Butterfly Stand for planters and stuff!

Butterfly Base.stl

Garden Windmill

Garden Windmill.STEP

3 little planters

Pot waffel design.stl

Bedside Tissue Box Holder and Cover

Pool Vaccum Attachment Rev 2.step

~Printable Pool Vacuum attachment for above ground vinyl pools. Attaches to standard size pool hose~

Vase Mode Toilet Vase

Table Saw 45 deg Miter Sled (16.6mm Slot)

This 45 deg miter sled fits a table saw with a 16.6 mm wide slot.

miter45_16.6mmsled.stl

Touchlight LIght Bulb socket mount

Had some hanging lights that didn't have actual electrical ran to them and instead had battery powered LED puck lights stuck to them. These mounts make that more secure.

Light dimensions are 76mm diameter and 20mm height

TinCognito - Cutlery Set

TinCognito - Mini Survival Kits upcycling Altoids Tins. The TinCognito shell helps keep the tin closed and makes it easy to identify the contents. 

See it in action here: https://youtu.be/n5_aQ29rqwE

The blank one can be used with the help of TinkerCad or Fusion 360 to place an SVG on the 3 sides.  Then print away!

Was this model helpful for you? Consider supporting my work in any of the following ways!  Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or
consider supporting my ongoing work https://www.patreon.com/makersmashup
Purchase anything on amazon after visiting our store page https://amzn.to/429HusI  Just click this link first!

No cost option to support my work?

- Subscribe to the YT channel
- Follow me on Thangs.com
- Watch videos on the channel!
- Share any of the videos on social media!
- Share my models with friends and family!



Shower Holder v1.stl

Soap Holder for shower. Hangs over glass door.
2 parts in one STL. Split parts in slicer.

Please leave a comment and add a pic of your prints.

License Type = CC BY-NC-SA
(CC Attribution-NonCommercial-ShareAlike)



Hybrid Hanging/Desk Sun Lamp

Outdoor Garden chair #OutdoorThangs

#OutdoorThangs 
A 3d Model of A fire place made in Autodesk Inventor. 
#OutdoorThangs

Self-Watering Planter Addon

This is a fantastic way to turn a normal plant pot into a self-watering plant pot. To set this up, just push it into the soil and put water into it. I'd really appreciate some feedback while you're here because it would help me know what you want to see next.

Retro Vase Decanter Style

Retro Vase Decanter Style evokes a mid-century modern vintage vibe aesthetic. This model is a _Vase-Mode only _print.  You can filament swap the textured area to create the effect in the images, you will need to manually enter the swaps depending on your scale and layer height. Teal & Copper is %50 scale. Burnt Titanium & Cyan Silk is %25 scale.

**Settings for 0.4 nozzle:**
_Vase-Mode only print - 1 perimeter no top._
**Layer Height:** 0.1mm
**Bottom Layers:** 8
**Extrusion width:** Default 0.6mm on all settings
**Perimeters Overlap:** 50%

**Settings for 0.8 nozzle:**
_Vase-Mode only print - 1 perimeter no top._
**Layer Height:** 0.2mm
**Bottom Layers:** 8
**Extrusion width:** Default 1.2 mm on all settings
**Perimeters Overlap:** 50%

Creative Commons License 4.0 BY-NC-ND

Swag Lamp

swag_lamp_frame.stl

Smashed Saucer

Frustrated by your 3D printer? Feel like smashing something? This model is for you!

See here for video: https://youtu.be/Zj9uAsy1CM0

This Smashed Teacup is part of a set of Smashed Tableware. See links below for other pieces in the set. More to come!

Other pieces of Smashed Tableware:
Teacup: https://than.gs/m/863790 
Saucer:


Bed frame phone holder

Resin Tool Caddy

A caddy for your resin tools, with a grid bottom to allow resin to run through. This model 

caddy.stl

Low Poly Eevee Planter

**Low Poly Eevee  Planters **

I've only printed this model in FDM so far. No supports needed. They are currently at the MAX scale that I could fit on an Ender 5 Pro (220x220 build plate), but you can scale up or down as you please.  I've printed as small as 50% and they looked fine to hold a small succulent.  Any smaller and you might not fit anything in it!

**Here Are the Settings I Used to Print:**
Nozzle: I printed with 0.6 mm with no issues.
Infill/Perimeters: I personally use 10% infill with 2 perimeters and have no issues.
Supports: None

**Post-Processing/Assembly:**
None needed, but I personally spray them with a UV protective coat after printing so they retain their color longer!			
			
			
			

Mini Swag Lamp

The Mini Swag Lamp can be printed and used with the hanging swag setup or without as a table top tealight holder.

The lamp is to be used with a small tealight LED candle only! do not expose model to heat or fire.

Files contained.
Frame
Gem
Skinny Gem
Votive Holder Straps
Votive Holder Base
Swag Chain 2 Lengths
Swag Chain Connector


Home & Garden

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 10 new models

Garden Windmill

3 little planters

Bedside Tissue Box Holder and Cover

Pool Vaccum Attachment Rev 2.step

View 43 new models

View 14 new models

Touchlight LIght Bulb socket mount

View 13 new models

Shower Holder v1.stl

View 17 new models

Outdoor Garden chair #OutdoorThangs

Self-Watering Planter Addon

Retro Vase Decanter Style

Swag Lamp

Smashed Saucer

View 10 new models

Resin Tool Caddy

View 28 new models

Mini Swag Lamp