Hanging Cat Ornament

A cat climbing the windowblinds

Print at 0.3mm layer height

If using Bambu Studio set the wall generator to Arachne

If using Cura make sure 'print thin walls' is checked.

Print the first 4 layers in white then swap to black for the rest of the print

SOLWAVE wall sunglasses holder

wave.stl

Adhesive Wall Hook

Adhesive Wall Hook_STL.stl

Window bird feeder

Base.stl

Mushroom picture frame “Trametes Pubescens”

Frame_vertical.stl

Modular hanging planter

Top.stl

Lamp “Bonbon”

Bonbon_desk.3mf

Cthulhu picture nook

Cthulhu.stl

Pendant light spot “Robur Tree”

Pendant_lamp.stl

EZPZ Keyring 1" BEEFY // Keychain Ring

EZPZ_ring_1in_BEEFY.stl

Bird feeder | suet ball holder

Body.stl

EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Octopus Wall Art/Hanger

This sleek cephalapod has a keyhole hanger on the back for wall mounting. Useful for holding light items like jewelry, earbuds, keys. etc... or simply as a cool piece of wall art. The thin tentacles may be fragile, so print with plenty of shells if you do plan on hanging anything from them.

Just under 150 mm long, although the pictured model was printed at 150% scale with the stunning [Fillamentum Vertigo Starlight PLA](https://bit.ly/vstarlight).

Print with 2-10 shells/perimiters depending on what you plan to use this for. 5% infill should be fine.

Hanging Planter

**A creative hanging planter for your home or garden.**

**What you need:**
- The 3d printed thing
- Yarn with about 3mm in diameter (can be flax, hemp, whatever)

The assembly instructions are in the images.

Size: 90 × 80 × 170 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 90 x 90 x 180 mm
Material usage: 110g
Print time: 10h

Material: PLA
Print direction: stl is rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0.28 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: brim

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

Voronoi Planter w/Wall Attachment by MODERN MACHINE

WALL-PLANTER.stl

The Dex Hanging Planter Pot | Modern and Unique Home Decor for Plants and Succulents  | STL File

DEXHANGING.stl

KETE  |  Pendant Light E27 & E26 fast print

KETE_pendant-light_Large_V4.stl

Hanging Trash Can

D.stl

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

The Jani Hanging Planter Pot | Modern and Unique Home Decor for Plants and Succulents  | STL File

JANIHANGING.stl

Hanging

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Hanging Cat Ornament

SOLWAVE wall sunglasses holder

Adhesive Wall Hook

Window bird feeder

Mushroom picture frame “Trametes Pubescens”

Modular hanging planter

Lamp “Bonbon”

Cthulhu picture nook

Pendant light spot “Robur Tree”

EZPZ Keyring 1" BEEFY // Keychain Ring

Bird feeder | suet ball holder

EZPZ Pegboard Hook // 25mm Reinforced Hook

Octopus Wall Art/Hanger

Hanging Planter

Voronoi Planter w/Wall Attachment by MODERN MACHINE

The Dex Hanging Planter Pot | Modern and Unique Home Decor for Plants and Succulents | STL File

KETE | Pendant Light E27 & E26 fast print

Hanging Trash Can

EZPZ Pegboard Hook // 10mm Hook Type B

The Jani Hanging Planter Pot | Modern and Unique Home Decor for Plants and Succulents | STL File