Gridfinity Pinecil + TS100 Tips and Tool Holder

Pinecil Tips w Magnet.stl

Gridfinity 1x1x1 Hex bit holder x14.stl

**This is a 1x1 Gridfinity module for 14 Hex bits**

Gridfinity system by** Zach Freedman**

please visit my Youtube Channel [https://www.youtube.com/c/DIYTINKERER](https://www.youtube.com/c/DIYTINKERER) :-)


MultiBoard Pen_, Pencil, Marker

MultiBoard-Pen_Holder.stl

#Gridfinity Usb and SD Card Holder 

This item is for use with the #GridFinity system by Zach Freedman:

[https://www.youtube.com/watch?v=ra_9zU-mnl8](url)

 A 1 wide by 2 deep by 1/2 unit high USB thumb drive and SD card holder on a weighted base plate. 
 
Contrary to Zach's instructions, I've been printing all my modules with a 0.8 nozzle, which seems to work just fine. This item was printed with silver PLA at 75mm speed on an ender 3 pro with 0.8 nozzle and 0.32 layer height without support. The holder has slots for 4 USB Devices, 6 Standard SD cards and 6 Micro SD cards. The Standard slots are capable of holding 2 Memory Stick Duo's for all you PSP fans and even xD cards for you retro Fujifilm camera users. Tolerances are loose to allow the model to be printed easier on poorly configured printers that over extrude.

GEN2 Table Top Kit V2 - 185

Cover - Upper - Double - STANDARD.stl

Gridfinity Dungeon Kit for Tabletop RPGs - Modular Building System

Corner.stl

#Gridfinity Parametric Bit Holders

1x2 Bit Holder.stl

Gridfinity | Can Holder

Gridfinity_Canholder_Tall.stl

Corrugated Gridfinity Light Bins (No vase mode)

Co_Lt_Bin_3x4x6.step

Gridfinity Solder Holder station

Gridfinity Solder Holder Base

Lying baby dragon - compatible with Amazon Dot

Lying baby dragon STL.stl

Gridfinity Lids

Gridfinity Lid 1x3.stl

Gridfinity AA Battery Holder

An extension of #GridFinity by Zach Freedman:
https://www.youtube.com/watch?v=ra_9zU-mnl8

A standard 2x2x3 AA Battery holder. Holds 25, with convenient tapers to allow the batteries to slide in easily. I made sure to add a bit of extra space as rechargeable batteries are often thicker than standard.

#Gridfinity Holder-2x2x3-25AABatteries

GridfiniTEA - Stackable tea bag dispenser and storage for Gridfinity

GridfiniTEA - Container.stl

Gridfinity slightly improved frame (no rocking)

3x4 Frame.3mf

Gridfinity AAA Battery Holder

A standard 2x1x3 AAA Battery holder. Holds 21, with convenient tapers to allow the batteries to slide in easily.

An extension of #GridFinity, open sourced by Zach Freedman:
https://www.youtube.com/watch?v=ra_9zU-mnl8

#Gridfinity Holder-2x1x3-21AAABatteries

Gridfinity Baseplate Magnet Jig

Gridfinity Ruler Holder

A 1x1 unit that has 6 slots in it, 2.5 mm width, for holding rulers vertical in a drawer using the #gridfinity system. 

***Note**, This unit is can be stacked on top of other units, but can't be stacked on top of!

Gridfinity Pliers Holder 3 in 5x2

A Gridfinity Holder for Pliers with 3 slots in 5x2 configuration

Gridfinity | Paper Towel Roll

A 3x3x32cm Paper Towel Roll holder for your  Gridfinity arrangement.

Suggest standard profiles with 25%-50% infill. There is a thicc area at the bottom of the dowel for increased strength.

Gridfinity concept by Zack Freedman

GridFinity

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity Pinecil + TS100 Tips and Tool Holder

Gridfinity 1x1x1 Hex bit holder x14.stl

MultiBoard Pen_, Pencil, Marker

#Gridfinity Usb and SD Card Holder

GEN2 Table Top Kit V2 - 185

Gridfinity Dungeon Kit for Tabletop RPGs - Modular Building System

#Gridfinity Parametric Bit Holders

Gridfinity | Can Holder

Corrugated Gridfinity Light Bins (No vase mode)

Gridfinity Solder Holder station

Lying baby dragon - compatible with Amazon Dot

Gridfinity Lids

Gridfinity AA Battery Holder

GridfiniTEA - Stackable tea bag dispenser and storage for Gridfinity

Gridfinity slightly improved frame (no rocking)

Gridfinity AAA Battery Holder

Gridfinity Baseplate Magnet Jig

Gridfinity Ruler Holder

Gridfinity Pliers Holder 3 in 5x2

Gridfinity | Paper Towel Roll