Double hook

double_hook.STL

Wreath Hangar

Wreath Hangar v3.stl

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

GripperHook

GH_hook.stl

Simple Wall Hook

Simple Wall Hook S.stl

Speediance: Hook

A replacement, or extra, hook for the Speediance Smart Gym.

This also fits nicely in Speediance Bar hook holder creater by Saucy-Sos: https://www.printables.com/model/586432

Printed in PLA on my X1C with supports.

If you have a multi filiament capable printer I highly recommend the supports config suggested here:

https://forum.bambulab.com/t/support-filament-petg-for-pla-and-pla-for-petg-and-more/5942/4

Space Saver Hanger Same Side - Multi Hanger - BackToSchool

Hanger multi all one side.stl

Chainstitch Hook Tool

I made this tool specifically for the wood stitching technique I shared in [this giant number video](https://youtu.be/TfWg3YX8hmY). It is designed for 1/4" holes and [7 Strand Paracord.](https://amzn.to/481z3mU)

ABS is ideal. PLA may work for a while but it's prone to breaking at the thinnest section. Nylon, ASA, PETG may also work well.

Two part Carabiner - BackToSchool - H4/H4L

Final carabiner.stl

Tough Little Hook // Peg Anything

I made stronger hooks that use two pegs to prevent rotation. At 100% infill these little suckers can hold a fair amount of weight!

Made for standard pegboard with 1/4" holes spaced 1" apart. Photographed model printed with [MatterHacker White PRO Series PLA](https://bit.ly/PRO-PLA)

Shaving Razor Mirror Hook

Razor holder that can be attached to a mirror via suction cup.

Yet Another Wall Hook | Tesa Powerstrip

This is another wall hook to use with tesa power strips or something similar. So - mount without drilling. I use it in my kitchen.

A Most Minimal Wall Hook

wallhook-body.STL

Peg Anything // Tough Large Hook

l-hook-sturdy.stl

Double Hook

Simple double hook. Added holes for screws or nails, but can also be attached with command strips. 
Theoretically should print well on either side, but I recommend flipping the model and enabling the brim for better bed adhesion and to avoid warping on the first layer.

Cable Hook

Minimalistic Between Brick Hook

Brick Mounted Hook 10mm.stl

General purpose hook

I've designed this hook to attach our bluetooth speaker to our sun umbrella. 

I've uploaded the design because others may find it useful too.

Hook radius is 6cm (2.36in). Didn't test how much weight it can handle, so take care and test before suspending heavy items with this hook.

I've printed it for strength. Infill = grid & 25%. 6 wall loops.

HOOK

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Double hook

Wreath Hangar

EZPZ Pegboard Hook // 20mm Hook Type B

EZPZ Pegboard Hook // 10mm Hook Type B

View 17 new models

GripperHook

Simple Wall Hook

Speediance: Hook

View 11 new models

View 21 new models

Two part Carabiner - BackToSchool - H4/H4L

View 20 new models

Shaving Razor Mirror Hook

Yet Another Wall Hook | Tesa Powerstrip

View 66 new models

View 111 new models

Double Hook

Cable Hook

Minimalistic Between Brick Hook

General purpose hook