HueForge  - Pink Peony

BrightPinkPeony_Front_150x137.stl

Spider Web Vase


License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***


SPIRAL PLANT POT

HELLO MY FRIENDS, I CREATED THIS SPIRAL-SHAPED PLANT POT BECAUSE I LOVE GEOMETRIES AND PARTICULAR SHAPES, I HOPE YOU REALLY LIKE IT. IF YOU PRINT MY MODELS TAG ME ON SOCIAL MEDIA AND FOLLOW MY PAGE ON INSTAGRAM TO SUPPORT ME PLEASE. THANK YOU SO MUCH TO ALL THOSE WHO APPRECIATE MY DESIGNS, I'M VERY GRATEFUL

Aztec Pattern -Taper Vase

FREE TO DOWNLOAD THROUGH AUGUST 31st!!!
Then it goes into the Member Vault :)

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***

Calla Lily Flower (Vase Mode)

VaseMode_CallaLilly_Flower.stl

45 mirror vase 001.stl

mirrored version of my first Vase 45 twist 001

Doublevase classic v1.stl

Doublevase

Swamp Mana Vase -(Magic The Gathering Inspired)

**Free downloads through August 21tst,
then they go to the Members Vault!**

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***

Springo Cactus Trichocereus

cactus-wflower.stl

geometric vase

The vase is 20cm high and about 12cm wide.
Don't forget to set the print in vase mode.

Vase and Drum 2 in 1

A vase mode print can either be used as a small drum or as a simple vase.
I printed on an ender 3 in vase mode and was able to function as a vase and hold water. 



Oblique vase #FunctionalArt

No supports needed, if you are going to put water in it i recommend min 3 walls or coating the inside with a sealer.  #FunctionalArt

Affection Arc - U Shaped Modern Vase

---

📝 Description

---
The Affection Arc, a charming vase design, elegantly unifies both sides through a graceful bottom loop. With scalable dimensions, it offers flexibility to suit any setting or preference. While this model generally prints without the need for supports, there may be some excess loops at the base requiring minor trimming. As illustrated in the accompanying photograph, these have been neatly clipped for a refined finish.
&nbsp;

---

🖨️ Printing Tips

---

This is a longer running print as there is a lot of detail in it.  Supports may be required at the bottom esp. while scaling.  The photo shows this printed in polymaker matte white https://amzn.to/471yx83 . I have no affiliation, just like the filament. 
&nbsp;

---

🔗 Additional Information

---

Should easily hold soil and water but please test before planting your plants in it.  
&nbsp;

---

⚖️ License

---

**Free For Personal Use - Commercial Restricted License (with subscription)** 🟠

🔄 *Attribution* | 🎨 *Remix* | 💼 *Free for Personal Use + Resale with Subscription*

&nbsp;

---

👥 Community

---

🌟 *Adore this model? Show some love to Rob, the one-man creative force behind Makers Mashup, and dive into more maker adventures!* 🌟

🎥 **Watch & Subscribe on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1)** - Assembly videos, tutorials, and much more. Don't miss out on new content!

🔗 **Join the Creative Journey on [Thangs.com](https://www.thangs.com)** - Follow me for the latest models and exclusive content.

🤝 **Engage with the [Community Discord](https://discord.gg/ZDKq5N2)** - Get help and advice from a large and vibrant community. Build anything with the support of fellow makers!

📲 **Get Social with Makers Mashup** - 🐦 [Twitter](https://twitter.com/MakersMashup) | 📸 [Instagram](https://www.instagram.com/makers_mashup/) | 👍 [Facebook](https://www.facebook.com/MakersMashup) - See work in progress, prints, and more.

❤️ **Support the Channel & Creator** - Your support makes a difference!
   - 🤝 [Patreon](https://www.patreon.com/makersmashup) – Support my ongoing work and get access to exclusive content!
   - 💸 Drop a tip: [Ko-fi](https://koji.to/k/8E9J)
   - 🛍️ Shop on Amazon? Click [this link](https://amzn.to/429HusI) before your next purchase. It helps the channel at no extra cost to you!

🔓 **Unlock Incredible Benefits**
   _with a Paid Subscription on [Thangs.com](https://www.thangs.com), or Select Tiers on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1) or [Patreon](https://www.patreon.com/makersmashup)_

   - Resale Abilities
   - Early Access to Models
   - Request New Models
   - Exclusive Discord Channel for Supporters with Behind-the-Scenes Content

🚀 *Let’s build, share, and grow together!* 🚀








Holy Moly! - Modern Vase

---

📝 Description

---

Holy Moly! A modern vase with a huge hole in the center.  This has a nice and thick 2.4mm thickness which allows you to place water and fresh flowers in it.  A great conversation piece this 3D Printed vase requires no supports to print. 
&nbsp;

---

🖨️ Printing Tips

---

Thick layer height .3mm works best without supports or infill.  Use 4 or 5 walls/perimeters which will produce a thick and sturdy print.   Polymaker's Poly Terra Pastel Peanut which is shown in the photo https://amzn.to/3NJA7Cm .  I have no affiliation with polymaker. 
&nbsp;

---

🔗 Additional Information

---

No assembly necessary.  This is suitable for water or soil if you want to plant a real plant.  Test it by placing water inside, if you dont have any leaks you're good to go.  A light dusting of clear sealer on the inside can also help seal it up but the 2.4mm width of the print is generally sufficient. 
&nbsp;

---

⚖️ License

---

**Free For Personal Use - Commercial Restricted License (with subscription)** 🟠

🔄 *Attribution* | 🎨 *Remix* | 💼 *Free for Personal Use + Resale with Subscription*

&nbsp;

---

👥 Community

---

🌟 *Adore this model? Show some love to Rob, the one-man creative force behind Makers Mashup, and dive into more maker adventures!* 🌟

🎥 **Watch & Subscribe on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1)** - Assembly videos, tutorials, and much more. Don't miss out on new content!

🔗 **Join the Creative Journey on [Thangs.com](https://www.thangs.com)** - Follow me for the latest models and exclusive content.

🤝 **Engage with the [Community Discord](https://discord.gg/ZDKq5N2)** - Get help and advice from a large and vibrant community. Build anything with the support of fellow makers!

📲 **Get Social with Makers Mashup** - 🐦 [Twitter](https://twitter.com/MakersMashup) | 📸 [Instagram](https://www.instagram.com/makers_mashup/) | 👍 [Facebook](https://www.facebook.com/MakersMashup) - See work in progress, prints, and more.

❤️ **Support the Channel & Creator** - Your support makes a difference!
   - 🤝 [Patreon](https://www.patreon.com/makersmashup) – Support my ongoing work and get access to exclusive content!
   - 💸 Drop a tip: [Ko-fi](https://koji.to/k/8E9J)
   - 🛍️ Shop on Amazon? Click [this link](https://amzn.to/429HusI) before your next purchase. It helps the channel at no extra cost to you!

🔓 **Unlock Incredible Benefits**
   _with a Paid Subscription on [Thangs.com](https://www.thangs.com), or Select Tiers on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1) or [Patreon](https://www.patreon.com/makersmashup)_

   - Resale Abilities
   - Early Access to Models
   - Request New Models
   - Exclusive Discord Channel for Supporters with Behind-the-Scenes Content

🚀 *Let’s build, share, and grow together!* 🚀










wazzy vase.stl

A new vase I created out of a playing card diamond shape. I printed this with .3 layers using a .6mm nozzle.
I like how it turned out with the tricolor filament.
I hope you enjoy this model!
DWTC

Planters and Pots

Gracewindale-planter-2.stl

Waved vase

Dimensions: 10,5cm diameter x 20cm high.
Printed with 3 walls and 5% infill.

Mushroom vase “Gleophyllum Abietinum”

**A unique vase for flowers.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 168 x 165 x 216 mm – has a wall thickness of 2 mm
- Smaller (80%): 134 x 132 x 173 mm – has a wall thickness of 1.6 mm
- Minimum size (60%):  100 x 99 x 130 mm – has a wall thickness of 1.2 mm
- Everything smaller than that is not tested but probably possible

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 270g
Print time: (100% scale): 22h

Material usage (80% scale):160g
Print time: (80% scale): 13h

Material usage (60% scale): 80g
Print time: (60% scale): 7h

Material: PLA
Print direction: stl is rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none

Watertight printing: If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), increase print temperature, check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram


Flowers

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

HueForge - Pink Peony

View 11 new models

SPIRAL PLANT POT

Aztec Pattern -Taper Vase

Calla Lily Flower (Vase Mode)

45 mirror vase 001.stl

Doublevase classic v1.stl

Doublevase

View 10 new models

View 72 new models

geometric vase

View 12 new models

Oblique vase #FunctionalArt

Affection Arc - U Shaped Modern Vase

Holy Moly! - Modern Vase

wazzy vase.stl

View 143 new models

Waved vase

Mushroom vase “Gleophyllum Abietinum”

View 31 new models