Baby Basilisk (Long) - Articulated Snap-Flex Fidget 

This baby basilisk just can't wait to be king of the serpents.  Until then, he's content to lounge about and strike a pose for you and your friends.

This flexible, articulated fidget toy incorporates the Mimetics 3D Snap-Flex joint, allowing each body segment to wiggle freely OR snap into a fixed position to maximize your fidget experience.

This Baby Basilisk is the first in a line of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.  

Stick around for more fun Snap-Flex models in the future.  I'd love to hear your feedback and how we can improve this model together moving forward.

This model is only available for personal use. 
 If you would like to sell physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

Llamacorn - Hatchling

CW3D Lllamacorn Hatchling.stl

Rose '23 Tadling

floral-tadling-set-2023-rose-baby-tadling-keychain.stl

Slinky (2 sizes)

Large Slinky.stl

Strawberry Tiny Spider

Strawberry_TinySpider.stl

Narwhal - Hatchling

CW3D SANTA_Narwhal Hatchling.stl

Baby Sunflower Dragon

Cinderwing3D baby_winged_sunflower_MMU.3mf

Lilypad Stand

cinderwing-crystal-lilypad-crystallilypad-allinone.stl

Baby Dark Heart Dragon

Cinderwing3D Baby_DarkHeartDragon.stl

Fidget Worms

Fidget Worm 15 Segment Tight Fit.stl

Wicked Tadling

wickedwing_tadling.stl

Reindeer - Hatchling

CW3D Reindeer_Both Hatchling Colors.3mf

Walrus - Hatchling

CW3D SANTA_Walrus Hatchling.stl

Tadling Earrings Community Mod

tadling-earring-community-mod-crystalwing-tadling-earing-6mm-jumpring-scaled.stl

Baby Sushi Dragon

Cinderwing3D Baby Sushi Dragon.stl

Fidget Flower ( No Supports )

Fidget Flower by BODY3D.stl

Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Short Bony Basilisk: 
Coming Soon
Loose Tolerance Short Bony Basilisk: 
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Short Bony Basilisk, be sure to check out it’s more mature, older sibling, the :ong Bony Basilisk:

Tight Tolerance Long Bony Basilisk: 
https://than.gs/m/936921
Medium Tolerance Long Bony Basilisk: Coming Soon
Loose Tolerance Long Bony Basilisk: 
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Fidget

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Baby Basilisk (Long) - Articulated Snap-Flex Fidget

Llamacorn - Hatchling

Rose '23 Tadling

Slinky (2 sizes)

Strawberry Tiny Spider

Narwhal - Hatchling

Baby Sunflower Dragon

Lilypad Stand

Baby Dark Heart Dragon

Fidget Worms

Wicked Tadling

Reindeer - Hatchling

Walrus - Hatchling

Tadling Earrings Community Mod

Baby Sushi Dragon

Fidget Flower ( No Supports )

Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

M41A Pulse Rifle Keychain — Functional Blaster Toy

Cat - Cinder Hatchling

Drakaryn Articulated Dragon