seismic Vases - Square

Lattice Skull Square

Lattice Skull Wire Tangle

Lattice Benchy (Face-centered Cubic Lattice)

Teardrop Pod (Reentrant Lattice)

Ceiling lamp

Lattice Skull Wire Weave

Kumiko Lamp (Asanoha)

Lattice Vase