Headphone Hook holder hanger wall mount

A compact headphone hanger with a 3.5mm screw hole

Headphone Hook

Spray Bottle Hangar 

This is a Spray bottle hangar I designed around a basic idea with a strict guideline. 
No brim, rafts or supports required.
These are capable of holding 1KG and can withstand roughly 1G of force applied to them In this revision if you have good layer adhesion. Printed upright I found minimal to no stringing even on an untuned machine. This is a 1-2 hour print depending on the machine. Light on material and strong I print this at 3 wall, 3 top/bottom and 10-20% infill. Tested in Esun PLA+ and in Esun PETG. Please share with attribution and give feedback as this was my first design taken to testing and commercial phase. Some early concepts are in photos and had many issues, early revisions can be provided if wanted for some reason. Best mounting practice is 2 x 8G 16mm Button heads, Remove mouse ears after print.
 

** Update
V1_6
Re sketched and reformatted some of the features for increased slicer reliability and modified how the different facets of the design interact. This has reduced file size from  9.64Mb to 1.06Mb. Changed Mouse ear generation from eye balled placement to a grid deploy and changed the 2 sides from separate sketches to a mirrored sketch increasing the symmetry by 0.05mm. 
Again any issues or notes please comment, Makes are always appreciated. 

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Modern Keychain Hanger - MINI

KeyHanger3Platform-Mini.stl

Generic LED Desk Lamp Remote Holder

Remote Holder V1_2.step

Headset Hanger Wall Mount v2

Headset Wall Mount v2.stl

Controller and Headset Wall Mount v2

Controller Headset Wall Mount v2.stl

Telstra TV (Roku 4200TL) TV Hanger 

Telstra TV Holder V 1_3.stl

GripperHook

GH_hook.stl

Chomper Hand Towel Hanger

Chomper Hanger 2 V1.21 - Chomper.stl

Tippi Fruit Ornament Conversion Stem

Turn your [Tippi Tree](https://than.gs/m/933018) Fruits, Berries, and more into standard ornaments with this alternate stem. Feed a string or wire through the 2mm hole and it's good to go. Also great for making necklaces, earrings, car ornaments, and whatever else you can dream up!

Easy print, no supports required. 2-3 shells, 11% infill, 0.16mm layer height, or whatever suits your use.

Tippi Fruit Ornament Conversion

radiating-hex-ornament.stl

A fun wind ornament that creates a radiating hexagon pattern as it catches light while spinning. Print with a reflective silk/shiny filament for best results!

I used MatterHackers Quantum PLA for an added dual color effect ([MatterHackers](https://bit.ly/quantumPLA), [Amazon](https://amzn.to/3Xr5plJ))

 

Prints without supports, but you may want to use a brim to keep it stable.

Woodpecker Square Wall Mount

these little brackets can be mounted anywhere to safely store your Woodpecker T-squares and straight edges.  Profile matches the tool for a nice fit.

Snowflake Ornament (Customize)

Snowflake_BigChamfer.stl

Desktop Headset "T" Hanger

desk top T hanger v1.stl

Spider on a Web

Spider.stl

Triangle Multi Hanger - BackToSchool

Hook for triangle multi hanger.stl

Seagate Expansion 4TB External Drive Holder // Peg Anything

Get your [Seagate Expansion external drive](https://amzn.to/3L9GIWh) off the desk and on the wall with this holder compatible with your standard 1" grid 1/4" hole pegboard. Nice!

This is for the 4TB model, so make sure it matches what's shown in my photo. I'm not sure if the lower storage sizes are thinner.

 

 

Hanger

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 24 new models

Spray Bottle Hangar

EZPZ Pegboard Hook // 20mm Hook Type B

EZPZ Pegboard Hook // 10mm Hook Type B

View 17 new models

Modern Keychain Hanger - MINI

Generic LED Desk Lamp Remote Holder

Headset Hanger Wall Mount v2

Controller and Headset Wall Mount v2

Telstra TV (Roku 4200TL) TV Hanger

GripperHook

Chomper Hand Towel Hanger

View 16 new models

View 78 new models

View 15 new models

View 18 new models

View 40 new models

Spider on a Web

View 11 new models

View 21 new models